Search:

Maximus XI Code BIOS not seeing RTX 2070 Super 8GB AIO water cooled VGA card in PCIe slot 1. However, during boot up, the screen resolution is 860 X 640 or what ever is the VGA resolution of good ol...

That's right, it's normal behaviour for Z390 and possibly other chipset motherboards. It only happens from a cold start presumably because all the power has been drained from the mobo, so previous...

i was experiencing a similar issue with lag, and found it was ASUS GpuTweakII. Once I uninstalled it my system had no lag issues. There was no system event viewer log regarding GpuTweakII errors?

Have you tried using the B slots for the RAM modules? For 2 sticks I believe you should be using slots B1 and B2 [the slots are gray, not black, if i recall]. Also for 32 GB it might've been better...

I get extremely frustrated knowing that my other hardware from e.g. MSI and EVGA et. al. have recent drivers, however the same hardware from ASUS has had no driver updates this year, the only update...

Please try this site forum for the correct drivers for your Maximus XI Hero Realtek HD [UAD} Audio drivers:
https://forums.laptopvideo2go.com/topic/24364-latest-realtek-audio-codecs/page/41/
...

some motherboards have a BIOS user manual downloadable at the asus driver/user manual support website. I posted a link to one download a while ago, but I can not recall which post it was.

...

it would have been nice if you posted the link in this thread, after all you were asked by at least one or two folks to share the link. :]

I am thinking of getting this card, does anyone own one who can give some thoughts or feedback, or maybe compare with an ASUS RTX 2070. This card is the only one i know of that comes with an AIO...

that's strange that a replacement mobo gives the same error. I wonder if in fact the mobo was actually replaced? Serial number is the best way to know, i keep all serial numbers of my hardware in...

there is definitely updated AI Suit since 2015. If your mobo webpage at ASUS drivers support page does not have it you can grab it from another model. I'll link the AI suite from my ASUS Maximus XI...

it's unusual that you say performance is lower in AHCI mode over IDE, I though they both used the same bus line?

you haven't said what version of AI Suite you have installed

have you tried resetting the modem? there is a reset button that you press for some seconds with a paperclip or a toothpick. the adim and password will be reset to default, which should be written on...

It's a pitty that ASUS doesn't seal the box in plastic so that no one can take out any parts.

I think your plan build is difficult to improve on. It seems more than sufficient for what you want to use it it, and it should be good for some years to come. Your choice for fans and AIO...

As I said a non k CPU can only be OC by increasing the BLCK. The RAM can be OC either manually . Or by XMP, followed by tightening the Primary, Secondary and Tertiary timings including RAM voltage....

It's pretty difficult to remove completely. After uninstalling, you also have to followup with the registry to delete many keys that only an Advanced use should attempt. In a nutshell once you type...

when my older Maximus VIII Hero put out error 00 it also had a lit CPU LED, and i learned that the CPU an i7 7700k was dead. My retailer exchanged it for a new CPU and it fixed that problem.

A...

Please keep us updated

I believe you can only overclock a non k CPU by increasing BLCK, but you can not change multiplier. You might be able to change voltage to CPU but I am not sure, it has been a few years since I used...

@pndiode

that's a nice tool kit that should make the job of straightening bent pins easy.

My pleasure to be able to help you. Although this is a band aid approach, for it is best to actually resolve the actual problem than to suppress the service. Yes repairs are best done as an...

Just how many pins are bent? can you count them accurately? If it's only a few pins, like 2 to 5 then why not give it a go at straightening them yourself. After all, they are already bent, so really...

A permanent solution is to stop the service from starting. There's a setting in "Task Scheduler" which calls the NahimicSvc32.exe service to start on Windows startup/logon, that you can delete....