Search:

Most likely your system controller driver issue. You may want to search the forum and lookup for fellow member MoKiChU thread for all the driver you need for your system. Hope that help you.

Try to reset your motherboard bios and see if problems still persist.

You may want to submit an support ticket to Corsair to enquire them. It fastest this way.

Please switch the GPU mode on the card to Quite instead of performance. Before doing so, please make sure the power cord connecting to your system been remove.

It best for you to sent an support email to corsair and check with them. That what do in the past.

Bro MoKiChU, thank you once again.

No particular issue which Z790 sharing some common controller driver like Z690. In my case I move up from Z690 to Z790 without any issue except I need a new Windows key to activate. Hope it help.

I suspect some driver issue which play no small part in causing the issue. Please check your device driver detail again. If driver or hardware issue. Agree with you that no matter how many times you...

Try disable fast startup in windows 11. It may related.
https://www.windowscentral.com/software-apps/windows-11/how-to-enable-or-disable-fast-startup-on-windows-11

That the ending address memory of the mother bios detected. It will not reflect the total available ram the system can provide. In short never mixed ram. The performances will not be actually right....

Thank you for your contribution, MoKiChU.

In short you need it. It for better power distribution input to the card to optimize the the card itself. That will save you problems.

Thank you MoKiChU.

Pure genius. Well done.

Did you download many instance the same time? If so that the cause. Hoe much ram you have in the system?

I hate to mention this. You may hurt the motherboard by over tighten the cooler to it. Hopefully it not the case. try loosen a bit to ease the tension of the board to see it help.

1. Depend how much OC you want to achieve for 24/7. OC to the max your CPU can handle for 24/7 may subject to failure in a way.
2. No safe voltage, it all depend your overall load.
3. Follow the...

This may cause by your ram issue. Even with the exact same model and spec for the ram, two different memory kit might be different in batch production line with different part number. Therefor it...

As long your 4 stick of ram come with a single package (quad pair). 2 different set of ram even with the same model and spec will be very uncertain in performance and stability.

In my region of the hot and humid, the stock run out fast stock and very uncertain. Nothing to complain as the shortage of man power, shortage of raw material due to political reason, pandemic, over...

MoKiChU thank you.

Thank you MoKiChU :rolleyes:

( 2x different kits but same specs )....

That the caused. Even same mode with same spec may not come out from the same batch, same production line and assembly . And did not tested or certified...

BTW, is the ram inside the Asus QVL?

Try setting to XMP mode and manually set your Memory Frequency to the Speed of the specification speed of the RAM, manually set the RAM voltage according to the RAM Spec voltage and test it out. Hope...