Search:

Type: Posts; User: tijgert

Search: Search took 0.00 seconds.

  1. That seems logical... I'll give it a try then.

    That seems logical... I'll give it a try then.
  2. I suppose technically speaking the sets are...

    I suppose technically speaking the sets are unmatched as G.Skill didn't take four consecutive sets of the assembly line.
    However if you involve real technics then if the sets aren't too far apart...
  3. True, but if the system is not working as...

    True, but if the system is not working as intended then not updating will never fix anything.
    Not updating because it already doesn't work is faulty reverse logic.
  4. Manual Vcore does nothing for me, still switches...

    Manual Vcore does nothing for me, still switches off.
    I hear CPU SVID support on gives too high voltage to the CPU so I'm not willing to fiddle with that much.
  5. I have 2 sets (so 4 sticks) of the 4133 running...

    I have 2 sets (so 4 sticks) of the 4133 running at XMP and all is stable... Lucky I guess...
  6. I've got the same weird issue, but I don't unplug...

    I've got the same weird issue, but I don't unplug the PSU after I shut down.
    I use my X Hero WiFi an 8700K and an Enermax 950W PSU.
    When I cold boot in the morning it POSTS and get's to the blue...
  7. Well, fixed it. Seems I somehow got some nail...

    Well, fixed it.
    Seems I somehow got some nail polish on 1 little island on the bottom. Wouldn't wipe off as it dried and was virtually invisible.
    Found it with bright sunlight and my Aliexpress...
  8. So you got that just with the basic few timings?...

    So you got that just with the basic few timings? You didn't change anything else?
  9. I got the same sticks.

    I agree with Travisel above, I have the same sticks on bios 1003 and 1101, works fine with XMP at 4133.
    Not updating the bios is silly, the new bioses are for memory stability mostly.
  10. If it won't post at 4133 you may need the exact...

    If it won't post at 4133 you may need the exact 4133 timings, which I happen to have as I have the 4133 kit.

    Would you do me the favor and then send me the SPD info from your 4266 kit? Use...
  11. 1st PCIe slot (x16) only works at x2 with my Aorus 1080Ti...

    I have this pretty Maximus X Hero (Wi-Fi AC) motherboard paired with my Gigabyte Aorus GeForce GTX 1080Ti Xtreme Edition 11G.
    The card is in the 1st PCIe slot and both parts support PCIe 3.0 speeds...
Results 1 to 11 of 11