Search:

What bios version have you flashbacked to ?

4 months later from original post and still dealing with same issue ??...I don't get it !!...I would have moved on to a quad kit long ago rather than face the aggravation of dealing with trying to...

Try flashing back to a previous bios...see if problem still exists...

Guys....sadly I must say...I moving on...I am happy to say that it was a pleasure to partake and have a voice in this forum that was able to provide some knowledge and support for those that were in...

Your issues may be more related to your overclock than with the bios...if you are using same settings as from previous bios you may need to make some minor adjustments with newer bios as what works...

Guys...I can say that I've had zero issues with bios 1105.....I can also say that I have not encountered any issue whatsoever using the bios flashback to revert back to any previous bios released...

I would return / RMA the board....most likely board is DOA.

The Q code led should light up even if CPU was at fault...would throw 00 error code....I would first check the power supply and connections to board and insure a firm connection to board....more...

It's very unlikely that the MB is the root cause of burning up the cards....not saying that it can't happen....but it is at the low end of the spectrum....these cards seem to be working initially and...

Check this link...see if is helpful for you.

https://askubuntu.com/questions/162075/my-computer-boots-to-a-black-screen-what-options-do-i-have-to-fix-it

Good point with regards to having the card securely seated within the pcie slot...poorly seated card can result in intermittent black screens as well as a short.

1.5v is on the high side of the spectrum for memory and is not needed for the 4133mhz frequency you are trying to obtain...Your instability in trying to obtain that frequency is more than likely due...

Was just throwing that out there with regards to Wattman or Adrenalin as a possible issue...Not the 1st time that software has fried a card.....Thing is...cards have been replaced a few times and the...

Bump LLC to 5 and set Dram Current Capability to 130% if u have that feature in the bios.

I'd be more inclined to look within the AMD Wattman software as your possible cause 1st...rather than the board...if you can get your hands on an NVidia GPU to test...that will narrow down where the...

The Gene is a very nice board that packs a lot of punch for its size...Suggest reading some reviews for both boards....Board available through Newegg via 3rd party seller in the UK...

Remember to screenshot your bios settings as a flash will not retain them .

Bios 602 is a stable bios...been on bios 930 since release...seems stable as well...you won't go wrong with either IMHO

Try flashing to bios 2401....if issue is still there ...bump the LLC in DIGI + VRM from auto ( which is LLC 2) to LL3

Please post the Brand / Model # of memory....there are only (3) quad 4400mhz kits that are on the Asus QVL that have been tested to work on the board....Please keep in mind that 4400mhz is not a...

Look for version 105.28....works fine for me...I will try and post a link to it

Yes...to run sli 16x you would need to switch to another platform ie: x299

Cards will run 8x

Just looked into the bios for that board....Dram Command Rate is 2N...some boards 2T... DIGI + VRM would be where Dram Current Capability would be found...not an option nor is Extreme Tweaker for...

You should have no issues with the 3866mhz quad kit...I have used it on 4 different boards .