Search:

Maybe try bios 0811? Some reported issues with bios 0803.

Add me to the GSkill DDR5 not working list.

Correct. Combining identical kits from the same vendor is not recommended. Here’s the definitive guide:
...

Yea. I wasn’t sure which applications use it. That’s helpful. Thanks!!

Just saw this:

*https://www.igorslab.de/en/intel-deactivated-avx-512-on-alder-lake-but-fully-questionable-interpretation-of-efficiency-news-editorial/


Not sure of the significance here for...

Do the updates available today provide support for GSkill DDR5? Thanks.

Yea. That’s how I looked up *the vendor for that particular memory kit. Then just reviewing Shamino’s tutorial gave me the voltage parameters. Mine is still on a test bench for now.

I bumped the SAV up a little too. Sorry for the rotation. Uploaded on my iPad. Also using adaptive mode with that negative 0.7 offset to decrease the peak Vcore a bit too.

91194

91193

91192

Yep. I simply selected XMP2 for this kit and that profile filled in 1.2V for the VDD and VDDQ fields. However, I got a ton of errors in Memtest86 v9.3 pro with that. I retested the memory at default...

Maximus z690 extreme. Sorry, I forgot to list that. Kit is here:

*https://www.gskill.com/product/165/374/1635821005/F5-5600U3636C16GX2-TZ5RK*


* F5-5600U3636C16GX2-TZ5RK

The difference is negligible. Depends on resolution and what you’re doing.

*https://www.techpowerup.com/review/ddr5-memory-performance-scaling/

You can’t combine 2 kits to achieve that and expect stability. That may be the whole issue for you. Test with one kit first.

Saw you have a Maximus Extreme in an earlier post. I don’t see that particular kit on the QVL at this point. Could be validated later by Asus or Corsair. Corsair may have already validated it. Not...

CMT32GX5M2X5600C40. Now what motherboard?

And use dimms A2 and B2.

That’s the problem. You have combined memory kits. Use one or the other, not both. Â*

...

I would post your exact memory kit ID as there’s a difference between manufacturing. I’m testing mine now with VDD and VDDQ both at 1.35V as my GSkill kit is Samsung memory. Go to the Asus website...

Disregard. It was my manual OC. Had multiple errors show up. Repeat test at defaults no errors. Repeated again with XMP2 no errors.

BTW-Ramtest 1.1.0.0 yielded no errors past 1400%.

I’m getting a note in memtest86 on GSkill 5600 ddr5 cas36. Says something about errors may occur but not definite. I found the following at memtest86 website: *


*Starting from MemTest86 v6.2,...

Have the same problem with my extreme board too. Seems to work fine regardless.

Yes. Correct, guess I’m still used to Rocket Lake where 1.5 was my peak under adaptive mode. This operates at a lower voltage so I guess I was referring to “about 1.4V�. It really works well....