Search:

Type: Posts; User: Silent Scone@ROG

Page 3 of 20 1 2 3 4 5 6

Search: Search took 0.02 seconds; generated 112754 minute(s) ago.

  1. Replies
    2
    Views
    407

    Hello, This might be down to memory rules,...

    Hello,

    This might be down to memory rules, cache, or Sandra may need an update (to name a few reasons). I wouldn’t get too hung up on synthetic benchmarks, but you can try AIDA64s bandwidth test...
  2. Hello,* Please state which board. Bandwidth...

    Hello,*
    Please state which board. Bandwidth sharing information should all be available in the product manual.
  3. Have you tried changing out the Display Port...

    Have you tried changing out the Display Port cable for both screens, or alternatively only running one panel to see if this helps?

    I'm aware you tried with a different memory kit, but make sure...
  4. The reported voltage will differ depending on the...

    The reported voltage will differ depending on the monitoring tool and whether VID is being reported or vcore. The VID is the voltage the CPU thinks it's receiving, Vcore is the real-time measurement....
  5. Hello, After updating, are you using an OC...

    Hello,

    After updating, are you using an OC profile that was saved in the UEFI from the previous build? If so, wipe the profile and start over.

    How are you testing memory stability?
  6. Replies
    21
    Views
    1,162

    Hello, Your 10th Generation CPU has a maximum...

    Hello,

    Your 10th Generation CPU has a maximum number of 16x PCIE lanes
  7. Replies
    21
    Views
    1,162

    Have you tried removing all expansion cards and...

    Have you tried removing all expansion cards and NVME drives from the system and checking then?

    Might want to try both reseating the CPU and GPU to ensure proper contact.
  8. Hello, SOC is sensitive to high voltages also,...

    Hello,

    SOC is sensitive to high voltages also, so you may want to tune values from 1v VSOC with DCOP and work from there. PROCODT can likely be left in Auto.

    Also try adjusting IOD VDDG and CCD...
  9. Replies
    5
    Views
    1,108

    Reviews should start to land very soon. ETA I...

    Reviews should start to land very soon. ETA I would suggest contacting support for your region.
  10. 3501 is the same build that is destined for the...

    3501 is the same build that is destined for the support pages as of this moment, but feel free to wait. There's no pressure on users to update unless they want to.
  11. Replies
    6
    Views
    812

    Use this portal:...

    Use this portal: https://rog.asus.com/motherboards/rog-maximus/rog-maximus-xiii-apex-model/helpdesk_download


    Local pages should have updated.
  12. https://www.dropbox.com/s/ktbgx3hlielou59/ROG-CROS...

    https://www.dropbox.com/s/ktbgx3hlielou59/ROG-CROSSHAIR-VIII-FORMULA-ASUS-3501.rar?dl=0
  13. The Formula BIOS is above. Flash to it if wanting...

    The Formula BIOS is above. Flash to it if wanting to try AGESA 1.2.0.2. If not, there’s no real reason to flash unless experiencing issues on the platform.
  14. Different boards, especially given the generation...

    Different boards, especially given the generation jump you've taken, have a variety of different controllers which can add time to the POST and OS hand off procedure. If these things are an issue one...
  15. Replies
    595
    Views
    189,668

    These platforms will be updated also. Expect...

    These platforms will be updated also. Expect those to be a week or two after Z370 & Z390.
  16. Replies
    595
    Views
    189,668

    https://www.sweclockers.com/forum/post/19022340 ...

    https://www.sweclockers.com/forum/post/19022340



    Local teams are now starting to receive the info.
  17. Replies
    595
    Views
    189,668

    The info I have posted above is correct and...

    The info I have posted above is correct and direct from the source (HQ). This information has only just been sent out to local.
  18. Replies
    4
    Views
    1,609

    There are one or two available on the market,...

    There are one or two available on the market, however they do come at a price. You’d need to weigh up how crucial it is given the small performance delta. One of the companies is LINKUP.
  19. Replies
    595
    Views
    189,668

    Local holiday here and in TW, so took a bit of...

    Local holiday here and in TW, so took a bit of time to get back. I've heard the timeline for Z370 and Z390 is late April to early May.
  20. Replies
    38
    Views
    8,061

    For those using the VBIOS tool and experiencing...

    For those using the VBIOS tool and experiencing the message saying there is no update available; please state which card, open GPUZ and check what VBIOS version you are currently on.
  21. Replies
    23
    Views
    4,346

    Both VBIOS need to be flashed to V3 in order for...

    Both VBIOS need to be flashed to V3 in order for REBAR to be enabled on both modes.
  22. This has nothing to do with the Lighting Service...

    This has nothing to do with the Lighting Service and is caused by the change in CPU usage and current demand. Power saving modes can exacerbate it, but you will often always get some noise when there...
  23. Replies
    27
    Views
    2,297

    Does the card complete POST and display video...

    Does the card complete POST and display video signal with REBAR disabled?

    Also, did you use the tool found on the support page?

    Clear the UEFI via the rear I/O button.*

    *...
  24. Replies
    38
    Views
    8,061

    As mentioned above, take a look at the guide over...

    As mentioned above, take a look at the guide over on Edge UP. https://edgeup.asus.com/2021/guide-how-to-enable-resizable-bar-on-your-asus-powered-gaming-pc/

    Take note of the mention of disabling...
  25. If it's not there, it will be. As above, releases...

    If it's not there, it will be. As above, releases are staggered and some of the support pages can take some time to update locally.
Results 51 to 75 of 500
Page 3 of 20 1 2 3 4 5 6