Search:

Type: Posts; User: mdzcpa

Page 1 of 20 1 2 3 4

Search: Search took 0.02 seconds.

  1. The 3 boot cycle is normal on all M11 boards. If...

    The 3 boot cycle is normal on all M11 boards. If you keep your PSU powered after a shut down the 3 boot cycle stops as the memory training parameters are retained.

    03/04 sleep errors normally...
  2. Set you OC manually as suggested. Select Sync...

    Set you OC manually as suggested. Select Sync all Cores, and set Multiplier to 49 (if your find your crashing at 5000Ghz).
  3. Replies
    2
    Views
    84

    Your CPU is working as normally. Different games...

    Your CPU is working as normally. Different games have different load needs on the CPU. Nothing to worry about.
  4. One of the keys to overclocking is using the...

    One of the keys to overclocking is using the lowest possible voltage for any given clock speed. Pre set OC profiles tend to hit the voltages pretty hard in order to work on a majority of CPUs. It...
  5. Sounds like a heat issue. Are you making sure...

    Sounds like a heat issue. Are you making sure the laptop is drawing in cool air? Are the intake vents unobstructed?
  6. Replies
    1
    Views
    129

    Those temps are completely safe.

    Those temps are completely safe.
  7. Install Live Dash as an administrator. Try to...

    Install Live Dash as an administrator. Try to Right click and run LD as Administrator

    Although Aura, AI Suite, Live Dash were a mess with huge problems, Armory Crate is worse in my opinion.
  8. Your not going to find an easy answer. The issue...

    Your not going to find an easy answer. The issue is that with sleep your memory must stay powered to hold the system info values for wake. When the ram is powered the lights are on. You have 3...
  9. Replies
    8
    Views
    246

    I use a combo of: AI Suite III 3.00.28, Live Dash...

    I use a combo of: AI Suite III 3.00.28, Live Dash 1.04.01 and Lighting Control 1.07.35.

    You need Live Dash to control the Ryujin screen

    I have no issues with GPU Tweak and the above combo to...
  10. Replies
    19
    Views
    2,372

    The armory crate idea is ok (if you accept root...

    The armory crate idea is ok (if you accept root kit stuff), but the execution has been horrendous. Oddly enough I have all my stuff working using old programs. I have the M11 Hero, Ryujin 360,...
  11. What you have sounds like general system...

    What you have sounds like general system instability. I know you've run memtest ALOT of times, but I'm questioning the RAM or CPU. What exactly is your Gskill kit number? All 4 matched set? Do...
  12. Wow! Not good. Pretty scary for a device you...

    Wow! Not good. Pretty scary for a device you should be able to leave unattended.
  13. If you want the best possible VRM on an ASUS Z390...

    If you want the best possible VRM on an ASUS Z390 mobo, then the XI Extreme is what you want. The Code, Formula and Hero all have the same VRM design. However, keep in mind that the VRM design on...
  14. Replies
    15
    Views
    649

    You need this...

    You need this
    https://www.lowes.com/pd/GRABIT-Grab-It-1/1000967290
  15. Replies
    4
    Views
    269

    I had assumed Fan Expert left residual changes to...

    I had assumed Fan Expert left residual changes to the fan profiles in the BIOS. Glad to hear you sorted it.
  16. Replies
    4
    Views
    269

    If you ran fan tuning, they might have not been...

    If you ran fan tuning, they might have not been spinning because temps were low and you had silent mode checked. Under silent mode case fans can spin to zero when temps are down. Another thing...
  17. Replies
    2
    Views
    344

    You cannot in AI Suite. A simple solution would...

    You cannot in AI Suite. A simple solution would be to set the fans curves to react to the temps reported by AI Suite (which are the same temps reported in the BIOS). Simply set the fans to come on...
  18. Replies
    9
    Views
    2,284

    What make/model fan do you have connected? What...

    What make/model fan do you have connected? What fan header?


    Have you ran the Fan Tuning module?
  19. Replies
    10
    Views
    632

    Remove CPU and inspect socket for any bent pins....

    Remove CPU and inspect socket for any bent pins.
    Clear CMOS
    Double check PSU connections **
  20. Replies
    10
    Views
    632

    Just a tip for system builders and especially...

    Just a tip for system builders and especially those with water loops.... it's always best to boot the board outside of the case. Seat the CPU, RAM and GPU. Connect the PSU and your monitor and...
  21. For ****s and giggles.... try running MCE on...

    For ****s and giggles.... try running MCE on Auto, along with your other power parameter settings. Auto.

    Set your voltage to manual, LLC on 6 and give it a whirl. I've found better luck with most...
  22. Replies
    4
    Views
    656

    I changed to static to avoid the high CPU usage. ...

    I changed to static to avoid the high CPU usage. I wish they would improve this.
  23. Replies
    6
    Views
    1,175

    You have a pretty old motherboard there. You...

    You have a pretty old motherboard there. You will need to look around. It appears you may need to load AI Suite.

    Another alternative is to control the fans in your BIOS through Q Fan. I find it...
  24. Replies
    6
    Views
    1,175

    Fan Expert is all you need. Fan Expert is...

    Fan Expert is all you need. Fan Expert is included in the AI Suite.
  25. Thread: 9900K + XI Hero

    by mdzcpa
    Replies
    3
    Views
    336

    That AIO should do the job. I suggest you use...

    That AIO should do the job.

    I suggest you use the AVX Offset. It sounds like your gaming temps are ok. AVX tasks are causing your temp spikes.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4