Search:

Great explanation I was not aware of that, Makes perfect sense.

Agreed all looks fine on your side. Maybe boot with 1 stick of ram and 1 hard drive only to start.
Hope you can figure out these boards are sensitive on first bootings after build. I had no graphics...

Hi derkatron.
You should post more info here to solve.
like What cpu
nvme in what slot and other hard drives listed.
bios
all other stuff connected like sound card etc.
power supply.
Thanks

Im going to guess your onboard gpu on the chip. maybe to many pixels for your monitor resolution ?

I agree after 3 days of my build i figured out too. to disable and forget

Sorry to hear it's the most stable strongest board I've owned. Just a lot of settings to get to know, if not useing defaults and try overclocking. can get complicated.

"'m also quite certain this isn't a driver issue, as the situation occurs PRIOR to windows load. It's either monitor, or bios. Card works perfectly fine CSM disabled on my other monitor. Oh FYI my...

I ended up fixing by doing a DDU driver uninstall and a Monitor driver uninstall. Now works and can get into bios. after reinstall of GPU and monitor.
tried with another HDMI old TV and had display...

I would try too. but cant get into Bios unless i put an old card in LoL

I have same problem with a 3060 and same board. Cant even get back into my bios to change. No matter what I do goes right to windows splash screen. very frustrating. I get no display unless I hook up...

I Believe m.2_1 and m.2_2 are for gen 11 chips only. Don't think you can use those 2 slots with a gen 10 cpu. Could that be part of the problem?

That's 100 percent better. Good job

ok thats what I thought Thanks for quick response

can they be stacked for instance 1mm + .5 mm to give 1.5mm.
or is that a bad idea.
Thanks

The only coil whine i notice is on boot up only. benching gameing or surfing web. its quiet.
really noticeable on boot for me only.

Not very helpful to the question of the post

MY MH13 10900K also goes to 5.2 on a cinebench with power mode on "performance"
But on "Balanced" power setting it only turbo's to 5.0 ghz, Ive been trying to figure this out also.

I like...

I also have a sea sonic 750 tx no coil whine here lucky :)