Search:

Type: Posts; User: FULLMETALJACKET7

Page 1 of 13 1 2 3 4

Search: Search took 0.01 seconds.

  1. Good to hear that! Many times the problem is just...

    Good to hear that! Many times the problem is just bad heatsink seating. If it overheats right after repasting, just retry a couple of times and it might solve the problem.

    The paste should last at...
  2. Regular paste on the vrms is not really ideal...

    Regular paste on the vrms is not really ideal because usually there's a gap between the heatsink and the components. Regular paste isn't thick enough to fill that gap without dripping out over time....
  3. I would recommend Thermal Grizzly Kryonaut or...

    I would recommend Thermal Grizzly Kryonaut or Arctic MX-4. Any other name brand should work just fine though. As for the vrms, you can either use K5pro or thermal pads. K5pro is easier to use but not...
  4. Tjmax is the maximum temperature a cpu can reach...

    Tjmax is the maximum temperature a cpu can reach before throttling or shutting down. I never said it was related to soldering. If you hit tjmax too often you will kill the chip on the long run, plain...
  5. It's going to last 10 years no problem. If it's...

    It's going to last 10 years no problem. If it's not hitting tjmax, it's all good. You're not going to kill the chip by running it on mid 90c. It will be completely useless by then, except for maybe...
  6. They usually apply something like K5pro on the...

    They usually apply something like K5pro on the vrms and regular thermal paste on the dies. It doesn't matter which one you use, as long as it is some good quality paste. The thermal compound is not...
  7. If you removed the heatsink you have to put fresh...

    If you removed the heatsink you have to put fresh thermal paste on both, so essentially you're repasting. Clean the dies and apply fresh paste. Don't worry about that protective plastic thing.
    Mid...
  8. So this happens only while playing videos or...

    So this happens only while playing videos or playing games too?

    Looks more like a driver issue.*
  9. Air doesn't flow through those pipes. It's just a...

    Air doesn't flow through those pipes. It's just a liquid vapor that travels from one end to the other when the pipe heats up and cools down, basically.
    If it's not totally pinched, it should be fine.
  10. Oh, forgot to mention. My 1070 runs on Micron...

    Oh, forgot to mention. My 1070 runs on Micron vram.
    But maybe it's related to the lcd display, who knows at this point...
  11. It's going to be kinda hard to find a replacement...

    It's going to be kinda hard to find a replacement since it's a new model. In a few months you should see them popping up on aliexpress.
    Replace the thermal paste since you're already at it. Can't...
  12. According to GPUz, vbios version 86.04.54.00.0c...

    According to GPUz, vbios version 86.04.54.00.0c (I uploaded it on techpowerup's vbios database a few months ago). The LCD panel is an LG/Philips LP156WF6, hardware id LGD046F.
    It's undervolted, if...
  13. Update: Still no bsod. Had to restart it...

    Update: Still no bsod. Had to restart it yesterday because I installed something that required a restart. It's been on for a little over a week now.
  14. Sticky: Use this tool from Microsoft and block the...

    Use this tool from Microsoft and block the update.
    http://download.microsoft.com/download/f/2/2/f22d5fdb-59cd-4275-8c95-1be17bf70b21/wushowhide.diagcab

    You can also block automatic device drivers...
  15. Mine was set to turn off the screen after 10mins...

    Mine was set to turn off the screen after 10mins and sleep after 30mins. Changed it to 45mins if that makes any difference.
    It's going strong since Wednesday btw.
  16. Replies
    7
    Views
    261

    Those latest bios updates being pushed by Asus...

    Those latest bios updates being pushed by Asus are related to this: https://www.asus.com/support/FAQ/1040162
  17. If the GPU is running at 95c, you can bet that's...

    If the GPU is running at 95c, you can bet that's your problem right there.
    Install a monitoring software with an overlay preferably and check your temps and clocks while gaming.
  18. Try another movie. Might sound like a dumb...

    Try another movie.

    Might sound like a dumb suggestion, but maybe it's just a badly encoded file you have there.
  19. I recon there's a bug in the drivers but I don't...

    I recon there's a bug in the drivers but I don't think it affects 100% of the users. Far from it, actually. Many people are reporting the issue but many, many more are doing just fine and are totally...
  20. I'm on 431.18 right now. I'm not updating to the...

    I'm on 431.18 right now. I'm not updating to the latest one yet(431.36) because it hurts performance for pascal users. I did what you suggested but it's still going strong. ~20hrs uptime so far. It's...
  21. It shouldn't be overheating and throttling like...

    It shouldn't be overheating and throttling like that out of the box. You can try undervolting it but I don't think it would bring the temperatures down enough into the safe zone.
    For starters, try...
  22. There is your problem. It's throttling.

    There is your problem. It's throttling.
  23. You mean all (asus) laptops with a dedicated...

    You mean all (asus) laptops with a dedicated nvidia gpu and no optimus? How can I replicate the issue, because mine never had a bsod except when I was messing around with cpu voltages. No optimus...
  24. That's normal and the "lag" has nothing do to...

    That's normal and the "lag" has nothing do to with the battery charging state.
  25. Start by undervolting both CPU and GPU.

    Start by undervolting both CPU and GPU.
Results 1 to 25 of 322
Page 1 of 13 1 2 3 4