Search:

Type: Posts; User: TheNerdBench

Page 1 of 18 1 2 3 4

Search: Search took 0.01 seconds.

  1. Have you tried bench testing this motherboard...

    Have you tried bench testing this motherboard outside of the case? More than likely there is an issue with a standoff being located in the wrong position. See the link on bench-testing in my...
  2. Hi Multisync, When Windows is not working are...

    Hi Multisync,

    When Windows is not working are any messages being displayed?

    Nate152 has a point that I would investigate. There has been memory issues on the AMD-based boards where the water...
  3. Ditto on what FZero stated...I'm wondering if...

    Ditto on what FZero stated...I'm wondering if your system is having difficulty getting through the IROG3 firmware update? Maybe you could try to re-flash the BIOS or maybe return to an earlier...
  4. Sorry, DVM=Digital Volt Meter :) Did you pull...

    Sorry, DVM=Digital Volt Meter :)

    Did you pull the motherboard from the case so you can "bench test" it? I ask because more than once a standoff was "misplaced" causing the MB not to power-up :)
  5. Greetings, I would suggest using the...

    Greetings,

    I would suggest using the bench-testing approach to building up a system; see web-link in my signature.

    The more common things to look our for...
    0) do you have power going to the...
  6. Hum...odd. Your description made it sound as your...

    Hum...odd. Your description made it sound as your rig was locking up during the POST even before you started loading the OS.

    Thanks for posting back your findings too.
  7. Replies
    2
    Views
    6,113

    Welcome to the ASUS ROG Forum, About the...

    Welcome to the ASUS ROG Forum,

    About the comment of "rever the bios back to stock" I will assume that you are OCing? If that is the case let's leave the default settings until your system is...
  8. Greetings and welcome to the ASUS ROG Forum, ...

    Greetings and welcome to the ASUS ROG Forum,

    With the FX-9000 series CPUs you need to populate BOTH the 4-Pin and 8-Pin EATX12V connectors. I'm going to guess this is the main problem.

    Also it...
  9. Replies
    1
    Views
    1,262

    I am sorry to report NO...which is why I went...

    I am sorry to report NO...which is why I went with an Intel-based board with IS supported.

    I do know that the Asus Crossblade RANGER board does support the ROG Panel but that is a APU FM3+ based...
  10. May I suggest that you access the BIOS and see if...

    May I suggest that you access the BIOS and see if your storage devices are detected as a start...if not then you have a problem with:
    1) the data cable is unplugged either on the motherboard or the...
  11. Crap...that is right that someone at ASUS thought...

    Crap...that is right that someone at ASUS thought it would be a great idea to set the memory option for ECC as being enabled as the default!

    Glad you got the system going and I will need to...
  12. With the rig sitting in the BIOS the current...

    With the rig sitting in the BIOS the current cooling should be fine. With that said let's just try to get this system not to freeze in the BIOS.

    Try this if you have not already:
    0) force the...
  13. I think you are dealing with maybe two different...

    I think you are dealing with maybe two different issues. With that said do you have a spare PSU laying around that you could try...seeming you had some power outages I would start with that first.
    ...
  14. Try this... I am in the process now of...

    Try this...

    I am in the process now of installing Windows 32-Bit on a CHFV motherboard, follow the process below:

    First from the Asus website download the AHCI/RAID drivers to USB Flash Drive...
  15. For the FX-8000 series CPUs with no OCing you can...

    For the FX-8000 series CPUs with no OCing you can "get away" with using only the 8-Pin Aux CPU power but with the FX-9000 series CPUs you will need to have ALL Aux CPU Power Connectors going...the...
  16. Replies
    8
    Views
    5,730

    Greeting Pondake, Here are a few more options...

    Greeting Pondake,

    Here are a few more options to try..

    Are you sure that you followed the directions exactly...formatted the USB drive for FAT32 (the default is NTFS)?
    See page 2-12 of the...
  17. Hi and welcome to the ASUS ROG Forum, Thanks...

    Hi and welcome to the ASUS ROG Forum,

    Thanks for posting a photo but it is really hard to tell...do you have BOTH the 8-Pin and 4-Pin EATX12V connectors "populated"?

    Also just for good measure...
  18. Replies
    7
    Views
    20,529

    Hi Vagility, Let's go into troubleshooting...

    Hi Vagility,

    Let's go into troubleshooting mode...you keep getting the iRog message as that is also updated with the BIOS and that task will need to be completed before you are able to POST and...
  19. Replies
    10
    Views
    4,514

    I am going to guess that your nic isn't getting a...

    I am going to guess that your nic isn't getting a valid IP address from your router/switch device.

    Next time this happens look at the network connection, not sure what version of Windows you are...
  20. Replies
    1
    Views
    2,552

    Did you configure the BIOS under the BOOT menu...

    Did you configure the BIOS under the BOOT menu and configure the UEFI options. Also I believe that if you change this option in the BIOS that you MAY need to redo and installation of Windows 8.x
    ...
  21. Replies
    3
    Views
    2,916

    Welcome to the ASUS ROG Forum, First I have...

    Welcome to the ASUS ROG Forum,

    First I have limited experience with the Windows 8.x products but I am not at all familiar with the messages your are receiving..are you using a "genuine" copy of...
  22. Replies
    8
    Views
    7,325

    Greetings Prometheus1, I am in the process now...

    Greetings Prometheus1,

    I am in the process now of installing Windows 32-Bit on a CHFV motherboard, follow the process below:

    First from the Asus website download the AHCI/RAID drivers to USB...
  23. Crossblade Ranger: RAID Woes with Windows 7 32-Bit

    Greetings all,

    I thought I would share some insight on the Asus Crossblade Ranger motherboards when configuring RAID-1 as it has been a bit of a challenge!

    While I do have the configuration...
  24. Replies
    2
    Views
    1,929

    I would bench test the motherboard as you may...

    I would bench test the motherboard as you may have a stand-off that is misplaced that is "shorting" out the motherboard. Also as suggested make sure both the Aux 8-Pin CPU Power Connector is...
  25. Replies
    14
    Views
    5,202

    You have received some very good advice from the...

    You have received some very good advice from the guys above Gary.

    Now my two cents :)

    1) I also know that by default the memory speed is set for Auto which caused BSOD in Windows 7; make sure...
Results 1 to 25 of 435
Page 1 of 18 1 2 3 4