Search:

Type: Posts; User: chemcup

Page 1 of 2 1 2

Search: Search took 0.00 seconds.

  1. Did you start fresh with a clean installation of...

    Did you start fresh with a clean installation of Windows?
  2. Try to run the memory at default voltage 1.2v and...

    Try to run the memory at default voltage 1.2v and overclock the memory just using higher timing, see if that will disable memory training.
  3. What about the power consumption, do you see a...

    What about the power consumption, do you see a difference?
  4. That's mean then it is bad cpu. You can find...

    That's mean then it is bad cpu. You can find these codes in the motherboard manual
  5. Usually 00 means bad motherboard or CPU, it is...

    Usually 00 means bad motherboard or CPU, it is more likely bad motherboard, you need to RMA it. Mostly if the motherboard ok any memory kit will work fine, you may not be able to overclock the RAM...
  6. Zenith II Extreme the new BIOS 0902 higher power consumption than 0802

    I flashed the new BIOS version 0902 and with this BIOS and the same setting as with version 0807 PBO enable the CPU 3990x with the new BIOS will boost to a lower frequency (3.5GHz) than the 0807...
  7. All high-end motherboards from MSI Asrock...

    All high-end motherboards from MSI Asrock Gigabyte have 10 GB LAN and many USBs. If this is not enough, you can use a USB hub. The Gigabyte TRX40 Aorus Xtreme has two 10GB LANs.
  8. All the other boards from MSI , gigabyte and...

    All the other boards from MSI , gigabyte and asrock support the 3990x without any limit, ASUS Handicapped the bios for the non alpha board to force the people to buy the Alpha
  9. I have emailed ASUS for this memory problem and...

    I have emailed ASUS for this memory problem and their reply was I should buy the Alpha because this board doesn’t support CPU and memory overclocking. ASUS deliberately crippled the BIOS to force us...
  10. Try to create windows instulation USB using...

    Try to create windows instulation USB using Microsoft tool.
  11. Zenith II Extreme CPU voltage: Die Sense vs Socket Sense which is the most accurate

    in Zenith II Extreme bios there is an option to use Die Sense or Socket Sense for voltage read which is the most accurate in reading CPU voltage.
  12. Replies
    37
    Views
    4,553

    I have contacted ASUS for this memory problem...

    I have contacted ASUS for this memory problem they answered me that I should buy the Alpha because this board doesn’t support CPU and memory overclocking. I am sure 100% now that ASUS deliberately...
  13. Replies
    16
    Views
    1,681

    I have contacted ASUS for this memory problem...

    I have contacted ASUS for this memory problem they answered me that I should buy the Alpha because this board doesn’t support CPU and memory overclocking. I am now 100% sure that ASUS deliberately...
  14. Replies
    16
    Views
    1,681

    I have the 3990x and G.Skill SniperX 64GB,...

    I have the 3990x and G.Skill SniperX 64GB, DDR4-3600 (F4-3600C19Q-64GSXWB. With this motherboard (not the alpha) I can’t change the memory voltage. when I set the memory voltage higher than 1.2v ,...
  15. Replies
    37
    Views
    4,553

    Ok but why when I change the voltage of the Ram...

    Ok but why when I change the voltage of the Ram from Auto to any value this happens not when I change the memory frequency
  16. Replies
    37
    Views
    4,553

    I just bought this motherboard and the 3990x. I...

    I just bought this motherboard and the 3990x. I have a problem with it that when enable the D.O.C.P or change the ram voltage it will fail to post it post in the safe mode
    Any idea what to do to...
  17. Replies
    41
    Views
    27,552

    I have the same usb 3 problem with RIVBE the...

    I have the same usb 3 problem with RIVBE the solution which worked unplugging the computer completely from power.
  18. Replies
    143
    Views
    99,079

    this on is not AMDA00 Interface driver its ...

    this on is not AMDA00 Interface driver its NetTap6
    here is the solution for NetTap6
    https://rog.asus.com/forum/showthread.php?73868-windows-10-unknown-device-root-NetTap6

    And for AMDA00...
  19. Replies
    143
    Views
    99,079

    Any driver for the unknown device hardware id...

    Any driver for the unknown device hardware id root\NetTap6?
  20. Replies
    143
    Views
    99,079

    I am using Samsung SSD 840 EVO 500GB in external...

    I am using Samsung SSD 840 EVO 500GB in external USB3 RaidSonic Icy Box IB-253U3. The BSOD happened instantly when connecting the usb3 drive.
    I went back to the Intel Chipset 10.1.2.8 and no BSOD.
  21. Replies
    143
    Views
    99,079

    Updating to Intel_Chipset_10.1.2.9 cause bsod ...

    Updating to Intel_Chipset_10.1.2.9 cause bsod 0x00000139 ntoskrnl.exe when connecting external usb 3 drive
  22. After update to AI Suite 3 V1.01.24 the USB 3.0...

    After update to AI Suite 3 V1.01.24 the USB 3.0 Boost does not recognize any thumb usb3 drive !
  23. Replies
    8
    Views
    6,444

    How to get the post time to 2 sec? The post time...

    How to get the post time to 2 sec? The post time with my board is 18sec?
  24. Replies
    143
    Views
    99,079

    After installing Asmedia_USB3_1.16.26.1 windows...

    After installing Asmedia_USB3_1.16.26.1 windows 10 boot time increased by 20 sec from 14 sec with the 1.16.16.0 to 34 sec. any idea why??
  25. Replies
    5
    Views
    20,860

    windows 10 unknown device root\NetTap6

    I have ROG Rampage IV Black Edition . I clean installed Windows 10 there is unknown device hardware id root\NetTap6. I installed the newest Intel network drivers but it's still there.
    Any solution ?
Results 1 to 25 of 28
Page 1 of 2 1 2