Search:

Type: Posts; User: BigJohnny

Page 1 of 19 1 2 3 4

Search: Search took 0.02 seconds.

  1. Turn off Fast start up in the power profile.

    Turn off Fast start up in the power profile.
  2. Automatic overclocking is garbage steer clear of...

    Automatic overclocking is garbage steer clear of that mess. Start with your CPU first. Set memory to default.
    Slowly raise your multiplier until its not stable then add voltage. lather rinse...
  3. Wait for the OS to mature, its still in alpha...

    Wait for the OS to mature, its still in alpha stage and a lot of manufactures are still working on drivers for it. I installed it on a test bed and have already had multiple reinstalls needed. Im...
  4. Better is a matter of opinion based on what you...

    Better is a matter of opinion based on what you use it for.
    With that being said lighter machines seldom have as much power. My G52VY has the bawlz but its heavy due to the heatsinks needed to...
  5. An internet speed test is dependant on where the...

    An internet speed test is dependant on where the download is coming from.
    Better test is Lan speed test where you can connect to another device and check internal speed.
    Simply enter a destination...
  6. Do you have the port enabled and open lanes?...

    Do you have the port enabled and open lanes?
    Sometimes drives don't show up in bios. Check disk manager.
  7. Replies
    1
    Views
    102

    Roll back the BIOS.

    Roll back the BIOS.
  8. I believe once you register a serial number its...

    I believe once you register a serial number its done. I could be mistaken but doubt it. Ive sold cards in the past and just left an open rapport with the buyer that should they experience any issues...
  9. Depends on where you are. Android app support is...

    Depends on where you are. Android app support is supposed to be coming but not there yet. There is no support for IOS apps except for the ability to synch photos as far as I know. Everything takes...
  10. Not bad for a laptop, my desktop has passed 400...

    Not bad for a laptop, my desktop has passed 400 with it tweaked in.
    Just a run of the mill run with everything running in the background gets me around 380,000 My open CL is over 500K and encoding...
  11. Realbench was written by someone not affiliated...

    Realbench was written by someone not affiliated with ASUS. They just sponsored it. The uploads dont work any longer. Youd probably be better off running the version on HWbot. The guy that used to...
  12. This is alpha software. Not even in Beta yet. Id...

    This is alpha software. Not even in Beta yet. Id wait until its at least RC1 before worrying about things that dont work. If you are on the insider group report the bug. Thats what the group is all...
  13. Is your USB plugged into the USB slot labeled ...

    Is your USB plugged into the USB slot labeled BIOS slot and formatted fat32 with nothing else on it?
    Cant see your attachment.
  14. Its already been revamped several times over,...

    Its already been revamped several times over, bottom line is its blotware that just doesn't work correctly. Better off making the changes in the BIOS.
    GPU tweak has never worked correctly either....
  15. Replies
    22
    Views
    2,457

    ASUS makes good hardware. The firmware is often...

    ASUS makes good hardware. The firmware is often lacking and needs refinement. Ive had various boards where they put up a BIOS then pulled it but eventually it was made right. They aren't ignoring you...
  16. Replies
    24
    Views
    4,089

    I have the same cards, 2 of them and run them...

    I have the same cards, 2 of them and run them underwater. Never hit 40C so no thermal throttling or fans to worry about other than rad fans.
  17. Just my two cents. Ive never been able to reach...

    Just my two cents.
    Ive never been able to reach the full potential on anything since the 8800 series without liquid cooling. Get it cool and the performance will blow your mind. Im running a pair of...
  18. What ram were you using? I replaced the ram on my...

    What ram were you using? I replaced the ram on my G752VY with Gskill ripjaws 2400. It wont tun above that. If you were mixing sticks thats an issue too. You can add more thats exactly the same but...
  19. That almost sounds like backlight going out for...

    That almost sounds like backlight going out for what reason is another story. My PG35VQ works great at HDR1000, Gsync ultimate and 200Hz. No issues at all. Has to be model specific and my guess would...
  20. Detect HDD could be other issues. Are you...

    Detect HDD could be other issues. Are you overclocking at all? If so try default settings and see where that lands you.
    Another thing is if there is something stuck in the kernel and you have...
  21. Sounds like either that port is at its power...

    Sounds like either that port is at its power limit or faulty, Is it enabled in BIOS?
    Try something else in that port.
  22. Have you tried......biting my tongue......using...

    Have you tried......biting my tongue......using GPU tweak to set fan speeds? Im not so sure how afterburner will work on fans with a different vendor. Works find for clocks but I can attest to fan...
  23. Is the port enabled in the BIOS?

    Is the port enabled in the BIOS?
  24. Thread: 7 HDD issue

    by BigJohnny
    Replies
    1
    Views
    133

    What CPU? May not have enough lanes depending on...

    What CPU?
    May not have enough lanes depending on configuration and allocation.
  25. May be good for you but not recommended in the...

    May be good for you but not recommended in the least with hacking at an all time high. Someone can remote boot your PC if its plugged in and get in there and do whatever they want.
Results 1 to 25 of 468
Page 1 of 19 1 2 3 4