Search:

Type: Posts; User: Silent Scone@ROG

Page 1 of 20 1 2 3 4

Search: Search took 0.03 seconds.

  1. Hello, 1.5v is normal for this platform and is...

    Hello,

    1.5v is normal for this platform and is intrinsically related to how Zen handles idle voltage and parks cores. Many Intel users fall trap to these levels when crossing over to team red.
    ...
  2. Replies
    3
    Views
    114

    Hello, Are you using Prime? Prime95 AVX...

    Hello,

    Are you using Prime?

    Prime95 AVX workloads have a 51X ratio cap irrespective of user-applied settings.
  3. Replies
    2
    Views
    162

    Need more info, please. Memory kit PN? 64GB...

    Need more info, please. Memory kit PN?

    64GB may need more VCCSA voltage. Try 1.3 1.35v.
  4. Aside from attempting to use the assistant, best...

    Aside from attempting to use the assistant, best to plug in each of one's peripherals/USB Devices until the error is visible within Device Manager to isolate the device.
  5. Hello, 50C is fine and well within operating...

    Hello,

    50C is fine and well within operating limits. Mileage will vary depending on ambients
  6. Hello, This has already been answered for you....

    Hello,

    This has already been answered for you. PBO will operate within voltage, temperature, and current limits. Therefore upgrading your cooling capacity will aid in maintaining a higher peak...
  7. Replies
    2
    Views
    121

    Hello, Try the following. Activate XMP Profile...

    Hello,

    Try the following. Activate XMP Profile 1 and enter the below manually

    VDD 1.3v

    VDDQ 1.35v

    TXVDDQ 1.3v
  8. Hello, Can you confirm if this happens with...

    Hello,

    Can you confirm if this happens with the system at Optimised Defaults in the UEFI (no XMP or any overclocking).
  9. 1) Yes, the GPU will revert to 8x lane speed. ...

    1) Yes, the GPU will revert to 8x lane speed.

    2) Yes, PCIE 4 & SATA modes are supported

    Anything pertaining to slot configuration and lane speed should be available in the manual ;)

    I...
  10. But not together, right? Memory sold as a kit...

    But not together, right?

    Memory sold as a kit is binned in the density they are sold in. As soon as you combine them, you eat into the guardband put in place by the memory vendor designed to...
  11. Lesson here, read the manual if unsure ;)

    Lesson here, read the manual if unsure ;)
  12. Hello, Try the following: VDD 1.2v VDDQ...

    Hello,

    Try the following:

    VDD 1.2v

    VDDQ 1.2v

    TXVDDQ 1.2v
  13. Joining the party with my personal rig. Only have...

    Joining the party with my personal rig. Only have Micron 4800C38 at the moment (5200 C32)

    3x 54c 5x 53c 1x 52c 1.37v 12900KF - Apex

    Not the best silicon, but as always it is what it is.
    ...
  14. Replies
    13
    Views
    208

    Hello, The F series CPU is a locked CPU. The...

    Hello,

    The F series CPU is a locked CPU. The only way to overclock them is to use BCLK.
  15. If people are using Channel B1 and B2 for 2x DIMM...

    If people are using Channel B1 and B2 for 2x DIMM configuration then you're only using a single channel, which is easier on the IMC and memory.

    Use A2 and B2 as per the manual.
  16. Replies
    19
    Views
    1,002

    Hello, I personally managed to pick up a set in...

    Hello, I personally managed to pick up a set in the UK of Kingston Fury 4800C38. They were actually in stock for quite a few days but now sold out (around 30 kits).

    Unfortunately for any...
  17. Hello, Try increasing VDD and VDDQ to 1.25v

    Hello,

    Try increasing VDD and VDDQ to 1.25v
  18. Replies
    4
    Views
    253

    Hello, Have you updated to the latest UEFI?...

    Hello,

    Have you updated to the latest UEFI? There are some known compatibility issues on the release build.
  19. Hello, Yes, this shouldn't be an issue.

    Hello,


    Yes, this shouldn't be an issue.
  20. Hello, Update to the latest UEFI as...

    Hello,

    Update to the latest UEFI as instructed. However, that is a two DIMM memory kit. If needing to ask these questions, one should refrain from mixing memory kits.
    ...
  21. Hello, Can you confirm if this issue occurs...

    Hello,

    Can you confirm if this issue occurs when the UEFI is at complete default settings? This includes no XMP or overclocking of any kind. Rule 101 of diagnostics is to remove any culprit of...
  22. Hello, If running a GEN 5.0 NVME you must use...

    Hello,

    If running a GEN 5.0 NVME you must use M.2_1 as per the MB manual. This is however an 8x/4x configuration.
  23. Replies
    4
    Views
    169

    Hi, No it should not. Only the base driver is...

    Hi,

    No it should not. Only the base driver is needed by default. Windows has these in their library.
  24. Replies
    2
    Views
    277

    Hello, all Z690 boards are daisy chain...

    Hello,

    all Z690 boards are daisy chain topology. Optimem is additional enhancements to the existing daisy chain topology to maximise signal integrity. It will aid in running more dense memory...
  25. Replies
    7
    Views
    244

    Hi Nate, For the sake of clarity, it's...

    Hi Nate,

    For the sake of clarity, it's actually current that is the prime cause of degradation, or more current being proportionate to the frequency and voltage.


    At stock operation, degrading...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4