Search:

Type: Posts; User: Phillyflyer

Page 2 of 20 1 2 3 4 5

Search: Search took 0.06 seconds; generated 45215 minute(s) ago.

  1. You are correct...A2 /B2 are primary slots..

    You are correct...A2 /B2 are primary slots..
  2. Please try the following : AI TUNER....XMP 1...

    Please try the following :
    AI TUNER....XMP 1
    DRAM FREQUENCY....4133MHZ
    DRAM VOLTAGE...1.35V...change to1.4V
    VCCIO...AUTO
    VCCSA...AUTO
    Under DRAM TIMING CONTROL...Set the following...
  3. First thing....your using (2) dual kits...

    First thing....your using (2) dual kits "mixed"....compatibility issues are most likely to occur...if you want 4x8gb suggest you get a quad kit and save yourself some time and headaches....as...
  4. Should not need that voltage @ 4133mhz

    Should not need that voltage @ 4133mhz
  5. The memory is on the Asus QVL....tested to work...

    The memory is on the Asus QVL....tested to work at it's rated speed but not guaranteed....please stick to (1) "matched dual kit only"…(sequential serial numbers)….place both modules in slots A1 and...
  6. What bios version are you running ?

    What bios version are you running ?
  7. Replies
    13
    Views
    949

    Looking the memory listed looks like you are...

    Looking the memory listed looks like you are using (2) dual kits which may be causing incompatibility / instability issues.It is not recommended to mix memory kits. You may find that you will have to...
  8. If you currently have the X Formula and happy...

    If you currently have the X Formula and happy with it..there is really no need to go to XI Formula or Code as the difference is rather minimal...IMHO
  9. Please list the brand / model # of the memory.

    Please list the brand / model # of the memory.
  10. From your post looks like you have (2) dual kits....

    From your post looks like you have (2) dual kits. Mixing 2 kits is not recommended and may cause incompatibility / instability. Manual tweaking most likely will be required with no guarantee that...
  11. Replies
    4
    Views
    1,209

    To install card...push tab down toward the...

    To install card...push tab down toward the board...install card firmly in place by pushing downward ...the tab will move upwards until a click is heard locking the card in place....To remove...
  12. Replies
    16
    Views
    5,822

    The IO shield is separate from the vrm heatsinks

    The IO shield is separate from the vrm heatsinks
  13. Sometimes just by booting with 1 stick in the...

    Sometimes just by booting with 1 stick in the board and rebooting will be part of a training process...the board sets the desired XMP settings...if you then populate the remaining slots...info is...
  14. Replies
    135
    Views
    6,332

    Set the SA @ 1.29v

    Set the SA @ 1.29v
  15. Replies
    135
    Views
    6,332

    Bump IO to 1.25 and SA 1.27

    Bump IO to 1.25 and SA 1.27
  16. Replies
    135
    Views
    6,332

    Bump IO back to 1.25v and put SA to 1.27v

    Bump IO back to 1.25v and put SA to 1.27v
  17. Replies
    135
    Views
    6,332

    With last voltage settings ??...try again..to...

    With last voltage settings ??...try again..to confirm error
  18. Replies
    135
    Views
    6,332

    Lower the IO to 1.24v and raise the SA to 1.27v

    Lower the IO to 1.24v and raise the SA to 1.27v
  19. Replies
    135
    Views
    6,332

    Please save that bios profile....once...

    Please save that bios profile....once saved...please change only the following....
    dram frequency 4266mhz
    dram timing...17-18-38-2N
    VCCIO....1.25v
    VCCSA...1.26v
    Everything else will carry over...
  20. Replies
    135
    Views
    6,332

    Congrats !!!.....Save those settings in the Asus...

    Congrats !!!.....Save those settings in the Asus bios profile 1....You can build on that by lowering the timings with 4133mhz and a better / lower latency....or try for the 4266mhz ..which I'm more...
  21. Replies
    135
    Views
    6,332

    Buy into it.....not every cpu is the...

    Buy into it.....not every cpu is the same.....8600k...8700k...8086k...9700k...9900k etc....some overclock better than others...some have stronger IMC's than others...the person that gets both in a...
  22. Replies
    135
    Views
    6,332

    No need to set Xtreme Tweaking

    No need to set Xtreme Tweaking
  23. Replies
    135
    Views
    6,332

    Set AI Tuner to Manual vs XMP....set IO to...

    Set AI Tuner to Manual vs XMP....set IO to 1.275v...set SA to 1.325v and dram voltage to 1.45v....dram capability to 130%...in dram timing select Mode 1 and set timings to 18-18-18-38-2N....I know it...
  24. Replies
    135
    Views
    6,332

    There are still some options if we can't dial...

    There are still some options if we can't dial this in....(1) go manual vs XMP....(2) test each stick individually...see if one is cause of the error...(3) try dual sticks vs quad...(4) set frequency...
  25. Replies
    135
    Views
    6,332

    If this errors...increase the SA voltage to...

    If this errors...increase the SA voltage to 1.33v...up from the previous 1.325 v
Results 26 to 50 of 500
Page 2 of 20 1 2 3 4 5