Search:

No problem, SOC of 1.1v should be most stable, my system runs on that without issue and PBO enabled.

This article will explain it
https://www.gamersnexus.net/guides/3491-explaining-precision-boost-overdrive-benchmarks-auto-oc

SOC Voltage set it manual (assuming you have 4 dimms@DOCP 3600 - try below)
try 1.05v, 1.1v to a max of 1.15v

Leave the Vcore on auto.

They are rather new to AMD motherboards but if you live in USA, there customer support and product support is by far the best (that I have ever dealt with). The singapore division, not so much.
I...

SOC Voltage what are you using OP ?

Check what drivers you're using. Sonic studio is often a source of issue in my travels.

See if you can roll back Windows 10 rather than reinstall. There were patches for problems with W11 and L2 cache for Ryzen, only other advice would be make sure fully patched / up to date in W11.
...

I have few of these boards, never had the issue and I've seen one other report apart from yours of a CH8 reported with this type of issue. Whatever this is Dark Hero CH8 was first multi reports of...

The bios should be able to identify when an incorrect RAM configuration is being used, ie when A2 and B2 are not used in dual ram config and advise user to place in them in the correct slots or...

Windows 10 would be my recommendation. Nothing but issues, glitches, etc with Windows 11 I have found.

Seems to be normal MS OS cycle, good OS, next one is crap, next one is good, cycle.

SOC Voltage for this RAM should be much lower, 0.95v, 1.025v, 1.05v but not exceeding 1.1v in manual setting.


I would try disabling c-states in the BIOS and retest DOCP and see if your problem...

The issue was a reversed capacitor on Z690 in manufacturing of some boards correctlly identified by Buildzoid first which result in mofset burning out. It's not the same issue as what is going on...

x570s-aero-g

Try 0.975, 1.025.1.05 to about 1.1v as the max to try.

If you have another monitor, try it first and make sure this is the problem. Also, try another HDMI cable.

Only reason to buy Asus router ~imo or join/buy pfsence hardware and never go back.

MSI has some of the best support for AMD, useful BIOS features and board quality is good.
Gigabyte has some really unique motherboards and board quality is good.
Would not use ASRock only boards...

What are using for the heatsink, if you over tighten this down, code 00 may be a side effect. Try backing off the screws 1/4 turn and see if this helps.
1900 FLCK may need to look at manual control...

My bad didn't notice the "e". Well that's dead end, sorry.

Yes it does.
https://sourceforge.net/projects/asuswrt-merlin/files/GT-AX11000/Release/

Perhaps try the alternative firmware, you can flash back if it does not help your problem.
https://www.asuswrt-merlin.net/

Are you running latest firmware on the router ?

6E is an auto band for 2.4 & 5.0 Ghz network. What is does is have one broadcast channel which automatically selects the best use of 2.4 or 5.0 Ghz,...

See if this helps
https://www.windowscentral.com/how-enter-uefi-bios-windows-10-pcs

Try running Intel driver Assistant
https://www.intel.com.au/content/www/au/en/support/detect.html

If my information is correct, kinda funny in a way, this is one of the ones that ASUS actually produce, mostly Seasonic rebrands.