Search:

Type: Posts; User: Brack

Search: Search took 0.00 seconds.

  1. Replies
    4
    Views
    400

    Well today I went through all my hardware...

    Well today I went through all my hardware removing each component to test if it was the cause. Finally, I replaced my PSU and the system booted up normally.
  2. Replies
    4
    Views
    400

    Not sure if it matters, but when it reboots the...

    Not sure if it matters, but when it reboots the Q-Code sits on 99 for a few seconds, switches to 92 briefly, then back to 99 for less than a second before the reboot.
  3. Replies
    4
    Views
    400

    Thanks for the reply, but I can't even get to a...

    Thanks for the reply, but I can't even get to a Windows desktop right now. When I try to turn it on, it reboots a few seconds after the screen that says "Press del to enter BIOS" shows.

    It may...
  4. Replies
    4
    Views
    400

    PC Rebooting Before BIOS Entry

    A couple weeks ago my custom loop's pump died and as such my rig locked up and shut off while I was using it. After replacing the pump, my PC entered a reboot loop every time I powered it on that...
  5. Replies
    6
    Views
    370

    Hmm that's probably a good point of risk vs...

    Hmm that's probably a good point of risk vs reward. I'm not even pushing >1.4v anyway right now.

    I've seen recommendations of using something to seal any contacts on the top of the silicon if...
  6. Replies
    6
    Views
    370

    I was asking more about not using an IHS, and...

    I was asking more about not using an IHS, and using a delid die guard. Thanks for the IHS info though, hadn't seen those.

    This is my concern here. The corners of the socket.

    75535
  7. Replies
    6
    Views
    370

    Direct CPU cooling on Maximus X Formula?

    I'm curious if anyone has any experience with delidding and cooling the CPU directly with the Maximus X Formula?

    I'm considering doing this with an 8086k to get better temps, but after watching...
  8. Thread: Raid 0 M.2 Help

    by Brack
    Replies
    0
    Views
    321

    Raid 0 M.2 Help

    I'm having some issues with a new build. Any advice is much appreciated.

    I put together a build yesterday with a Maximus X Formula board and two 970 Evo M.2 SSDs in RAID 0 for my primary (and...
  9. Replies
    2
    Views
    1,908

    I believe the Power 4 Gear Hybrid is a power...

    I believe the Power 4 Gear Hybrid is a power settings manager. I haven't really played around with it much, but it doesn't appear to be the same as AI Suite.
  10. Replies
    2
    Views
    1,908

    Which AI Suite for G750JZ?

    I'm curious if any versions of AI Suite support the G750JZ laptop? There are no versions listed under the download support page. I figured since the laptop was ROG branded that at least some version...
  11. Replies
    4
    Views
    1,782

    Will do once I have a minute... Yes, I...

    Will do once I have a minute...



    Yes, I still experience the BSODs with only one card. I'm probably close to what the PSU can handle with both cards running, but I can stress test just fine...
  12. Replies
    4
    Views
    1,782

    Intermittent BSODs on Maximus VI Formula

    Hey Guys,

    I'm trying to solve an issue that has been haunting me since I built my new(ish) rig. Basically ever since I built it I've been getting random BSODs. The problem is it is so intermittent...
  13. Replies
    7
    Views
    2,038

    Thanks for the information Jeff. It makes more...

    Thanks for the information Jeff. It makes more sense now.
  14. Replies
    7
    Views
    2,038

    Well I managed a stable 4.5 GHz at 1.3v. I think...

    Well I managed a stable 4.5 GHz at 1.3v. I think that will suffice for now.

    I ran 3D mark and it is reporting my Maximum Turbo Core Clock as 4500MHz, but now my Reported Stock Core Clock is 800MHz...
  15. Replies
    7
    Views
    2,038

    Thanks, it seems to be working well at 1.25v. At...

    Thanks, it seems to be working well at 1.25v. At least I now have something stable to start from.
  16. Replies
    7
    Views
    2,038

    Currently it looks like I'm at 1.15v. What is a...

    Currently it looks like I'm at 1.15v. What is a bit? Should I try at something like 1.17, or 1.2?

    Sorry, just not sure what is too much.
  17. Replies
    7
    Views
    2,038

    First Time OC + BSOD

    Motherboard model: Maximus VI Formula
    UEFI Version: 1302
    CPU: i7 4770k
    Memory kit part number (s) and amount in GB: 16GB (2x8GB) 1866 (CMD16GX3M2A1866C9)
    GPU: EVGA GeForce GTX 780Ti 3GB...
  18. Replies
    2
    Views
    1,769

    Maximus VI Formula, Cant Update BIOS

    Hey Guys,

    When I boot my new Maximus VI Formula with my GTX 680 in the first PCI slot it won't recognize my GPU. I figured a BIOS update might help, but my ROG Connect button doesn't seem to do...
Results 1 to 18 of 18