Search:

Type: Posts; User: Arne Saknussemm

Page 1 of 20 1 2 3 4

Search: Search took 0.09 seconds.

  1. Replies
    1
    Views
    69

    Check the mounting of the new cooler....maybe...

    Check the mounting of the new cooler....maybe remount....ayart from scratch...could be CPU is being displaced in socket.

    Also check all other connections and make sure board is not contacting...
  2. Yep! No need to conform to stress test opinions...

    Yep! No need to conform to stress test opinions ;)

    If your system is stable for what you need it to do then all good...it's stable. Stress tests are only usefull in providing a a kind of top end...
  3. V core is pretty much 1 to 1 for your OC these...

    V core is pretty much 1 to 1 for your OC these days. Of course general system stability helps...with SA and IO volts being key for RAM. But it is pretty much Vcore that gives you 100 mhz increase......
  4. Well....I've not had a play on a GB board...

    Well....I've not had a play on a GB board recently....not sure what their llc settings are like...I guess you'd just have to experiment carefully raising vcore or lowering llc.
  5. Are you setting manual voltage...or adaptive? And...

    Are you setting manual voltage...or adaptive? And what power plan settings...
    Any avx offset....latest Realbench and prime run avx and will pull a lot to run at high ghz.
  6. These CPUs are very Vcore dependent yes. They...

    These CPUs are very Vcore dependent yes.

    They also have their own algorithms for running depending on conditions.

    Check this thread for an intro to complexity...
  7. That's all core stability so you may run less for...

    That's all core stability so you may run less for individual core OCs.

    I've used CPUz and HWiNFO...for software readings...for what they are worth. RealBench is a good whole system stress test....
  8. From what I've seen of these CPUs...real...

    From what I've seen of these CPUs...real stability at 5.2GHz takes more than 1.3v on average.
  9. Replies
    11
    Views
    890

    :rolleyes: :rolleyes: :rolleyes:

    :rolleyes:
    :rolleyes:
    :rolleyes:
  10. Replies
    1
    Views
    83

    BIOS chips do die sometimes. Get a...

    BIOS chips do die sometimes.

    Get a replacement...BIOS24 is a good place to go
  11. Replies
    1
    Views
    131

    I cant remember exactly...but its called "global...

    I cant remember exactly...but its called "global c states" and its in one of the "common options" parts of bios advanced tab....
  12. How did you update? In any case...I would...

    How did you update?

    In any case...I would reflash the BIOS...BIOS flashback method.obviously with a fresh download of the latest version.
  13. At defaults at that kind of normal room temp the...

    At defaults at that kind of normal room temp the temp should be a stable 30 degrees or close at desktop idle.

    Always worth checking cooler is mounted well
  14. 35 seems a touch too hot to me...but depends on...

    35 seems a touch too hot to me...but depends on ambient...what is room temp?
  15. Replies
    6
    Views
    558

    5.1 at 1.35 is pretty typical...good cooling and...

    5.1 at 1.35 is pretty typical...good cooling and a bit of luck will get 5.2...maybe up to 1.38v...

    Lottery win will get 5.3

    The thermals are better than K...

    Turn off hyperthreading if you...
  16. Replies
    6
    Views
    210

    Have you tried a different PSU? I'd also...

    Have you tried a different PSU?

    I'd also reflash BIOS...BIOS flashback method...and check motherboard battery
  17. For Haswell E I'd try the last of the 2XXX BIOSes

    For Haswell E I'd try the last of the 2XXX BIOSes
  18. You can try to set DOCP profile in BIOS.. ...

    You can try to set DOCP profile in BIOS..

    However 3600 is pushing it for a lot of ryzen memory controlers so you may need to tweak dram voltage and/or soc voltage.

    Or try 3200 and tighten...
  19. If you want to see timings in OS use...

    If you want to see timings in OS use memtweakit...or ASRock do a similar program...
  20. Thread: Ram

    by Arne Saknussemm
    Replies
    13
    Views
    403

    OK...let me know how it goes...for sure you want...

    OK...let me know how it goes...for sure you want to try everything....these boards aren't cheap!
  21. I'd check the GSkill RAM configirator for the MB...

    I'd check the GSkill RAM configirator for the MB
    ...
  22. Depends.... Look up interleaving.. Also T...

    Depends....

    Look up interleaving..

    Also T topology boards will run 4 sticks better often...
  23. You will need the antenna...and a driver I presume

    You will need the antenna...and a driver I presume
  24. I would go for the Maximus XI Extreme as the...

    I would go for the Maximus XI Extreme as the premium build option for the 9900KS....top of the line...as you are used to that level of features...quality etc.
  25. The ideal is to always have more memory available...

    The ideal is to always have more memory available than is being used by your applications...so I'm happy to say that looks OK...you don't want to be in a situation where you are pushing the limits of...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4