Search:

Type: Posts; User: LiveOrDie

Page 1 of 20 1 2 3 4

Search: Search took 0.02 seconds.

  1. Replies
    15
    Views
    307

    The 1st model was good but the Omega overclocks...

    The 1st model was good but the Omega overclocks better and is more stable due to the improvements made.

    you can't pass 400watts due to power design Asus said the Omega is good up to 600w I would...
  2. Replies
    15
    Views
    307

    It's a 6-pin EZ_PLUG Power connector so it could...

    It's a 6-pin EZ_PLUG Power connector so it could be but it's plumes into the CPU socket.
  3. Replies
    15
    Views
    307

    I would pickup the Encore its a better board it...

    I would pickup the Encore its a better board it has better power delivery for the CPU 2x8 pin and a 4pin, I might buy one and sell my Omega off ;)
  4. Replies
    15
    Views
    307

    The omega supports 4x m.2 but the Encore supports...

    The omega supports 4x m.2 but the Encore supports full size M.2s on both slots, when the omega doesn't due to its layout, which is why they have moved around the slots.

    Still its hardly a upgrade...
  5. Replies
    15
    Views
    307

    Faster Wifi, 8x sata ports, no U.2, 4x M.2 slots,...

    Faster Wifi, 8x sata ports, no U.2, 4x M.2 slots, bigger VRM heatsink, color LED display, more RGBs, USB 3.2 and its cheaper.
  6. Replies
    15
    Views
    307

    So what are peoples thoughts on this board? Its...

    So what are peoples thoughts on this board? Its pretty much the Omega with a few changes, It looks to have a color LCD panel rather than a LED one.
  7. Replies
    15
    Views
    307

    ROG Rampage VI Extreme Encore

    ASUS today launched the Republic of Gamers (ROG) Rampage VI Extreme Encore socket LGA2066 motherboard. This board replaces the original ROG Rampage VI Extreme from the product-stack, but is...
  8. Replies
    15
    Views
    208

    I used a Thermaltake Pacific TF1 it does the job...

    I used a Thermaltake Pacific TF1 it does the job and looks good where it sits haha.

    81373
  9. Replies
    9
    Views
    175

    This issue is pretty common even on other boards...

    This issue is pretty common even on other boards using the same Wifi, you need to disable it then install the drivers then turn it back on, or like me just turned it off and left it off.
  10. Just on a side note have you tried with 1 stick...

    Just on a side note have you tried with 1 stick of Ram does it still lock up? I said to OC so you see if you can get your system stable as you never know if it will help or not if you don't try.
  11. I've had both RVI boards I was running the latest...

    I've had both RVI boards I was running the latest bios 1902 on my old board before upgrading to the omega for over a month with no issues at all running a 4.6Ghz overclock and ram on XMP 3000Mhz on a...
  12. I hardly think its bios related, if you want to...

    I hardly think its bios related, if you want to try 1503 make sure your plugging the USB stick into the right slot and make sure the bios is named correctly or it wont flash.
  13. Just having a guess on experience here also have...

    Just having a guess on experience here also have you tested to see if your CPU hits the turbo boost clocks it should? sometimes a combo of components need to be fine tuned you might have 1 lazy core...
  14. Guessing your CPU is running stock? maybe try...

    Guessing your CPU is running stock? maybe try overclocking it just saying sometime stock can be worse than a good solid OC.
  15. What lost screw? the fan was jammed out of the...

    What lost screw? the fan was jammed out of the box, ether way I contacted my local Asus RMA and there sending me a replacement fan, so pretty happy with that but still the problem shouldn't of been...
  16. Asus support really sucks ass, how hard it is to...

    Asus support really sucks ass, how hard it is to get a reply!
  17. Omega VRM fan was jammed now fan motor is burnt out

    What can I say I noticed one of the VRM fans not spinning had a closer look and it was jammed after freeing it, it now spins very slow and makes a knocking sound, looks like ill need a new fan to...
  18. Replies
    355
    Views
    14,011

    Only sand if you feel like your able to do it...

    Only sand if you feel like your able to do it without killing your CPU, for my CPU it really needed it plus i got this CPU 2nd hand so was only half what you would of paid.
  19. Replies
    355
    Views
    14,011

    Yeah so the ebay nickel plated preformed on most...

    Yeah so the ebay nickel plated preformed on most 1c hotter than the copper rockit cool IHS, the gray temps are the nickel plated rockit IHS which is just poor in performance overall, yes die is...
  20. Replies
    355
    Views
    14,011

    Temps are way better the ebay IHS is lapped when...

    Temps are way better the ebay IHS is lapped when the Rockit isn't also this IHS has better temps than the copper one I had, but take note I sanded my die down flat it really helped my higher temp...
  21. Replies
    4
    Views
    238

    0702 works fine here with Aura.

    0702 works fine here with Aura.
  22. Seems the manual says not to, why bother adding a...

    Seems the manual says not to, why bother adding a hole they could of saved 50c on the gold plating.
  23. How do you use the screw hole under the Omega VRM heatsink?

    Do you have to remove the heatsink or just don't use this screw hole?
  24. XMP should work fine if hes getting errors he...

    XMP should work fine if hes getting errors he should be testing the ram on another system!!! the only thing he needs to check if XMP is setting the correct voltages, some XMP profiles sometime do not...
  25. Replies
    5
    Views
    373

    Yeah I have a R6E and a R6EO but wont be able to...

    Yeah I have a R6E and a R6EO but wont be able to test it on that for a few weeks.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4