Search:

Type: Posts; User: feedmeink

Page 1 of 8 1 2 3 4

Search: Search took 0.01 seconds; generated 4 minute(s) ago.

  1. What motherboard do you have

    What motherboard do you have
  2. Try setting TRFC to 350 and see if it can pass. ...

    Try setting TRFC to 350 and see if it can pass. You will see a decent gain lowering TRFC. But at that high of frequency you might be stuck where you are. Which is a really good overclock regardless
  3. Replies
    34
    Views
    1,195

    Try 14-15-15-36 at 3200.

    Try 14-15-15-36 at 3200.
  4. Replies
    34
    Views
    1,195

    That seems high for vccio and vccsa. I can't...

    That seems high for vccio and vccsa. I can't walk you through secondary timings. It is quite complicated. If this is of Interest to you. I highly recomend to search the web for definitions of...
  5. Replies
    34
    Views
    1,195

    1t is faster but realistically you wont see a...

    1t is faster but realistically you wont see a large difference. It might not work due to the processor or some odd secondary timings that the board sets on it's own. If you aren't familiar with...
  6. You are damaging your CPU running at that high of...

    You are damaging your CPU running at that high of voltage. Keep below 1.2
  7. Sent you a private message. I would not set...

    Sent you a private message. I would not set voltage that high. Try and keep voltages below 1.2. I recomend 1.12 to mitigate cooling. I have never taken this chip over 1.35. 1.35 running daily is...
  8. Replies
    2
    Views
    332

    Go to windows power plan. Set to balanced. Then...

    Go to windows power plan. Set to balanced. Then advanced settings. Select min and max power load settings. Set 0 or something small like 5% min and 100% max. This should dynamically adjust...
  9. Replies
    34
    Views
    1,195

    You should be able to do 1t timings. I would...

    You should be able to do 1t timings. I would keep your old setting but put to 1t and see how it goes. If it doesnt pass try bumping voltage to 1.38. Have you adjusted any secondary timings?
  10. It depends on motherboard and processor. If you...

    It depends on motherboard and processor. If you want higher frequency and super tight timings you wanna go with 8gb sticks. The more sticks you have in the system the more limited it can become. ...
  11. Double check temperature of each core using...

    Double check temperature of each core using coretemp or hwinfo64. It is possible one of your components is thermal throttling and causing shut down. If it is abnormally high, re apply thermal paste
  12. Memetest86 isn't accurate. Try memetest pro or...

    Memetest86 isn't accurate. Try memetest pro or RAMTEST. If you pass those then it is most likely something else
  13. Go to external digi power control. There is an...

    Go to external digi power control. There is an option to set power control for dram to 140%. That's my only other suggestion
    Otherwise you will have to down clock the frequency
  14. You will have to loosen timings or downclock...

    You will have to loosen timings or downclock speed.
  15. The more sticks you add, the more information is...

    The more sticks you add, the more information is traveling and being dispersed through the IMC. Try bumping up dram voltage to 1.38 and vccio and vccsa to 1.18. Try not to go above 1.2 for every...
  16. What exactly does it do? Could be a number of...

    What exactly does it do? Could be a number of things.
  17. Your previous set up was an i7. Now it is n An...

    Your previous set up was an i7. Now it is n
    An 18 core processor. The IMC shares with your memory. 9980 is more complex than i7
  18. If you are uncomfortable making changes, I...

    If you are uncomfortable making changes, I suggest a different mobo or ram. Or you can try making the changes I mentioned and see what happens. Hope it works out for you. The qvl isn't the only...
  19. Replies
    45
    Views
    2,742

    I couldn't respond to threads for 2 weeks. Just...

    I couldn't respond to threads for 2 weeks. Just started working end of last week
  20. I have 7980xe on rampage vi extreme. Basically...

    I have 7980xe on rampage vi extreme. Basically same cpu. What do you have your cache set to? It could also be avx. What is your avx offsets?
  21. What is vccio and vccsa (system agent) voltage...

    What is vccio and vccsa (system agent) voltage set to? Try setting vccio and vccsa to 1.12 and see if that helps
    Avoid going beyond 1.2
  22. 4 x 16 sticks will take some playing around to...

    4 x 16 sticks will take some playing around to get stable. Bump up voltage to 1.38 and see if that helps. I am willing to bet if you had one or two sticks of this ram, xmp would work fine. If...
  23. Replies
    1
    Views
    445

    Delid with liquid metal would help

    Delid with liquid metal would help
  24. Replies
    9
    Views
    440

    You did the right thing. Connections are...

    You did the right thing. Connections are propper. Also make sure in bios fan for rad are the speed you are looking for. 50c is hot for idle temps for sure. With that size of rad, I would think 35...
  25. Possibly your display cord is dying. If you have...

    Possibly your display cord is dying. If you have a spare that you know works, try changing out the display cord and see if it keeps happening.
Results 1 to 25 of 188
Page 1 of 8 1 2 3 4