Search:

Stay away from that cursed program,evga precision or msi afterburner will work better .

Look for the intel control center in the microsoft store, you will be able to set a color profile for the discrete graphic then,

Just check the previous post, you need to repaste it, Asus factory use the worse thermal paste know to human kind. They use a ungodly amount , get better quality paste and use 05mm thermal pad on the...

Depending of where you live some shop can do it for you, its not to difficult but a bit involve in the case of this model.

Ram is ok but the stick you chose dropped your ram speed at 2400mhz, you...

First check if the ram actually running in dual channel with hwinfo,i found crutial to be working the best so far with the zephyrus m.

Second you will need to re paste, asus did what i would...

Fresh install is the easiest way i found, to make everything work properly.
- Download the latest window build ,
-reset cmos,probably not needed but i always do,make sure armoury option is on in...

9600k turbo boost at 4.6, k, if it bsod at stock setting you have other issue to deal with.Is it overheating when it crash? Did you do any config in your bios or you left everything stock?

They have an ssd toolbox on their consumer site,its worth the try , if im not wrong they do use a separe tool to do the flash,its not integrated in their toolbox.

had this append before on an...

On the last couple build i had, 2 adata where doa, had 1 samsung doa, 2 wd ........ no hardware is exempt of a bad batch or manufacturing defect.

Hence why im telling him to try in another...

I see lots of post lately with adata drive issue,maybe these a compatibility issue with asus board. IF you can access another computer could you try to update the drive firmware before trying it...

I always say to buy the highest capacity you can within your budget . You can use them for everything as long a decent quality one, its great for the os since it reduce boot time . Great for video...

You can remove the optical drive cage,it would clear the space you need for your aio then. If you absolutely need a dvd drive,external usb one are dirt cheap these day.

Yes both will have a different version,there 2 physical bios chip on the board. I like to keep one untouch and only do the update on the second one.

Here you go,damn i hate that bracket lol


https://www.ebay.ca/itm/NEW-ASUS-MOTHERBOARD-M-2-BRACKET-SSD-HARD-DISK-HOLDER-13MB0TYIAM0101-D458/143328088836?hash=item215f051304:g:9zEAAOSw5QJc4alk

Page 3-19 of your motheboard user manual,

Sata is the interface of your 2.5 hd,you have a total of 6 port ,enabling your m.2, at 4x will disable port 5 and 6.

You have 2 m.2 port both support...

You will be fine, the m.2 lane are tie to the chipset. If you set it at 4x sata 5 and 5 will be disable the the 4 other port will still work. If you dont mind me asking why the usb controler card ?

The only way i found to deal with armoury crate is with a fresh window install, to stay away from ai suite ,aura and and any other asus software,they seems to conflict with each other. If any of...

Plenty of people did,you can check on pcpartpicker, i would not worry about the fitment.

There so many good case lately, my pick would be phantek eclipse 400A, NZXT H710,Fractal meshify c and lastly lian-li pc 011 dynamic.

They binned the cpu for frequency not for the memory controler, you might have lost the silicon lotery. I would write down your stock memory setting and set them manually without xmp ,you will need...

Anything under 1.4v is safe,but will generate heat.Considering your cpu is binned you should technically be able to do bellow 1.3v. Start with stock setting run bench like prime95, several run of...

Sorry for the late reply,but what kind of water block are you using?i forgot that i Had issue with my strix and a ekwb block.Maybe you are experiencing something similar ?
...

Uninstall and forget it ever existed, go install afterburner and just select third party in the option. Im dreaming of the day asus make software on the level of their hardware,aint happening...

Try the second bios, keep in mind your memory controller in on the cpu and it might not like higher frequency,or might need more voltage . When you will find an acceptable setting for your ram,turn...

It will work ,i was running my 9900k on my x code with no issue. You will most likely need higher voltage , my x code needed 1.34v to be stable at 5 all core . My maximus extreme on z390 only need...