Search:

Type: Posts; User: mcmarky

Page 1 of 2 1 2

Search: Search took 0.00 seconds.

  1. Ah, problem solved :) Just have to set VF curve...

    Ah, problem solved :)
    Just have to set VF curve behind 1.05V.
  2. ROG Strix 2080OC & GPU Tweak 2 no voltage increase ?

    Hello!

    I have a problem with the RTX 2080 OC and GPU Tweak II 1.9.4.4. When I set the GPU voltage higher than normal, there is no change in the monitoring, it still remains at 1.05 V highest...
  3. Replies
    7
    Views
    1,365

    Seem to me strange if fans turning at 80%... ...

    Seem to me strange if fans turning at 80%...

    Are all fans really turning?

    What about air flow general in case? Room temp?
  4. I'm happy with you, can you make a video please...

    I'm happy with you, can you make a video please how loud the card is in the Q-BIOS under load.

    My second Strix 2080 OC is nearly so grumpy and noisy as the first one. But now I put my old...
  5. Well, my PC is very silent too, using air...

    Well, my PC is very silent too, using air cooling. Of course I can hear the coil whine or buzzing noise if the card is under load. But in my opinion it is not unusual or too loud. I think every...
  6. Got a new ROG Strix RTX 2080 OC, fans are now...

    Got a new ROG Strix RTX 2080 OC, fans are now silent as expected which is really great. :)

    Enabled Q-BIOS, fan motors are hardly noticeable now, even when they begin to start. Very quite and...
  7. Thanks for your replay. I ever take those cards...

    Thanks for your replay.
    I ever take those cards at the edges and never carry them at the cooler/fan part (PC self builder since 15 years).
    I suppose my card belongs to the 5%. Because if I...
  8. That is the point, I switched already to Q-BIOS...

    That is the point, I switched already to Q-BIOS and the fans only run @ 1200rpm which is really silent if not the fan motors would exhaust that grumpy sound. I really can hear dat noise tru the...
  9. Dont get me wrong, the fan motors of my card...

    Dont get me wrong, the fan motors of my card produce gritty and grumpy noise. That's just not normal. Otherwise the reviews of the strix cards would be fake.
    My friend uses the Gigabyte RTX 2080...
  10. Replies
    604
    Views
    261,729

    Big thanks to MoKiChU :)

    Big thanks to MoKiChU :)
  11. Well, there is something strange with some ROG...

    Well, there is something strange with some ROG Strix RTX 2080 (TI) cards. Sorry, but I have to say that I returned my Strix 2080 because all three fan motors seem to work louder as usual.

    All the...
  12. Replies
    604
    Views
    261,729

    Everything installed correctly. Settings in...

    Everything installed correctly. Settings in Realtek Audio Console are saved and available after restart. But the some settings in Sonic Studio 3 are set to Default after closing the SS3 window or...
  13. Did you run Q-Fan Tuning in UEFI? Just check...

    Did you run Q-Fan Tuning in UEFI?

    Just check Argus Monitor for controlling fans. It works perfectly on my X Hero.
  14. I think you have switched to the Quiet-BIOS as I...

    I think you have switched to the Quiet-BIOS as I did on my Strix RTX2080 OC.

    It is the loop of fans ramp up and down when leaving fanstop at about GPU 55C to 60C. This range is very critical,...
  15. I think there are several threads about problems...

    I think there are several threads about problems with FanXpert4. Time delay and fan control according to settings does not work for real.

    There is Argus Monitor from Argotronic. It works 100% but...
  16. ROG Strix RTX 2080 OC, Q-BIOS fans ramp up and down at 55C til 60C

    Hello!

    I was really happy to install the new card and switched to the Quiet-BIOS. Already at the first game start I became disappointed, what kind of a hum-hum-hum-hum? I opened the case again....
  17. Replies
    182
    Views
    37,143

    Thanks, find the reason, I set both min. and max....

    Thanks, find the reason, I set both min. and max. Ring LLC Clock to 4.4GHz, so no real downclocking. Now set min. to AUTO and max. to 4.4 GHz and the Vcore reduces now again to 0.608V at idle. :)
  18. Replies
    85
    Views
    72,197

    Thanks, got it know. Changing back to UAD.

    Thanks, got it know. Changing back to UAD.
  19. Replies
    182
    Views
    37,143

    Interesting, well Clear CMOS already done…. Will...

    Interesting, well Clear CMOS already done….
    Will try something more.

    EDIT: Can you please give me your settings?
  20. Replies
    182
    Views
    37,143

    Discovered a problem with using XMP Profile and...

    Discovered a problem with using XMP Profile and CPU Offset Vcore.

    After flashing 1801 and using the same OC settings as in 1704, the CPU reduces the Vcore only to 1,18V at idle. At load usual...
  21. Replies
    85
    Views
    72,197

    Getting little bit wired. Last update, Sonic...

    Getting little bit wired. Last update, Sonic Studio and Sonic Radar come from the Windows Store and now they should be loaded separately again? Although the loaded Realtek Audio Console from Windows...
  22. Replies
    59
    Views
    15,992

    No conflict so far with MSI Afterburner and...

    No conflict so far with MSI Afterburner and Argusmonitor.
  23. Replies
    59
    Views
    15,992

    Well, the fan speeds ramp up as they ramp down,...

    Well, the fan speeds ramp up as they ramp down, also when a step down time is set. So there is a problem in AI Suite and BIOS. My friend has bought last year Gigabyte Z370 Gaming 7, and its CPU...
  24. Replies
    59
    Views
    15,992

    Well, I discovered an additional very big problem...

    Well, I discovered an additional very big problem in FanXpert4. As you can see in the attached screenshot, the "Water In" temperature which displays the GPU temp. measured by a separate sensor is...
  25. Replies
    59
    Views
    15,992

    Hello Folks, I have tested several step up and...

    Hello Folks,

    I have tested several step up and down settings, also edited the FanCalibrationData.xml and the fanprofile.xml of FanXpert4 on my X Hero. Nothing helps to use the fan speed ramp and...
Results 1 to 25 of 42
Page 1 of 2 1 2