Search:

Type: Posts; User: chrismog2_2

Page 1 of 2 1 2

Search: Search took 0.00 seconds.

  1. Replies
    1
    Views
    330

    Not a bug, put some stress on your GPU (the...

    Not a bug, put some stress on your GPU (the render test button is literally right next to the bus interface readout) and it'll jump up. The slot operates in a lower bandwidth mode until it's...
  2. I think you're confusing ABT with TVB. TVB...

    I think you're confusing ABT with TVB. TVB should give you an extra bin below 70C but ABT should work up to 100C. I think there are some BIOS issues being worked out where ABT isn't kicking in...
  3. Tested it out for my board (the Strix Z590-A) and...

    Tested it out for my board (the Strix Z590-A) and it does work properly now with XMP settings + ABT set to "Enabled". There is an Auto setting on ABT now which doesn't appear to do anything.

    Were...
  4. That makes sense, thanks for the follow-up and...

    That makes sense, thanks for the follow-up and looking forward to the next revision!
  5. It is revision 3C. I've done all my updates...

    It is revision 3C. I've done all my updates using EZFlash so far.
  6. Yes, high performance, min/max processor state...

    Yes, high performance, min/max processor state 100%, and active cooling policy.
  7. I will say that the core ratio settings did work...

    I will say that the core ratio settings did work (I kept it to 5.0 GHz all core, 5.1 for 4 cores, and 5.3 for 2 cores), so thank you for that. I didn't make any other adjustments beyond what was...
  8. All I'm saying is I disabled those options as you...

    All I'm saying is I disabled those options as you recommended, and neither ABT nor MCE, nor any combination of the two, is even getting me close to the 90c threshold denoted by Asus' MCE description,...
  9. Then if you don't mind a blunt reply, I'd like...

    Then if you don't mind a blunt reply, I'd like ABT to be working as it was designed without having to fiddle with other settings, considering Intel's statement that usage of it does not void their...
  10. Bumping this. My support ticket response was...

    Bumping this. My support ticket response was that they'd refer it to L2 support but it was closed thereafter. Not exactly sure where to go from here, other than rolling back to beta again or...
  11. I tried updating to 0707 again and disabling both...

    I tried updating to 0707 again and disabling both VMax Stress and OC TVB, but I'm still capping at 4.8 GHz all core. Single cores are still boosting up to 5.3 though for applicable lightly-threaded...
  12. Yeah, I think I'll do that. I suspect now that...

    Yeah, I think I'll do that. I suspect now that it might not be enabling ABT properly on 0707. I tried the same Cinebench test with ABT off and there was no change. Rolled back to 0704 BIOS and...
  13. I'm not sure I fully understand this, but I don't...

    I'm not sure I fully understand this, but I don't have any noise cancellation software... and not sure how that would impact other processes? You're also running 10th gen and I am 11th gen. My idle...
  14. Changed it from Auto to Enabled, didn't help. I...

    Changed it from Auto to Enabled, didn't help. I also tried the "+2Boost" profile and couldn't boot into Windows for some reason. BSODs of MEMORY_MANAGEMENT followed by MACHINE_CHECK_EXCEPTION on...
  15. Strix Z590-A - BIOS 0704 to 0707 performance hit

    Hello -

    I'm noticing a performance drop since upgrading my Strix Z590-A BIOS from 0704 (beta) to 0707 with my i9-11900K. All settings the same (XMP enabled, ABT on, MCE on) as far as I can tell. ...
  16. Interesting, thanks for the follow-up. So... ...

    Interesting, thanks for the follow-up. So...

    1) the K-variants should have lower VCCSA? Just for reference I tried lowering my 11900K to 1.25v and still haven't seen any problems. SP rating on...
  17. Curious to know more about this. Mine...

    Curious to know more about this. Mine (i9-11900k, on a ROG Strix Z590-A) was showing 1.584v for CPU VCCSA in HWiNFO, and confirmed in BIOS as well, with XMP on / ABT on / MCE on / 1:1 ratio ("Gear...
  18. Replies
    4
    Views
    651

    I have the same board, and am not seeing that...

    I have the same board, and am not seeing that delay. It's possibly an older driver though (10.0.19041.1, dated 12/6/2019, for the "Realtek USB2.0 Audio" device).
  19. Replies
    24
    Views
    3,689

    They'll ask you for some basic diagnostic reports...

    They'll ask you for some basic diagnostic reports (dxdiag, msinfo32, etc.) and then make sure you've updated BIOS + chipset and such. And that the usual "supported" non-OC values are being used,...
  20. Replies
    24
    Views
    3,689

    Just wanted to put some closure to this thread, I...

    Just wanted to put some closure to this thread, I appreciate the advice / assistance but never could land on voltages or settings that 100% stabilized things during games. AMD has agreed to RMA my...
  21. Replies
    24
    Views
    3,689

    Same as always, WHEA_UNCORRECTABLE_ERROR on the...

    Same as always, WHEA_UNCORRECTABLE_ERROR on the blue screen, but the Windows system log doesn't have a chance to record it. So it goes in as an unexpected shutdown (event id 6008), dump file...
  22. Replies
    24
    Views
    3,689

    Well, after a few days of not having any issues,...

    Well, after a few days of not having any issues, got another BSOD while playing the same game, roughly 30 minutes in. No dump file (main screen froze at 0% on the BSOD dump creation; sound locked in...
  23. Replies
    24
    Views
    3,689

    This may sound silly, but just a game (Final...

    This may sound silly, but just a game (Final Fantasy XIV) and a specific dungeon (one of the newest, Matoya's Relict). Because nothing else was replicating the BSOD behavior, and I could get it to...
  24. Replies
    24
    Views
    3,689

    It's been a few days... I returned my VSOC to...

    It's been a few days... I returned my VSOC to auto on Monday, but couldn't do any gaming testing until today. System's been stable otherwise, doing basic desktop work and all that... but that has...
  25. Replies
    24
    Views
    3,689

    I found this image on an old post explaining the...

    I found this image on an old post explaining the PSS Support items:
    https://imgur.com/a/nti5lLu

    And now, strangely, after a cold boot this morning, none of my cores are hitting C6 at all. Only...
Results 1 to 25 of 34
Page 1 of 2 1 2