Search:

Type: Posts; User: JoergH

Page 1 of 4 1 2 3 4

Search: Search took 0.00 seconds.

  1. What solved it in my case: 1. Disable ErP in the...

    What solved it in my case:
    1. Disable ErP in the Mainboard-Bios
    2. Turn the PC FIRST on, then the Monitor (works with ErP S4+S5 too)
  2. How much utilisation do you have on the CPU while...

    How much utilisation do you have on the CPU while playing?!?
  3. Isnt there a problem with AMD Ryzen and Windows...

    Isnt there a problem with AMD Ryzen and Windows 11? I use Intel, but i read something abount that...
  4. Replies
    3
    Views
    181

    Asus says: Only way is ErP-Ready S4+S5

    Asus says: Only way is ErP-Ready S4+S5
  5. Power Limiting on a 1000Watt PSU with 83A on the...

    Power Limiting on a 1000Watt PSU with 83A on the 12V-Rail? I dont think so...
    Today for example, i start my PC just normal - no red LEDs...
  6. Do you have VSync enabled or a Frame-Limiter?

    Do you have VSync enabled or a Frame-Limiter?
  7. Thats totaly normal for that card. So the...

    Thats totaly normal for that card.
    So the problem is not windows or a driver, because your gtx1080 would only have 7500 gpu score (i know that because my old pc has a gtx1080).
    *Did you check the...
  8. There is no need to do that, because i my case,...

    There is no need to do that, because i my case, Turn the PC off, wait 30 Seconds and turn it back on solves the problem...
    I never unplug anything to solve the problem, just PC off -> wait 30...
  9. Run TimeSpy (default settings) and post the...

    Run TimeSpy (default settings) and post the results here.
    I have two RTX3080 OC and one goes to 17895 points there (@stock) and the other to 17005 points.
    If your card is much slower there, we can...
  10. I did some testing. Today, i turned on my PC...

    I did some testing.

    Today, i turned on my PC and the 3 LEDs are blinking red...

    Ok, i boot Windows (with blinking LEDs) and start HWiNFO.

    All GPU-8Pin-Connectors (3) are showing 12,2V......
  11. Replies
    3
    Views
    181

    PC off but green LAN-LED still on...

    Hi,

    is there a way to turn the green LAN-LED off when the PC is off?

    I know i can do that with "ErP-Ready: S4+S5" in the Bios - when i set this, LAN-LED is off...
    But i dont want that...
    ...
  12. I have the same thing here. First start of the...

    I have the same thing here.
    First start of the day (not every day, but maybe one time a week), all 3 POWER-Leds blinks red.
    When the Windows-Loginscreen apears, i shutdown the PC -> wait 30 Seconds...
  13. Ok, Bug in Hwinfo & Aida… They confirmed the...

    Ok, Bug in Hwinfo & Aida…

    They confirmed the bug and they fix it in the next version…*
  14. Z590 Prime-A: VCCIO Mem OC - Volt => Readout wrong (in Software)

    Hi,

    when i look in my Bios, my VCCIO Mem OC is 1,152V (which is what i set there).
    So far, so good.

    But any software like Aida64 or HWiNFO shows me a VCCIO Mem OC of 0,576V (which is exact the...
  15. Replies
    1
    Views
    139

    Which AudioDriver for my Z590 Prime-A?

    Hi,

    which is the right Audio-Driver for my Z590-Prime-A Board?

    I find 2 threads here in the forum, but i have no idear which one is the right one and which driver i should use...

    Thanks!
  16. Thanks!

    Thanks!
  17. Replies
    8
    Views
    1,070

    You can undervolt the GPU which will reduce...

    You can undervolt the GPU which will reduce Coildwhine a lot!

    Other then that, there is no way (beside changing the card).
    I had 2 RTX 3080 Strix with massiv coilwhine and returned both od that...
  18. Prime-A Z590 - only with nvme-SSDs - do i need AHCI-Drivers?

    Hi,

    i want to run 2 nvme-SSDs on my Prime-A Z590.
    1 PCIe 4.0 4x in Slot M2_1
    1 PCIe 3.0 4x in Slot M2_3
    NO SATA-Drives!

    I disable all SATA-Ports in the Bios.

    Do i still need the...
  19. When the fans do not spin at boot (without...

    When the fans do not spin at boot (without windows runing), the card is damaged and you have to rma it
  20. Replies
    2
    Views
    307

    Thanks!

    Thanks!
  21. Disable ALL "Tweaksoftware" like MSI-AB or...

    Disable ALL "Tweaksoftware" like MSI-AB or GPU-Tweak ...

    Put load on the GPU...
    All fans start/stop spinning together => ok
    Only one fan start/stop => most like this is a hardware-problem...
    ...
  22. Replies
    2
    Views
    307

    Firmware-Update MEI & Sound

    Hi,

    short question:
    When i delete my SSDs and install Windows complete new, do i have to make the Firmware-Updates for MEI and Sound again? Or is that stored in a chip onboard (like the Bios) and...
  23. Yes. Beside that, 90 Mem-Temp is not a...

    Yes.

    Beside that, 90 Mem-Temp is not a problem, 6X-mem gets very hot... there are RTX3xxx-Models where the Mem hits nearly 100...
    But as for everything: lower is better...:)

    I would try to...
  24. I have 1860Mhz @850mV I get 1905Mhz @850mV...

    I have 1860Mhz @850mV
    I get 1905Mhz @850mV stable, but to be sure, i go to 1860Mhz...:-)
    This works everwhere - Benchmarks, Gaming - everthing...:-)
  25. I have a RTX3080 Strix... 2 of them in 2 PCs......

    I have a RTX3080 Strix... 2 of them in 2 PCs...
    GPU 70
    HotSpot 86
    Mem 82
    But both are way to loud at @Stock (and they have coil-While)

    I think everybody should undervolt his GPU (3xxx):...
Results 1 to 25 of 84
Page 1 of 4 1 2 3 4