Search:

Type: Posts; User: Quixote

Page 1 of 3 1 2 3

Search: Search took 0.00 seconds.

  1. Anyone think all of this sounds like something is...

    Anyone think all of this sounds like something is wrong with the VRM on the motherboard?
  2. Hello chevell65, Everything is off the board...

    Hello chevell65,

    Everything is off the board currently. It's on a box, and there are zero components attached, including no GPU, yet the loop still happens. I am not able to start it up without it...
  3. Hi Justin, A 00 q-code is sometimes related to...

    Hi Justin,

    A 00 q-code is sometimes related to bent pins, a bad CPU, etc., among other causes from what I understand. However, I'm not sure if you read my entire post above, but I'm focused on the...
  4. Hi Rob, Thanks for your response. Yes, it's...

    Hi Rob,

    Thanks for your response. Yes, it's out of the case right now, laid on the literal box it came in, with everything stripped from it, even the CPU. The cables themselves came with the...
  5. Help me diagnose this start-up problem with my system (M7F).

    Thanks beforehand for reading and any insight you might have into this problem.

    I've been dealing with an issue with my system's power up / boot process.

    Currently, when I start up my system,...
  6. And one more question: If it were to be a...

    And one more question:

    If it were to be a problem with my current PSU, any thoughts on what a good replacement PSU would be? I haven't kept up with what's good lately. I could pay for a decent...
  7. M7F Split-second 00 q-code when powered up, then no q-code, no post

    Hello.

    I had previously written that this issue was resolved, but, of course, as with a lot of 00 q-code and start-up problems, it wasn't long before it showed up again.

    I believe I might have...
  8. Hey fellas. Thanks for your responses. I...

    Hey fellas.

    Thanks for your responses.

    I thought I'd chime in and report what occurred since I last posted.

    It was a problem with the standoffs, but thankfully, I did not destroy the board....
  9. I took a look at my CPU slot on my M7F mobo, and...

    I took a look at my CPU slot on my M7F mobo, and I think I do see two darker and possibly bent pins.

    Although, when I look at those photos close up, they actually don't look bent to me. They look...
  10. Korth... So, in your opinion, is it more...

    Korth...

    So, in your opinion, is it more likely to be the CPU slot pins on the motherboard which are damaging and affecting slots A1 and A2 as opposed to my having over-tightened the standoff...
  11. DIMM slots A1 and A2 aren't working due to possible AIO cooler installation error.

    Hello, everyone.

    I've had my Maximus 7 Formula mobo for over two years now, and this is the first time I've had trouble with any of the DIMM slots.

    I had 32 gb of RAM, but I've had to go down...
  12. Replies
    2
    Views
    830

    Yes, I definitely don't want to chance it, and I...

    Yes, I definitely don't want to chance it, and I would prefer to get a new one. I'm checking the warranty info now.

    But, do you have any idea how I would verify that the pump is not working and/or...
  13. Replies
    2
    Views
    830

    H100i GTX need replacing?

    Hi.

    Well, I've had a H100i GTX for over a couple of years now and I am beginning to suspect it's slowing down and/or not working as it used to work.

    My idle temperature for my i7 4790K used to...
  14. No more support downloads (BIOS, etc.) for Maximus Formula VII?

    **Nevermind this thread. I found the support download site.**
  15. Thread: New bios 2902

    by Quixote
    Replies
    25
    Views
    14,268

    I have an MF7 with a front base and I just...

    I have an MF7 with a front base and I just installed the new BIOS. No major issues, except the new BIOS doesn't seem to address or fix the old problem that I still have with the ROG front base, which...
  16. Thread: New bios 2902

    by Quixote
    Replies
    25
    Views
    14,268

    I second that. I'm glad to see it, having just...

    I second that. I'm glad to see it, having just bought this M7F board in June of this year.
  17. Replies
    4
    Views
    4,228

    I doubt it is as good as decent independent cards...

    I doubt it is as good as decent independent cards would be, but I think it's pretty good for an on-board sound system. However, I suppose this would depend on what level of audio quality you're used...
  18. Replies
    7
    Views
    3,352

    This sounds good. I play DayZ SA. Do I just go to...

    This sounds good. I play DayZ SA. Do I just go to the server and log on? Is that it?
  19. Ah, OK. I understand. I'm sorry that's happening....

    Ah, OK. I understand. I'm sorry that's happening. I believe the same is true about the ROG Front Base Panel. The current BIOS (2801) seems to have fouled up some of the functions on it, so that, for...
  20. Did you try to get ASUS to replace the mobo?...

    Did you try to get ASUS to replace the mobo? Maybe it was a bad board.
  21. Thank you. That's good to know. I appreciate your...

    Thank you. That's good to know. I appreciate your thoughtful post. Thanks for the link.
  22. Burner27: You cannot live like that. Eventually...

    Burner27: You cannot live like that. Eventually all boards will stop getting support because of the situation you stated. Same thing can be said of Microsoft. Why do you think they stopped support...
  23. Ok. Good to know. I'll watch out for any problems...

    Ok. Good to know. I'll watch out for any problems and blame them accordingly if they occur. Thanks for the heads-up.
  24. Oops. I see you wrote "Corsair". It's actually...

    Oops. I see you wrote "Corsair". It's actually Crucial that I bought the sticks from, but it's still the same issue: the memory in a kit needs to be compatible. Anyway, I just contacted Crucial and...
  25. Thanks for letting me know. I wasn't aware that a...

    Thanks for letting me know. I wasn't aware that a new kit replacement is best. I'll keep that in mind when I get the two new sticks and see if there are any problems. If there were problems, how...
Results 1 to 25 of 73
Page 1 of 3 1 2 3