Search:

Type: Posts; User: thomas_yiu

Page 1 of 2 1 2

Search: Search took 0.00 seconds.

  1. Replies
    3
    Views
    616

    ueberboss, Please install chipset driver for AMD...

    ueberboss, Please install chipset driver for AMD - https://community.amd.com/external-link.jspa?url=https%3A%2F%2Fdownload.amd.com%2Fdrivers%2Famd_chipset_drivers.exe
    This will fix Destiny 2 problem
  2. Hello guys, please download 9001 special BIOS to...

    Hello guys, please download 9001 special BIOS to fix this issue, must be for ROG Strix X370-F Gaming only. Let me know how it works. http://www.mediafire.com/?334hvlli1b1if

    TY
  3. DId you try to reflash BIOS with Flashback? Did...

    DId you try to reflash BIOS with Flashback? Did you try changing the CPU Core Voltage to manual and set OC. What water cooling solution do you have?
  4. Replies
    8
    Views
    2,960

    I would start with setting up the timing...

    I would start with setting up the timing manually: 18-19-19-39-2N timing with 1.35V DRAM Voltage in BIOS and DIMM Frequency at 3866Mhz. Make sure the RGB software is not installed with the Aura sync,...
  5. Replies
    11
    Views
    4,496

    Hello Bluescreen, There are 3 methods to...

    Hello Bluescreen,

    There are 3 methods to spread the thermal paste, line method, cross method and the spread method (please see link). I recommend the spread method, because it will even...
  6. Hello FiveFinger, I recommend you to RMA the...

    Hello FiveFinger, I recommend you to RMA the monoblock/motherboard, they will swap it for you.
  7. Good new! HQ have fixed the issue. Please...

    Good new! HQ have fixed the issue. Please download Aura V1.04.29
  8. Replies
    60
    Views
    34,927

    Hi I-Siamak-I, Just a update. We have a...

    Hi I-Siamak-I,

    Just a update. We have a update firmware for this fix. When you send it in, email our RMA department to inform them to get V5.57 firmware upgrade to fix line in the middle of the...
  9. The best solution is to get ASUS GTX 1080...

    The best solution is to get ASUS GTX 1080 Founders Edition with BIOS version 86.04.17.00.01 (as indicated from picture).
  10. I have attache the GPUZ with CPUZ to indicate...

    I have attache the GPUZ with CPUZ to indicate that ASUS GTX 1080 and Maximus VIII Impact is compatible with each other
    57934

    Could you kindly please provide CPUZ shot?
  11. Finas, so sorry about your motherboard and vga...

    Finas, so sorry about your motherboard and vga not working as intended. We will provide you a picture as soon as possible.
  12. FiNAS, what power supply do you have? Minimum...

    FiNAS, what power supply do you have? Minimum power requirement is 500W with almost bare system. If you have more devices, recommend 600W.

    Reflex78, given that the other 2 cards works with 8x as...
  13. FiNAS, what power supply do you have? Minimum...

    FiNAS, what power supply do you have? Minimum power requirement is 500W with almost bare system. If you have more devices, recommend 600W
  14. You need to check on your operating system...

    You need to check on your operating system version, is possible 64 bit? Go to Start -> Right click on My Computer -> Properties ,what is your system type?
  15. I saw the A2/A0 code than reboot, which is...

    I saw the A2/A0 code than reboot, which is related to drive. Did you ever replace 950 Pro? remove M.2 and see if reboot is gone?
  16. Did you try usinr Furmark and GPuZ? Does it show...

    Did you try usinr Furmark and GPuZ? Does it show 16x?
    Did you use GPU Tweaker and set to OC mode?
    Primary Display -> PCIE?
  17. Replies
    8
    Views
    4,276

    I would set DRAM voltage to 1.39 or 1.4 and slow...

    I would set DRAM voltage to 1.39 or 1.4 and slow down timing to 16-16-16-39 or slower when bumping frequency to 2666. Heard you have to play a lot with the timing and voltage when OC memory.
    also,...
  18. Hi FiNas, Did you ever try running Furmark and...

    Hi FiNas,
    Did you ever try running Furmark and GPU Z together? GPUZ shows 16x during Furmark test?

    Edit:
    Update: Engineer report that they can no reproduce the problem. Did you make sure you...
  19. Doko15, there should be no problem with Asus...

    Doko15, there should be no problem with Asus Maximus VIII Hero with Asus GTX 1080.

    For Finas, thanks for changing the setting. It seems it doesn't work, I will check with engineers and get back to...
  20. Thanks for the pictures FiNAS. I send it to our...

    Thanks for the pictures FiNAS. I send it to our engineers.
    BTW, can you try this: under PEG Configuration -> PCIEX16 link speed -> Gen 3 and see if you get 16x?
  21. Could FINAS kindly provide us screen shot of GPUZ...

    Could FINAS kindly provide us screen shot of GPUZ and BIOS? The engineers can look at the screen shots
  22. Our engineers will look at it and get back to...

    Our engineers will look at it and get back to you with this issue.
  23. Replies
    3
    Views
    2,624

    What kind of water pump or water cooling do you...

    What kind of water pump or water cooling do you use?
  24. Replies
    13
    Views
    6,139

    also, make sure you setting the timing to...

    also, make sure you setting the timing to 16-18-18-35 @ 1.2V with 2666Mhz
  25. Replies
    3
    Views
    1,862

    Take out the CPU and put it back in again. Make...

    Take out the CPU and put it back in again. Make sure you have a heat/sink fan to the CPU. Did you have any bent pins? What Mobo?
Results 1 to 25 of 39
Page 1 of 2 1 2