Search:

Type: Posts; User: thorkon

Page 1 of 3 1 2 3

Search: Search took 0.00 seconds; generated 41381 minute(s) ago.

  1. Here it is! This is a gif of the lighting:...

    Here it is!

    This is a gif of the lighting:
    https://i.imgur.com/zhxuomY.mp4

    https://i.imgur.com/zhxuomY.mp4

    https://i.imgur.com/OokZgEx.png

    https://i.imgur.com/bSA7poi.png
  2. Gettting some lighting action :D heres a gif (if...

    Gettting some lighting action :D
    heres a gif (if it doesn't work, There will be a link)
    https://i.imgur.com/06VpG6I.mp4
    https://imgur.com/06VpG6I

    Static image of the lights...
  3. Back with a redo on the LEDs...

    Back with a redo on the LEDs
    https://i.imgur.com/FsQ3g3N.jpg

    I did the wiring slightly different so I didn't crowd the contacts on the leds
    https://i.imgur.com/PYPy4er.jpg

    Putting the back...
  4. Starting the LED work! TLDR: It did not go...

    Starting the LED work! TLDR: It did not go well...

    Gluing down the led strips
    https://i.imgur.com/f364GVU.jpg

    https://i.imgur.com/h1PDNIf.jpg

    https://i.imgur.com/MNPzCFs.jpg
    ...
  5. Boxes in position :D...

    Boxes in position :D
    https://i.imgur.com/WmoTlEB.jpg

    The rear bracket that will support the components. The cubes on the front are mainly for lighting, not structure support....
  6. Got most of the frame done! I had to wait a...

    Got most of the frame done! I had to wait a little bit for plastic to come in, but I"m using 3D solutech PLA and its going pretty good.

    Heres the frame pieces laying next to each other...
  7. I started the printing and got a good bit done! ...

    I started the printing and got a good bit done!

    This section alone takes about 2 days. Multiply this by 8 sections and you can see it takes awhile to do this project:...
  8. [Build Log] -ColorFalls- A RGB Wall Hanging 3D Printed Case by 8-Bit Builder

    https://i.imgur.com/lfcl449.png?2

    Hello and welcome to my newest build :)

    I've been modding for 10 years now and usually my themes are of a pixelated design. This mod is named ColorFalls...
  9. Final Photos! Gif of lights in motion here!...

    Final Photos!

    Gif of lights in motion here!
    (https://i.imgur.com/YxVzBaV.gifv)

    https://imgur.com/YxVzBaV
  10. I used 0 infill. I believe the walls are 2-3...

    I used 0 infill. I believe the walls are 2-3 layers thick. The pc weighs about 20lbs with components, not to bad actually.
  11. After doing some math I decided to get the lights...

    After doing some math I decided to get the lights their own PSU. Here it is:

    https://i.imgur.com/McXtGOc.jpg

    And after some handy dandy hiding magic...

    https://i.imgur.com/yLLXR0n.jpg

    The...
  12. I got caught up with Halloween costumes and...

    I got caught up with Halloween costumes and waiting on a few pc components for the build. This is going to be a big post to catch up!

    After doing some testing, I ran into an issue where the light...
  13. The equipment! ASUS MAXIMUS X HERO (WI-FI AC)...

    The equipment!

    ASUS MAXIMUS X HERO (WI-FI AC)

    https://i.imgur.com/G3NqTpL.jpg

    https://i.imgur.com/MXjD9Dm.jpg

    ASUS ROG GeForce GTX 1070 STRIX
  14. Just about the whole body done. These are the...

    Just about the whole body done.

    These are the MoBo mounts:
    https://i.imgur.com/LSLHcox.jpg

    https://i.imgur.com/WIjsrt1.jpg

    https://i.imgur.com/qRklSPi.jpg

    https://i.imgur.com/zgb4dHu.jpg
  15. Its not too late :D. I can alway print/add to...

    Its not too late :D. I can alway print/add to make something work. The window is really large so I can sacrifice some of that space if means getting a good door/mechanism on moving the window. I see...
  16. Going to be some rapid updates as I move into...

    Going to be some rapid updates as I move into finising printing most of pieces now. I've ran into a few issues...

    Spaghetti monster, colorized
    What happened: I was printing 3 pieces but the 3rd...
  17. Back with some new progress now that I've printed...

    Back with some new progress now that I've printed a few sections out. Having some stringing issue due to a mod I put on the printer so I've been troubleshooting it but still giiving some issues.
    ...
  18. [Build Log] -Aurora Cubes- A RGB 3D Printed Case by 8-Bit Builder

    https://i.imgur.com/lfcl449.png?2

    Hello and welcome to my newest build :)

    I've been modding for 10 years now and usually my themes are of a pixelated design. This mod is named Aurora...
  19. Large photo dump inbound!!!!! Specs: -ASUS ROG...

    Large photo dump inbound!!!!!
    Specs:
    -ASUS ROG Strix X370-I

    -ASUS GTX 1080 Turbo

    -GeIL 16gb DDR4 Super Luce RAM

    -Thermaltake SFW Toughpower 600w fully modular PSU
  20. Heres the finished video[. It shows the whole...

    Heres the finished video[. It shows the whole computer being printed. I'll be back with the photos soon!


    https://www.youtube.com/watch?v=S6MWTAKUKUk&feature=youtu.be
  21. Probably last update until the final photos and...

    Probably last update until the final photos and video! I'll have it at PAX East 2018 if anyone is going to be there by chance.
    Got the lighting done! I have it wired into the PSU so it doesn't need...
  22. Back again! I've been doing small things that...

    Back again! I've been doing small things that didnt warrant many photos (trying to learn to program, ended up having my 2 buddies help me), and rearranging computer components.
    I'm nearing...
  23. Turns out programming isn't as easy as I had...

    Turns out programming isn't as easy as I had hoped. I have a friend or two giving me a hand. In the meanwhile, I picked up 2 more sponsors! This is greatly appreciated and welcomed.

    First off is...
  24. Thanks Xeromist, agreed. Just a small update...

    Thanks Xeromist, agreed.

    Just a small update of all the lights running
    heres a link if gif embed doesnt work: https://imgur.com/VMuIZOR
    https://i.imgur.com/aLJI3Ci.gif


    Still working on...
  25. Back now that I'm done with the wiring. Oh boy,...

    Back now that I'm done with the wiring. Oh boy, was this an adventure. I've rarely done soldering/wiring and this has definitely increased my skill with it ha. There will be gifs of the lighting,...
Results 1 to 25 of 62
Page 1 of 3 1 2 3