Search:

Type: Posts; User: rickytuk

Page 1 of 2 1 2

Search: Search took 0.00 seconds.

  1. There are a multitude of problems with these...

    There are a multitude of problems with these motherboards, very unstable in general although some people got lucky. If you start CPU-Z as soon as your PC has booted it will probably only show Core...
  2. Hi, Your TV probably won't detect the signal...

    Hi, Your TV probably won't detect the signal until you install drivers which you can't do unless you can see the screen. Catch 22. A newer TV might be able to display the BIOS screen properly but...
  3. Replies
    21
    Views
    7,453

    Check out the motherboard manual and find out...

    Check out the motherboard manual and find out where the Cmos jumper is positioned. there will be 3 tiny pins and Jumper will sat on pins 1 & 2. Power off the computer and unplug it from the wall....
  4. Replies
    3
    Views
    2,663

    150 ohms + means it's pumping out the max volume...

    150 ohms + means it's pumping out the max volume which is used for anything above 150 impedance. It's doing what it is supposed to do. The back panel will not provide better sound quality and may...
  5. Replies
    12
    Views
    6,632

    I've had an old Nvidia based Asus board for...

    I've had an old Nvidia based Asus board for years, I've built it into about 10 different cases and it always posts first time every time. Since it's all moved to Intel I have had 2 asus board die so...
  6. Replies
    5
    Views
    2,406

    If you've overclocked your CPU it's unlikely a...

    If you've overclocked your CPU it's unlikely a flat 1.2 would be stable unless you have very very good chip but to give it a try there are a couple of things you can do. Under load your CPU is...
  7. Replies
    7
    Views
    4,094

    I'm guessing you spent extra money to buy RAM...

    I'm guessing you spent extra money to buy RAM rated for that speed so it's silly not to use it. It might have been better to ask if faster ram is worth it before purchasing but since you've already...
  8. Replies
    9
    Views
    5,055

    Don't disable CSM, instead change the settings to...

    Don't disable CSM, instead change the settings to "UEFI first" or UEFI only.

    The 2nd issue is Windows 10 itself. All the ISO files I've seen won't allow proper UEFI installation as Microsoft are...
  9. Replies
    13
    Views
    13,234

    The DAC needs to take over as your default audio...

    The DAC needs to take over as your default audio device. Do you still hear sound coming from your speakers when trying to listen through the DAC? if so just go into Hardware & Sound and set the DAC...
  10. Replies
    11
    Views
    7,293

    It's normal or a tad higher than normal. We keep...

    It's normal or a tad higher than normal. We keep hearing about performance to power improvements and I think that leads a lot of us to assume our new CPU should require less power than our old one....
  11. Replies
    22
    Views
    142,915

    I get the 40 code from a cold boot but when I...

    I get the 40 code from a cold boot but when I restart it changes to A0. This happens every time so for me it's something to do with cold booting. Either way I don't think its anything to worry about.
  12. Replies
    6
    Views
    4,536

    I think Hiong is correct but have you looked at...

    I think Hiong is correct but have you looked at the fan profile software which installs with AI suite. It provides a small icon in the corner of your screen in windows which lets you switch fan...
  13. Hi. I think all Q codes which start with a 2 mean...

    Hi. I think all Q codes which start with a 2 mean RAM initialization error. Hopefully that's just telling you the RAM needs a bit more power but it could mean your CPU just can't run RAM at that...
  14. Replies
    12
    Views
    8,563

    It's a solid board with a really good bios for...

    It's a solid board with a really good bios for tweaking. Any questions or problems you might come across you can always come here and get a quick answer to fix the problem. I'm sure MSI has a similar...
  15. Hi, I have the same sound card, it's the Champion...

    Hi, I have the same sound card, it's the Champion edition but it just means it comes with front panel, the card is identical.

    Sound is a subjective thing but having tested this very question I'd...
  16. Replies
    16
    Views
    7,917

    You'll get a lot of different opinions here but...

    You'll get a lot of different opinions here but the answer is this. Decide what you want to spend on RAM. Find the part you like and then check the Asus comparability chart to ensure it will work.
  17. Glad it helped. I'm not sure if it's a bug but...

    Glad it helped. I'm not sure if it's a bug but Asus has just released a new BIOS if you want to try it.
  18. Try this. Instead of disabling CSM set everything...

    Try this. Instead of disabling CSM set everything to UEFI only or UEFI first. You'll find those settings in the CSM menu. I'm pretty sure that will fix the problem.
  19. Replies
    4
    Views
    2,973

    It is all connected to the LLC setting. In theory...

    It is all connected to the LLC setting. In theory level 4 should not really add or take away any voltage. Try setting LLC to level 4 and the Vcore should stay very close to what you enter in the bios.
  20. I assumed it was just for flexibility. It doesn't...

    I assumed it was just for flexibility. It doesn't really matter if you're using the qconnector but if you're trying to connect everything without then it can get really tight (Some people think the q...
  21. Replies
    4
    Views
    2,973

    I don't think you can disable it but level 1 is...

    I don't think you can disable it but level 1 is basically no LLC and level 9 is max. Set it to level 1 but you will see a lot of vdroop with that setting.
  22. I don't have a fix for this but am curious about...

    I don't have a fix for this but am curious about the benefits of completely shutting off a PC. I don't think I've ever turned off my PSU. The power draw must be next to nothing, it keeps an LED on...
  23. Replies
    10
    Views
    5,909

    You need to clear the Cmos properly and the only...

    You need to clear the Cmos properly and the only way I know of doing that is moving the Cmos jumper. You'll need to check the manual to find it but there will be 3 pins on the motherboard with a...
  24. Here's an idea, I'm not sure if it will work or...

    Here's an idea, I'm not sure if it will work or not.

    If you download a windows 8.1 ISO and go ahead as if you were going to install it. It will create a boot loader partition which I think you...
  25. Replies
    3
    Views
    1,717

    Arne is dead right. Just to add a little...

    Arne is dead right. Just to add a little something as you're new to this. 2400mhz wlll be the defailt XMP value for that RAM so all you need to do is select the defaut XMP profile under the Extream...
Results 1 to 25 of 43
Page 1 of 2 1 2