Search:

Type: Posts; User: SMB_92

Search: Search took 0.00 seconds.

  1. X570 C8 Dark Hero Missing A-Volute Sound driver solution

    Hi folks,

    Wanted to report that after installing the Realtek drivers available on the support page for the Dark Hero, I was left with an "unknown device" in Device Manager (would only appear after...
  2. Replies
    63
    Views
    19,058

    Oh so your running with no AVX offset, I think...

    Oh so your running with no AVX offset, I think mine was requiring about the same in that Occt test for AVX but too hot so I bring offset to 2 for 5ghz to keep the 1.292v happy. Otherwise whea.
    ...
  3. Replies
    63
    Views
    19,058

    That's seems high for 5ghz? Or are you running...

    That's seems high for 5ghz? Or are you running more? I read that different CPUs have different VID behavior, that even with the settings / overrides on, if the processor is not happy with the volts...
  4. Replies
    63
    Views
    19,058

    My IMC is brilliant by the seems, I am able to...

    My IMC is brilliant by the seems, I am able to run my Gskill 3200 C15 kit at just 1.05v on both IO and SA. Any bsod I had during testing was all vcore and settings around that.

    Just noticed some...
  5. Replies
    63
    Views
    19,058

    If I go to 5ghz which I normally can at 1.29v, it...

    If I go to 5ghz which I normally can at 1.29v, it will shoot over to 1.4v at LLC 4. Previously it would only shoot to 1.33,and rarely at that. So I took that profile away for 4.8ghz.

    Pretty much...
  6. Replies
    63
    Views
    19,058

    Well I had this issue originally too (when i...

    Well I had this issue originally too (when i first setup the motherboard as new) , and to bring it back in check I had to enabled the SVID setting. So it went 1.MCE enabled, 2. SVID Behavior Best...
  7. Replies
    63
    Views
    19,058

    I have the Apex, and I found that my LLC setting...

    I have the Apex, and I found that my LLC setting of 5 seems to wildly overshoot now, I am set at 4.8ghz 1.24v across the board, was seeing max of 1.28v rarely at first load, but now its hitting into...
  8. Alright so now I've installed a EK heatsink and...

    Alright so now I've installed a EK heatsink and placed a Noctua NF8 Redux fan on top of it, it now struggles to get to 50c. However the frame time issue is still present, but seemingly better.
    ...
  9. Secure erase did not solve the issue. I played...

    Secure erase did not solve the issue. I played Skyrim Special edition and the frametimes where okayish, spikes to the 30s and 40s, but still spikes where the 850 had none.

    Seems to me it's an...
  10. Using Afterburner for frame times. I have...

    Using Afterburner for frame times. I have disabled all power saving not related to CPU speedstep, including LPM, ASPM, USB suspend, but my woes were confirmed when my 850 drive did mot have the same...
  11. I seem to have not posted the above post earlier...

    I seem to have not posted the above post earlier as I was at work. Anyhow apologies if double post is frowned on.

    I've just tested the frame times again with new cooling solution as above and new...
  12. I was monitoring both sensors thru HWinfo, one...

    I was monitoring both sensors thru HWinfo, one never went higher than 40ish the other was in the 60s, but I didn't actually test a full saturated load. I did this and after a while I got the second...
  13. I was monitoring both sensors thru HWinfo, one...

    I was monitoring both sensors thru HWinfo, one never went higher than 40ish the other was in the 60s, but I didn't actually test a full saturated load. I did this and after a while I got the second...
  14. The drive would still be under warranty, and my...

    The drive would still be under warranty, and my primary install is on a transferred system (I let windows 10 do it's jazz after installing, removed all the old leftover stuff myself and reinstalled...
  15. Maximus X Apex NVME causing frame time issues (Sam 960 Evo)

    Hi folks,

    I've been experiencing stuttering issues since I got my 8700k and Apex board, but only on games on my NVME Samsung 960 Evo drive (500gb). I have it installed on slot 0 of the DIMM.2...
  16. Well *seem* to have solved by by reactivating...

    Well *seem* to have solved by by reactivating MCE. Read another forum that mentioned to leave this on. But why would this take precedence over actual TDP settings? Is this actually required for that...
  17. Some advice needed on M10 Apex Package Limit Throttle BIOS 1003

    Hi all.

    Finally got my Apex board and 8700k, setting it up for the long haul (24/7 use). Came from a 7700k with MSI Xpower Titanium board, which died :( Semi used to RoG as I own a Rampage 4...
  18. Replies
    14
    Views
    3,412

    Well I think I've decided I'll replace the kraken...

    Well I think I've decided I'll replace the kraken an original H115i (non pro). Seems they are selling reasonably cheap, I might whack a couple A14 3000 on it too :)
  19. Replies
    14
    Views
    3,412

    Yeah I'm getting the feeling it's gonna block a...

    Yeah I'm getting the feeling it's gonna block a Ram slot given it seems so close. I found a video with a H115 and the had to mount sideways as well.

    Not sure if mounting upside down has any...
  20. Replies
    14
    Views
    3,412

    Maximus X Apex Kraken X62 compatibility

    Hi all,

    Looking at the board mentioned in title, can't seem to find any pics if this cooler will fit properly.

    Cheers.
  21. Replies
    6
    Views
    2,985

    Itll be nice if the 5.1ghz Xeon works out to be...

    Itll be nice if the 5.1ghz Xeon works out to be true. Then its just getting a hold of it.... It would also be nice if they skip Broadwell-E in favor of Skylake-E.....
  22. Replies
    6
    Views
    2,985

    I'm running 3 Intel 520 SSDs so all good there....

    I'm running 3 Intel 520 SSDs so all good there. Basically the reason why I say I need 30% more IPC is because the rendering pipeline of DirectX9 has become the significant bottleneck for this one...
  23. Replies
    329
    Views
    96,204

    I will absolutely vouch for the NZXT Kraken x61s....

    I will absolutely vouch for the NZXT Kraken x61s. Awesome, awesome cooler. I used 2 different Thermaltake solutions before on my 3960x and both couldn't keep it under control. I put one of these on...
  24. Replies
    6
    Views
    2,985

    Need 30% more IPC i think

    Hi folks,

    Recently I've been considering building a new rig based on the 6700k, as I need more IPC due to my no-expenses-spared, heavily modified Skyrim needing a little bit more on the CPU side...
  25. Replies
    5
    Views
    5,118

    The main thread sticky with the dl link. its...

    The main thread sticky with the dl link. its broken.
Results 1 to 25 of 25