Search:

If you booted into windows with the onboard sound enabled, Windows may have automatically installed the drivers. You'd want to remove the install - look into Apps and Features. The Nvidia sound...

Which PCIe slot are you using? Did you overclock your Bus speed? Does the C6H computer have the same OS as the other computers? Is the computer case frame mostly made of metal?

According to this image...
http://images.bit-tech.net/content_images/2017/03/amd-ryzen-1800x-and-am4-platform-review/crosshair-diagram-1280x1024.jpg
The M.2 is separate from the other SATA slots.

I own a NZXT Kraken X62 AIO and it reports erroneous speed info to the motherboard, anywhere from 0 RPM to 168,750 RPM. Seems to be a problem with the manufacturer (Asetek) and since my device...

Go into the CBS section of the advance settings and set the Fail_CNT to 3. Is the ambient temperature cold?

Select Silent to Turbo, but don't select Manual.

What AIO are you using and what software are you using to control it? Can you cut the polling rate for AIDA in half? Disabling the Q-Fan for unused chassis fans headers seems to reduce the load on...

Are you running Corsair link software? What other system/GPU monitoring software are you using? Have you thought about using HWINFO instead?

I am finding that the ITE IT8665E eventually malfunctions over time due to monitoring software and I have to reboot to correct. I have to run monitoring software to make sure the chip isn't...

Have you used any software that modifies the DRAM RGB pattern? Do you still get the issue with the memory running at 2666 MHz?

I noticed when I moved from 1401 to 1403, my "auto" core voltages got bumped up a little. Not sure I like that because the average 1800x voltage is getting close to 1.4 volts without overclocking.

Did you use Asus Aura?

Are you using G.Skill RGB RAM? Are you aware of the problems running Aura and G.Skill software at the same time? The RAM SPD can become corrupted.

Geek Squad are just a bunch of salesmen who have...

BIOS 1403 is now official, so I suggest you update to that.

For a 1800X, with "Auto" under load, you should see the core voltages drop down to around 1.24 volts. If you are manually setting the voltage, you really don't want to see over 1.41 volts.

Are you plugging the transmitter in the top USB3.0 slots? There are setting in the BIOS for each USB slot - I think only the top slots are set to active by default.
Maybe there are other...

Code 24 is not an error...it means the BIOS has handed control over to the OS. Everyone has that code in Windows, although you might get a different code after resuming from sleep (e.g. code 40).
...

I have this error, but I don't have any boot or reboot speed problems. I assume it is just reporting the AMD SATA issue. I believe rapid mode is not supported on NVMe drives.

If you are playing...

Is Core boost off? Maybe disconnect the power and pull out the battery for awhile.

3.1 and 3.0 motherboard connectors are completely different.

Yeah...I noticed the OP was not taking people's troubleshooting advice other than putting the same 4 DIMMS into random slots and complaining that it doesn't magically work.

...and then you'll finally realise the memory is the problem? :p

The Google doc has only a handful of people with BIOS 1401. At this point, I think most people know what they are doing.

Due to the recent Intel release, don't expect manufacturers to spend much...

I would say use two DIMMs in the proper slots and see if you get the full 16GB. Then try the other two alone. Also try the other pair of slots on the board. You need to narrow down the problem to the...

If you decide to get a 3600Mhz kit, get the F4-3600C16Q-32GTZR which is Samsung B-die.

I have no idea what chip they are using in the CL17 version.