Search:

Type: Posts; User: Triton.se

Page 1 of 3 1 2 3

Search: Search took 0.00 seconds.

  1. Replies
    2
    Views
    169

    My copper bit: It's from the cooler to the side...

    My copper bit: It's from the cooler to the side with NVMe, I noticed once a bit was loose there and picked it up. Strangely I also have no working lights on the sides on my keyboard :D Once both...
  2. SO-DIMMs @ 1.35v also have SPD Table written on...

    SO-DIMMs @ 1.35v also have SPD Table written on them, making them run at different speeds, timings and volts than with XMP. So DDR4 3200MHz CL16 1.35v will work on our laptops according to the...
  3. https://downloadcenter.intel.com/download/30584/In...

    https://downloadcenter.intel.com/download/30584/Intel-Wireless-Bluetooth-for-Windows-10?wapkw=Intel%20Driver%20for%20Bluetooth

    (BT_22.60.0_64_Win10.exe)
    this download gave me all you see under...
  4. Replies
    2
    Views
    168

    It has Geforce GTX 670M, there were 680 and 690...

    It has Geforce GTX 670M, there were 680 and 690 desktop GPUs also in 2012.

    Today RTX 3090 is the highest desktop model, next are RTX 3080 (Ti/non Ti), RTX 3070 (Ti/non Ti), RTX 3060 (Ti/non Ti)...
  5. Possible to use a heatsink on NVMe in G713QR?

    I'm planning on buying a second 1TB NVMe (PCIe Gen3 x4, 3500MB/s read, 2900MB/s write) but the reviews show high temperatures even inside regular desktop PCs (60C without heatsink or fans blowing at...
  6. If you play with very high settings and high...

    If you play with very high settings and high resolution there is much less difference, but big difference using 1080p and low/medium settings.

    Here is the difference between single and dual...
  7. Your memory is in single channel mode, where dual...

    Your memory is in single channel mode, where dual channel is standard. If you only have one memory stick then it always is single channel.


    89133

    ZenTimings is a free small utility that shows...
  8. Replies
    5
    Views
    222

    If you have an external monitor hooked up, memory...

    If you have an external monitor hooked up, memory changes can cause no picture on both monitors (happened to me), in that case unplug the external monitor, boot up your laptop, plug in your external...
  9. I think it was after Armoury Crate 4.1.6 install,...

    I think it was after Armoury Crate 4.1.6 install, Shut down didn't work (pressing laptop power button), think it went to Sleep. Even if power button was set to Shut down, it performed Sleep..so I...
  10. Resizable BAR IS enabled in latest GPU-Z 2.40.0...

    Resizable BAR IS enabled in latest GPU-Z 2.40.0 :)

    88984

    Clicking "Enabled" shows more details:

    88985
  11. G713QR Resizable BAR disables after reboot

    I got VGA BIOS HOTFIX the other day from MyAsus, I opened GPU-Z and noticed for the first time Resizable BAR was Enabled, yay I thought.

    I had long before that saved a copy of original vBIOS and...
  12. RBar was ready in drivers long time ago, but not...

    RBar was ready in drivers long time ago, but not in the BIOS. I've been looking in the mobo BIOS, found nothing - now it comes in VGA BIOS, I'm fine with that :)

    EDIT // I installed the latest...
  13. Resizable BAR came with VGA BIOS HOTFIX from MyAsus today

    Asus ROG Strix G17 G713QR - RTX 3070 - Asus provided 461.73 WHQL installed (with Vulkan support)

    88893
  14. Replies
    2
    Views
    327

    You could install MSI Afterburner and lower GPU...

    You could install MSI Afterburner and lower GPU core and memory clocks, don't know if that lowers wattage tho.
  15. go ahead and able the fast startup (if you havent...

    go ahead and able the fast startup (if you havent installed ACConfig), disabling was a fix that I didn't use my self, was easier to do mode switchings yourself.

    Right now I'll just wait and see a...
  16. G713QR BIOS 319 - GPU clocks work after Sleep

    Just got BIOS 319 from MyAsus, installed it hit Fn+F11 on my keyboard to enter Sleep mode: When back to desktop after 30 seconds sleep I still had the correct GPU clocks ! Progress :)

    I did an...
  17. Armoury Crate Swedish Translation (Sleep translates to Hibernate)

    Sleep translates to Hibernate in Swedish Armoury Crate

    Sleep = Strömsparläge
    Hibernate = Viloläge

    And when in sleep mode, keyboard doesn't lit with the option on or off. I even took laptop to...
  18. ROG Keyboard Firmware Update tool - fail?

    The sides on my laptop keyboard haven't been lit for a while even tho selected in Armoury Crate (dont really need the lights at keyboard sides so I'm not worried about that)
    but the Warning message...
  19. EDIT // The reason for the successful coldboots...

    EDIT //
    The reason for the successful coldboots earlier today might have been coz I probably had Armoury Crate open until I shut down.

    So I had it open again, GPU was in Power Saving mode in...
  20. Got new updates for Armoury Crate, not sure the...

    Got new updates for Armoury Crate, not sure the HAL is new, I think I've had that version number for a long time now, but dates are both from today.

    Had 6-7 successful coldboots to correct GPU...
  21. I reverted to the oldest BIOS found on Asus...

    I reverted to the oldest BIOS found on Asus download page, BIOS 309 (EZ Flash)

    Using 309, SPD info is seen, but after a reboot or so the latest Firmware (BIOS Update) 317 is more or less forced...
  22. Oh, it lacks the Manual mode and you can't change...

    Oh, it lacks the Manual mode and you can't change CPU and GPU thingies ? :(

    Guess you'll have to wait for mods or other who has a fix.

    In ROG Strix with installed appropriate ACConfig it looks...
  23. In Armoury Crate home, select GPU tab and set GPU...

    In Armoury Crate home, select GPU tab and set GPU Power Saver to Advanced and apply changes. If you have same problems as many others, that will be a fix (GPU runs in proper way, not like in a...
  24. Found a fix that I'm happy with. Got the sliders...

    Found a fix that I'm happy with. Got the sliders and I don't have to do the mode switching anymore :)

    In Armoury Crate Manual mode, set GPU Power Saver to Advanced and apply changes.

    It does...
  25. Thx for your tip! I tested it and it worked,...

    Thx for your tip!

    I tested it and it worked, but I also tested just setting it to Advanced and applied, GPU Memory Freq changed from 6001MHz to 7001MHz.

    I have done maybe 10 coldboots now,...
Results 1 to 25 of 51
Page 1 of 3 1 2 3