Search:

Since it's happening with both the iGPU and the 3070ti, it could be the cable, monitor setting, windows setting and as lalantha mentioned HDR mode.

Do you have Hardware-accelerated GPU scheduling...

Hi oliva33

It looks like only the higher end motherboards made the list, the Z97-A/USB 3.1 probably made it by the skin of its teeth.

Being Z97 is seven generations old, I wouldn't expect...

Hi Minimos,

I'm not sure of the exact model of your ROG Strix Z270 motherboard but, have you tried clearing the cmos with the clear cmos button or cmos jumper?

Please list your pc specs.

Hi Siivet,

Try running the internet troubleshooter and see if it finds anything.

93125

Hi guys,

I have the ROG Falchion NX, I think it's an awesome little keyboard.

You can assign the touch panel with F1, F2 keys etc.

No, the switches are not hot swappable.

You could try uninstalling your ROG Claymore II from Device Manager, restart your pc and try the Fn key.

Thank you

Maybe there is an easy fix.

Since it happened after an update, try uninstalling Armoury Crate with the uninstall tool from the ASUS Support Center.

Select your operating system...

Can you be a little more specific, do you want to replace the switch for the Fn key?

Comparing the U.K. layout to the U.S. layout, I do see they are different.

U.K Layout
93096
U.S. Layout...

Hi vcore

Have you tried both a Displayport 1.2 cable and HDMI 2.0 cable?

Have you set the refresh rate to 144Hz in the Nvidia Control Panel? You could try setting it to 120Hz.

Unless you use...

Hi dr.alwi

Are you able to change the RGB brightness on your ROG Claymore II by holding down the Fn key and pressing the up and down arrow keys?

This key cap set is compatible with the ROG...

Hi Gaia

Welcome to the ROG forum.

After enabling CSM, did you press the F10 key to save the setting?

The bios screen is usually a sign of instability, since you're not overclocking, I...

Well, apparently it was normal procedure, I wouldn't stress over it if everything is working ok.

If you have random shutdowns, then it would be time to investigate.

Hi Ipiotrowski211,

During the windows 10 install, it's not uncommon for a couple reboots.

If all is working well now, I wouldn't be too concerned.

Just so you know, you can upgrade to...

Hello,

I'm using the ROG Delta S Animate and haven't experienced lower mic volume.

There have been a few updates for Armoury Crate.

Are your mics working any better?

I've got this one too.

The KMODE EXCEPTION NOT HANDLED can be a memory related error but can also be a corrupted/outdated driver.

You could try SOC voltage at 1.15v - 1.20v Maximum. If you...

Ok so,

Looking at the specs of your psu, it says it has three 6-pin pcie cables and one 6+2-pin pcie cables, which = one 8-pin pcie power cable.

I'll post it to be sure.
...

Hi gman8336,

Welcome to the ROG forum.

Use the Armoury Crate uninstall tool from the ASUS Support Center.

Select your operating system then click "Show all", it's the third download.
...

Hi DoomerDGR8

Is everything working ok other than the vga light being on?

Have you updated to the latest bios for your motherboard?

Are you using two separate pci-e cables?

Try with...

Sure,

You get the Armoury Crate uninstall tool from the ASUS Support Center.

Select your operating system then click Show all, it's the third download.
...

I have an RGB suggestion.

I really like how you did the ROG Spatha X side buttons with thin sleek lines.

93014

I wonder if you could get the same effect with the ROG Chakram mice where the...

Hi Hoverboy,

Welcome to the ROG forum.

Unfortunately, the device page error will require a windows reinstall.

S4+S5 is enabled,

Disable ErP Ready, it should then do a single boot.

With ErP Ready disabled, your peripherals will stay lit when your pc shuts down.

It's personal preference, I let mine...

Hi deadrick5

Welcome to the ROG forum.

I get a double boot when I have "ErP Ready" enabled in the bios.

Hi dmclone

Welcome to the ROG forum.

Two easy things I'd try is..

1) With your pc powered off, press and hold the clear cmos button for 3 seconds, then try booting.

2) Update the bios...

Here is a video that may help get your ram detected.


https://www.youtube.com/watch?v=1gMsiSXmkHE