Search:

Type: Posts; User: mapesdhs

Page 1 of 2 1 2

Search: Search took 0.00 seconds.

  1. Poll: I figure there's two ways it could be done: a) a...

    I figure there's two ways it could be done: a) a direct clone, after which one could try a boot settings repair; b) clean install on the NVMe (so the boot partitions are correct) and then clone over...
  2. Poll: The irony is supreme. :D I just wish I could...

    The irony is supreme. :D

    I just wish I could establish for certain how to move an MBR Win7 setup from an 850 Pro onto a 960 EVO. I've followed what I've read on numerous forums, but nothing's...
  3. Poll: :D Hey, you have the right board, use your own...

    :D

    Hey, you have the right board, use your own mod, hehe. ;) Btw, I just get these things off ebay, the SM951 was only 65 UKP.

    Indeed, as it happens I'll be putting together a system shortly...
  4. Poll: Bolts, a separate update: complete success using...

    Bolts, a separate update: complete success using your mod BIOS with a P9X79-E WS, did a clean install of Win 7 Pro x64 on an SM951 256GB, CDM gives about 2.5GB/sec using Samsung driver 2.3. 8)

    Ian.
  5. Poll: That's the odd part, I've seen numerous posts...

    That's the odd part, I've seen numerous posts from people saying to leave it on.

    Note that as a quick test, doing a clean install via UEFI from a Win7 USB stick (wtih Samsung NVMe drivers...
  6. Poll: Bolts, no joy with CSM off. Confused... ...

    Bolts, no joy with CSM off. Confused...

    jimmyjam99, just keep trying different USB sticks, preferably a decent USB2.

    Ian.
  7. Poll: Hmm, I can't remember now if that's what...

    Hmm, I can't remember now if that's what happened. Maybe I should try it again.




    That's the weird part, on numerous other forums people say it should be left on, but other settings set to...
  8. Poll: The irony there is supreme, it's like someone who...

    The irony there is supreme, it's like someone who can't swim has designed the most advanced scuba gear ever. :D

    And now to a question, for you if you happen to know, but more likely others...
    ...
  9. Sorry for the delay! I was away for a while... ...

    Sorry for the delay! I was away for a while...

    Yes, I know about the splitters, and the use of PLX chips, etc., but in almost all cases at least one of the non-top-slots is still connected...
  10. I have all the original manuals, but alas none...

    I have all the original manuals, but alas none of them explain in detail how the various slots are connected, ie. there's nothing akin to this diagram I found which shows, for example, that slot 4...
  11. PCIe diagrams for P9X79 WS/Deluxe and R4E...

    I'm putting various X79 systems together, deciding on the optimal PCIe slot for an NVMe SSD (SM951, SM961, 960 Pro, etc.), so naturally a spare x16 slot with a direct connection to the CPU would be...
  12. Quick update! It was indeed the old BIOS that was...

    Quick update! It was indeed the old BIOS that was the key issue. Once updated, everything worked fine.

    Thanks for the help!!

    Ian.
  13. Ah ha! Bingo methinks! It says 1902, so indeed it...

    Ah ha! Bingo methinks! It says 1902, so indeed it seems the next logical step is to try the USB BIOS Flashback procedure. Thanks!! I shall read up again to be sure of the correct steps.


    FuryA,...
  14. Code 53 on R5E/U3.1; suggested next step?...

    Hello all! :)

    I'm trying to resolve a debug code 53 on an R5E/USB3.1. First the system specs, which atm is an open-air test setup to rule out mbd/case shorts, etc.:

    Mbd: Rampage V Extreme/USB...
  15. I smell a troll. Of course it helps; reduced...

    I smell a troll. Of course it helps; reduced vcore when it's not needed, longer CPU
    lifespan, etc. I'm sure Raja can extoll its virtues better than I'm able to though.

    Ian.
  16. The settings should be fine, at the least as a...

    The settings should be fine, at the least as a base from which to begin tweaking your own config.

    If it's of any help, I recently finished sorting out a standard R4E with a 3930K C2 @ 4.8, I can...
  17. Thanks! All working ok! Here's some resulting...

    Thanks! All working ok! Here's some resulting Futuremark fun:

    http://www.3dmark.com/3dm11/9379157
    http://www.3dmark.com/3dm11/9379231
    http://www.3dmark.com/3dm/5762794...
  18. Quick question wrt trying to get three 980s...

    Quick question wrt trying to get three 980s working on an R4E: the 6-pin EZ_PLUG socket, I've read it's for a PCIe power
    connector, but the hole shapes on the cables I have don't match those of the...
  19. Zka17 writes: > 3x graphics cards on a 1000W...

    Zka17 writes:
    > 3x graphics cards on a 1000W PSU.... hm, that could be the problem... - the amperage on the PSU rails...

    Indeed, but in the event I think it was also a messed up gfx driver that...
  20. Zka17 writes: > ... it is not about the NB, that...

    Zka17 writes:
    > ... it is not about the NB, that is built in the CPUs these days...

    That's what I was thinking. :D Alas I couldn't find a
    BSOD list that was 'updated' for X79/SB-E.

    EDIT:...
  21. Daft question, what setting in the BIOS...

    Daft question, what setting in the BIOS corresponds to the IOH (NB) voltage? I'm getting a BSOD
    code 116 in a system with three GPUs; the recommended step is to increase the IOH (NB) voltage,
    but...
  22. Thanks!! In the event though I noticed I did...

    Thanks!!

    In the event though I noticed I did still have a couple of settings on Auto (including PCH PLL);
    changing these to manual with a +0.5 bump seemed to do the trick, and I also disabled the...
  23. My question is not about the performance of the...

    My question is not about the performance of the cards (I know SLI doesn't scale linearly, I've done
    hundreds of SLI tests so far with different cards, mbds, CPUs, etc.), it's about how to get the...
  24. Extra tweaks for multi GPU with oc'd M4E?...

    I have a Maximus IV Extreme with a 2700K @ 5.0, 16GB @ 2133, currently with a single GTX 460 v2 1GB.

    I've been hunting around for info on what extra adjustments one should make (if any) when using...
  25. Yes, that's my plan; I've done it before with a...

    Yes, that's my plan; I've done it before with a friend's P8Z68-V, and my Maximus IV, but I wanted to know if
    there was anything unique to X79 systems which was worth knowing. I think I have enough...
Results 1 to 25 of 28
Page 1 of 2 1 2