Search:

Type: Posts; User: Yarjard

Page 1 of 2 1 2

Search: Search took 0.01 seconds.

  1. Replies
    1
    Views
    381

    The Tj.MAX for AVX512

    Hello guys,

    CPU: 7940X delided
    MB: Rampage VI Extreme - BIOS 1301
    OC 4.5G@1.15v manual mode , AVX offset 2 , AVX512 offset 5

    Base on Intel Ark, the Tj.max is 102 degree
    When I using AIDA64...
  2. Yep, that's the only way I can take. If your...

    Yep, that's the only way I can take.
    If your desire voltage is lower than default voltage,the adaptive mode is the same as offset mode.
  3. No, it won't apply because the default voltage...

    No, it won't apply because the default voltage for ratio 44/45 is more than 1.2v, you can see #1 and#22
  4. Thanks Nate! tha's help a lot! So Skylake-x's...

    Thanks Nate! tha's help a lot!
    So Skylake-x's Core VID = the real cpu core voltage

    And I also find some thread that can explan why Additional Turbo Mode CPU Core Voltage never apply....
  5. Actually I already posted #18...

    Actually I already posted #18 haha..

    You can see the CPU Core Voltage reported by AI Suite3 is the same as Core#0 VID in HWiNFO(Max Value,AI Suite refresh a little bit slow than HWiNFO)
    73728
  6. Still the Same. I think it's a misreading...

    Still the Same.
    I think it's a misreading value.
    The Cpu Core Voltage reported by AI Suite3 is the same as Core VID.
  7. Still showing 1v at CPUZ 1.8.4 and HWMonitor ...

    Still showing 1v at CPUZ 1.8.4 and HWMonitor
    VID will stay at the highest value
  8. That's too bad....noting changed Clear CMOS-> No...

    That's too bad....noting changed
    Clear CMOS-> No effect
    Load Default->No effect
    Switch to BIOS2( Version 1004)->No effect
    Clear CMOS for BIOS2->No effect
    Load Default for BIOS2-> No effect
    No...
  9. I have the impression that the VID will stay at...

    I have the impression that the VID will stay at the highest value like what I have posted.
    I will confirm that too after work.
  10. Okay...I'll will try to clear the CMOS to see...

    Okay...I'll will try to clear the CMOS to see what changes,and maybe switch to bios2 (Bios version 1102)
  11. Load default setting and test result 73703

    Load default setting and test result

    73703
  12. 4.4G@0.944v? That might be something wrong......

    4.4G@0.944v? That might be something wrong...
    73701
  13. CPUZ 1.8.4 read CPU Voltage same as HWMonitor...

    CPUZ 1.8.4 read CPU Voltage same as HWMonitor
    73699

    I think Core VID= real core voltage in my case.
    The Core Voltage report from HWMonitor might be wrong...
  14. Okay...I think the Additional Turbo Mode CPU Core...

    Okay...I think the Additional Turbo Mode CPU Core Voltage doesn't work
    73691

    If I set Additional Turbo Mode CPU Core Voltage to 1.2v and offset -0.05v,will get this result
    73692

    And if I set...
  15. The Vcore still stay at 1v maximum 73680

    The Vcore still stay at 1v maximum
    73680
  16. But 4.4/4.5G @ 1v is impossible... I have had...

    But 4.4/4.5G @ 1v is impossible...
    I have had try 4.5G@1.1v use manual mode, but I can't even enter windows,4.5G@1.15v is the lowest voltage can work stably.
  17. That's weird,HWMonitor showing my Vcore is 1v......

    That's weird,HWMonitor showing my Vcore is 1v...
    73676

    And if I set cpu voltage at 1.15v in manual mode
    73677
    The Core VID will be the same as Cpu Voltage
    73678

    That's the reason why I...
  18. Oh,I think I misunderstood what you said. Here...

    Oh,I think I misunderstood what you said.

    Here is a part of my current setting's shot
    73673
    I set all of my core's Additional Turbo Mode CPU Core Voltage at 1.15v
    As far as I know, this should...
  19. Unfortunately, it seems X299's Bios Setting is...

    Unfortunately, it seems X299's Bios Setting is different from z270...
    73672
    And "Try syncing the voltage to 1.15v" means use the Manual mode?
  20. But Just like you said, the offset affects both...

    But Just like you said, the offset affects both idle and turbo voltage.
    If I reduce the offset value(-0.078->-0.05),the load voltage like core 0 will raise to 1.2v, I think is too high for 4.4G
    And...
  21. I can't find what you said in Rampage VI...

    I can't find what you said in Rampage VI Extreme's BIOS(IA AC Load Line - .01 and IA DC Load Line - .01)
    I think because Skylake-X Integrates some of the features of FIVR,no matter which level I set...
  22. Thanks for reply! But my LLC is auto, which Level...

    Thanks for reply! But my LLC is auto, which Level should I set ?
  23. how to increase idle voltage at adaptive mode?

    Hello guys,

    CPU: 7940X
    MB: Rampage VI Extreme - BIOS 1301
    RAM: G.Skill Trident Z F4-3200C16-8GTZR - 8G*4

    I've had a stable overclock on my 7940X 4.5G @ 1.15v , but I want it reduce...
  24. Replies
    10
    Views
    4,491

    Okay...so"boot-> pass post -> shutdown...

    Okay...so"boot-> pass post -> shutdown suddenly(like power loss)-> reboot -> pass post->login windows" is normal for x299 system?
    I though pass post means "everything is ok" so it shouldn't suddenly...
  25. Hi, it seems normal on X299 system, my Rampage VI...

    Hi, it seems normal on X299 system, my Rampage VI Extreme also shown (32G(31.7G) available).
    I have tested install 8G、16、24G、32G on my X299 system, all of them reserved 300mb
    And you can find...
Results 1 to 25 of 27
Page 1 of 2 1 2