Search:

Type: Posts; User: handokovska

Search: Search took 0.00 seconds.

  1. Replies
    1
    Views
    247

    Cek the usb port if it loosy, Make sure...

    Cek the usb port if it loosy,
    Make sure before turn on the power, plug the usb boot...
    using EZ bios just drag the UEFI USB to the upper one... save and exit
    no need to advanced mode
  2. Not sure if the usb c can work with hdmi at...

    Not sure if the usb c can work with hdmi at once...
    Try to find its setting in BIOS,
    if using HDMI could work probably you can try to jump HDMi to other monitor, so it will need 2 hdmi cables....
  3. Replies
    4
    Views
    183

    it seems the sensor for battery have problems... ...

    it seems the sensor for battery have problems... have you try to see battery capacity via BIOS by pressing F2 at boot...?
    try install this ASUS Battery Health Charging ...
  4. Replies
    7
    Views
    221

    * the ASUS ,m2 screws are very cheap and SOFT...

    * the ASUS ,m2 screws are very cheap and SOFT metal be very careful not to strip them.

    KB[/QUOTE]

    Already strip them, thats the only way to release the old m2 ssd,
    after that i use solder to...
  5. Replies
    7
    Views
    221

    It's Done ... thanks...

    It's Done ... thanks
    https://rog.asus.com/forum/showthread.php?121158-Rog-gl702vmk-Upgrading-Original-128-nvme-ssd-to-cloned-1TB-nvme-M2-cant-boot-solved
  6. Done...!!! feels good... The key is to make a...

    Done...!!! feels good...
    The key is to make a windows recovery on usb.. it is need about 50Gb of usb and it can boot...
    leave the clone as it is, put again in the m2 slot.. after 2nd failed...
  7. Rog gl702vmk- Upgrading Original 128 nvme ssd to cloned 1TB nvme M2 cant boot?-solved

    I manage to replace the 128 nvme ssd, and put the new 1 TB nvme m2 cloned ones... (without breaking or damaging the old nvme ssd)
    However new Problem emerge.. the ROG bios can identify the new one...
  8. Replies
    7
    Views
    221

    I manage to replace the 128 nvme ssd, and put the...

    I manage to replace the 128 nvme ssd, and put the new 1 TB nvme m2 cloned ones... (without breaking or damaging the old nvme ssd)
    However new Problem emerge.. the ROG bios can identify the new one...
  9. Replies
    7
    Views
    221

    the hole is getting bigger, after try allen...

    the hole is getting bigger, after try allen wrench and other star type...
    i plan to put another tiny screw on top of it using solder or power glue...
    another plan is make a strip using miser but...
  10. same problem with gl702... and i check the...

    same problem with gl702... and i check the battery already swollen a bits... could that be the cause?
  11. can it use external/usb keyboard?

    can it use external/usb keyboard?
  12. Replies
    7
    Views
    221

    cant unscrew m2 screw gl702VMK

    the ssd comes with 128 Gb n already full now.. i get a 1 TB m2 2280 and already create a drive backup n boot disk...
    problem comes when trying to unscrew m2 screw , it cannot unscrew.. already try...
  13. Confirm run on gl 702vmk , i set to maximum...

    Confirm run on gl 702vmk , i set to maximum lifespan and the battery wont charge over 60%...
    too late actually, my battery already swelling/bulging and push th touchpad up about 2mm...
  14. GL 702VMK Touchpad melendung, kemungkinan karena baterai bengkak(swelling/bulging)...

    Pembelian Mei 2017, jadi garansi battery udah lewat....
    Ini kemungkinan selain karena overcharge juga karena suhu panas... soalnya lebih sering pakai Monitor external dan lid di tutup.
    walau...
Results 1 to 14 of 14