Search:

Ok,

Was trying to see if we could get them to show and since they are not showing at any frequency after applying the liquid metal, I'm wondering if there was some liquid metal run off inside the...

If this doesn't work, I'm wondering if there was some LM run off inside the cpu.

Like you, I'm finding it odd just switching to LM would cause the problem.

I see you delidded your 7940x, I delidded my 7700k with thermal grizzly conductonaut and got an average of -15c in temps,...

On my motherboard, Dram Frequency shows at the top of the extreme tweaker tab in yellow.

The two sticks disappearing when setting a higher frequency tells me there is instability somewhere.

I...

Ok, you're making some progress, but still 2 sticks not showing.

Dram voltage up to 1.50v is safe and the maximum recommended by Intel.

I use Dram voltage of 1.55v with my G.Skill Trident Z's.

It's possible but normally when something like that happens the whole cpu goes.

Have you tried adjusting other voltages to help get your ram stable?

I'm not sure about your motherboard but if...

All right,

While you have it disassembled, check for any liquid metal that may have overflowed onto something it shouldn't have.

It cleans off fairly easy if you can get to it.

Hi 13oots2

From your problem described,

I'd double check the cpu socket for any misaligned pins with a magnifying glass.

When installing your cpu cooler water block, don't crank it too...