Search:

Type: Posts; User: Barefooter

Page 1 of 2 1 2

Search: Search took 0.01 seconds.

  1. So is the 1704 bios borked or is it working ok? ...

    So is the 1704 bios borked or is it working ok? Would like to know before I flash mine.
  2. If you cannot install Aura or you are getting an...

    If you cannot install Aura or you are getting an error about "Can't open AsIO.sys" and it still installs but you have no control over anything first follow these instructions from the OP:




    ...
  3. This worked for me too! Thanks much! I had...

    This worked for me too! Thanks much!

    I had Aura installed and working fine on the test bench on a Rampage VI Extreme, but had to reinstall Windows and Aura that's when I had the problem.
  4. Replies
    7
    Views
    1,468

    Hey Bluecow, I was searching around on doing this...

    Hey Bluecow, I was searching around on doing this same thing when I found this thread. I have a Rampage VI board that has six sata ports on the same controller. I want to put two hard drives in...
  5. I see there is bios version 1603 available now. ...

    I see there is bios version 1603 available now. I'm going to pick up a 4790k to replace my 4770k. So I'll be upgrading using this guide. Thanks!
  6. Replies
    39
    Views
    94,283

    I seriously doubt it will ever get fixed or even...

    I seriously doubt it will ever get fixed or even addressed!
  7. Replies
    168
    Views
    442,845

    That's normal, I would not worry about it. ...

    That's normal, I would not worry about it. Especially the mild voltage you are using.
  8. Replies
    1,062
    Views
    795,895

    I bought a three pack from the Asus eStore, but...

    I bought a three pack from the Asus eStore, but they aren't listing the now. Here's an ebay listing for them...
  9. Replies
    514
    Views
    305,575

    Sticky: I am not using adaptive. Version 2.1 works...

    I am not using adaptive.

    Version 2.1 works fine for me.
  10. Replies
    39
    Views
    94,283

    Yes I agree, it really irritates me that you...

    Yes I agree, it really irritates me that you cannot save a default power mode on start up. I use Fan Xpert 2 which is ok, but really the only thing left I'm using in AI Suite. So I'm going to buy...
  11. Replies
    1,062
    Views
    795,895

    On the Kraken X60 do you have the usb connector...

    On the Kraken X60 do you have the usb connector plugged in? That same thing happened to me when I had the usb connector off.

    The "Republic of Gamers" logo probably is not related to your problem....
  12. Replies
    514
    Views
    305,575

    Sticky: I managed to boost my score up to 86,098. That...

    I managed to boost my score up to 86,098. That puts me seventh on the list with Intel processor, 2 GPUs and Maximus boards. I think that's pretty good considering I'm running 2 7950 GPUs and all...
  13. Replies
    1,062
    Views
    795,895

    Orange is not my favorite color... but you build...

    Orange is not my favorite color... but you build is magnificent!
  14. Replies
    39
    Views
    91,497

    You can buy the optional temp sensors from ASUS...

    You can buy the optional temp sensors from ASUS they come in a three pack, here is an old link http://us.estore.asus.com/index.php?l=product_detail&p=2017
    it is not currently working, maybe they are...
  15. Replies
    1,062
    Views
    795,895

    I'd go with one 780/780ti, then you can add a...

    I'd go with one 780/780ti, then you can add a second one later down the road if you want to. If you go SLI, get the GTX 770 instead of the 680s. The GTX 770 is just an updated 680 with higher...
  16. Replies
    1,062
    Views
    795,895

    You can run 2 way SLI with this board. The...

    You can run 2 way SLI with this board. The second part I really can't answer without knowing which GPUs you are comparing.
  17. Replies
    39
    Views
    91,497

    Look at the pics above of Fan Xpert 2, see the...

    Look at the pics above of Fan Xpert 2, see the blue dots on the graph. You can drag those to adjust your curve. The yellow dot is the current temp sensor reading.
  18. Replies
    39
    Views
    91,497

    The temp probes can be used in conjuction with...

    The temp probes can be used in conjuction with the OPT fan headers to control case or rad fans. There is no way to interface them with the GPU fans. You could put a probe on the GPU and use that to...
  19. Replies
    39
    Views
    91,497

    I would not believe the reading in AI Suite, it's...

    I would not believe the reading in AI Suite, it's usually displays a much lower temp than it really is. I would use HWiNFO64, core temp or another program to double check you actual temps.
  20. Replies
    1,062
    Views
    795,895

    It should run in 3.0. However I'd recommend...

    It should run in 3.0. However I'd recommend using the top two red slots so you have x8/x8 for both cards. This board still will give you a nice gap between the top two cards. I use a side fan and...
  21. Replies
    1,062
    Views
    795,895

    The Formula board only supports 2 way SLI, you...

    The Formula board only supports 2 way SLI, you can run 3 way crossfire. You need the Extreme board to go with 3 way SLI.
  22. What Samsung drives do you have? If you have the...

    What Samsung drives do you have? If you have the EVO ones, they are not designed to work in RAID. You need the Pro versions if you want to RAID them. I learned the hard way.
  23. Replies
    514
    Views
    305,575

    Sticky: I just scored a 81,262 with Real Bench 2.0. ...

    I just scored a 81,262 with Real Bench 2.0. Seems like a decent score for just running two 7950s with a 4770k
  24. Replies
    514
    Views
    305,575

    Sticky: I'll be loading this up and running it as soon as...

    I'll be loading this up and running it as soon as I get home from work today!
  25. It's very unlikely to be your video card. I have...

    It's very unlikely to be your video card. I have a similar issure with mine 1st slot stuck at x4 native. I have two 7950 cards in crossfire. I've tried using only one card, switching cards,...
Results 1 to 25 of 36
Page 1 of 2 1 2