Search:

Type: Posts; User: mdzcpa

Page 1 of 20 1 2 3 4

Search: Search took 0.02 seconds.

  1. Replies
    9
    Views
    219

    Voltage looks a little too high under load with...

    Voltage looks a little too high under load with some cores at 1.4v. Stock voltages would be 1.25v - 1.3v.

    The 10850 puts out a lot of heat and requires solid cooling. I would try removing your...
  2. Replies
    180
    Views
    15,970

    These posts give me great hope that the new...

    These posts give me great hope that the new Zen3/570 platform just needs a bit of tweaking. Thanks for sharing the positive results!
    Shamino and the team will get this sorted soon.
  3. Appreciate the reply SS. What's with the rash of...

    Appreciate the reply SS. What's with the rash of posts about whea errors and spontaneous reboots? Are these just tuning issues with the new Zen3 chips? Did I jump into the AMD forum at a...
  4. I appreciate the encouragement and specific tips....

    I appreciate the encouragement and specific tips. I will be reading here in the AMD f470/570 forum a lot in the coming weeks as I wait for the CPU/Mobo/GPU to come into stock for a January build...
  5. I appreciate the thoughts of everyone that took...

    I appreciate the thoughts of everyone that took the time to answer.

    To be honest, I am absolutely certain I posses the skills necessary to tweak the AMD platform and find great stability if indeed...
  6. Is AMD really ready for prime time?? I'm not so sure based on what I see

    Hey guys,

    I've been a member here for about forever. I'm a very experienced system builder that used to competitively overclock years back. The last few years I've dialed way back and now build...
  7. That's a nice chip!

    That's a nice chip!
  8. None of those temps look bad at all. The only...

    None of those temps look bad at all. The only oddity is that the CPU, VRM and MB temps are all the same.
  9. Replies
    4
    Views
    169

    It may be a keyboard issue. Have you tried...

    It may be a keyboard issue. Have you tried changing USB ports for your keyboard.
  10. The mobo may be able to support the ram. Are you...

    The mobo may be able to support the ram. Are you certain the IMC of your CPU can handle 4800mhz??
  11. Replies
    7
    Views
    301

    Win 10 set to balanced Set BIOS defaults This...

    Win 10 set to balanced
    Set BIOS defaults

    This should work.

    You say "almost never" ...meaning the CPU does step down sometimes? If so, its not a setting preventing it. You may have a hanging...
  12. Keep in mind that anything over 2133mhz is...

    Keep in mind that anything over 2133mhz is overclocking the memory. Success in achieving overclocks on the memory are dependent on the memory controller of the CPU. Regardless of how high your...
  13. Replies
    6
    Views
    418

    Just an observation. There is WAY to much paste...

    Just an observation. There is WAY to much paste applied in your photo. I am not sure who did that you in the past, but that is a MESS. Paste should be applied only to the center chip or integrated...
  14. Replies
    7
    Views
    1,544

    The fan built into the block has nothing to do...

    The fan built into the block has nothing to do with pump speed at all. As has been previously stated, there are 3 curves you can adjust. One is for the radiator fans, a second if for the block fan,...
  15. Replies
    17
    Views
    1,313

    This is completely false. *Both my pump speed and...

    This is completely false. *Both my pump speed and my radiator fan speed are controlled by my reported CPU temps. *They rise and fall with CPU temperature. In addition, should I choose, I can set my...
  16. I completely concur. The idea is to see if the...

    I completely concur. The idea is to see if the memory will run at rates speed. If so you will know your cpu overclock is affecting your memory stability. *If they run at stock cpu speed, press your...
  17. Using XMP will always overwrite your manual...

    Using XMP will always overwrite your manual settings. XMP sets the speed, memory timings and voltages.

    What specific memory kit do you have (the gskill part #)??

    Keep in mind that although the...
  18. Replies
    18
    Views
    1,033

    Nice!

    Nice!
  19. I do not think that is normal. I have 2 of these...

    I do not think that is normal. I have 2 of these GPUs and neither make that noise anywhere in the range. At 70% and higher they vibrate a tiny bit and make some noicse but no where near the vid...
  20. Replies
    26
    Views
    1,046

    Vinnie: If it is out of your budget you will...

    Vinnie:

    If it is out of your budget you will need to find another memory kit. However, as stated about, if you want to run 4 sticks of memory, it needs to be a 4 stick kit. never combine kits. ...
  21. What specific RAM are you running?

    What specific RAM are you running?
  22. Replies
    26
    Views
    1,046

    You should go to the Support Page for the 470-F...

    You should go to the Support Page for the 470-F and check the QVL (qualified vendor list)

    Here: https://www.asus.com/us/Motherboards/ROG-STRIX-X470-F-GAMING/HelpDesk_QVL/

    Review the memory QVL...
  23. Replies
    26
    Views
    1,046

    [I believe this is a memory issue as well. I...

    [I believe this is a memory issue as well. I took a quick look at the Memory QVL for the 470-F with a GEN 1 Ryzen and there are no supported 64GB kits that run at 3200Mhz.
  24. Replies
    18
    Views
    1,033

    it's hardware for sure. Nothing in windows would...

    it's hardware for sure. Nothing in windows would result in these symptoms.

    I agree with those above. Strip the system. Pull any PCIE cards, connect only your OS drive, try one stick of ram and...
  25. Replies
    3
    Views
    249

    Your current system, although aging, is well...

    Your current system, although aging, is well matched. What are you looking to accomplish? Are you looking to scale up resolution? Or looking for better FPS in more demanding games?

    If you could...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4