Search:

Type: Posts; User: edrickjk

Search: Search took 0.00 seconds; generated 38426 minute(s) ago.

  1. Replies
    1
    Views
    317

    First can you send us a picture of your...

    First can you send us a picture of your setup,maybe it need some airflow improvement.Second i speak french as well so don't worry.
  2. Replies
    31
    Views
    7,474

    Was having the issue as well until i installed my...

    Was having the issue as well until i installed my water block and the ek back plate. I think the vibration is intensified with the stock back plate.

    As you can see with the picture ,the plate...
  3. You overthinking it,that game at time will crash...

    You overthinking it,that game at time will crash for no reason. There still a bug where the game will keep filling the video memory until it crash,make sure to set the limit memory option in your...
  4. Replies
    0
    Views
    226

    9900k on a maximus x code

    Been running for almost 2 month now ,board handle it with no issue and i can say i wont need to upgrade to a 390 board. Running all core at 5 ghz at 1.34 volt.

    Can be a bit toasty under avx load...
  5. Replies
    64
    Views
    6,926

    Thanks mate, was just hoping to maybe save a...

    Thanks mate, was just hoping to maybe save a couple degree overall under load and still retain the use of the 2 extra core. Just debating if i should upgrade or not from my i7 8700k.
  6. Replies
    64
    Views
    6,926

    Phillyflyer, If you don't mind can you try...

    Phillyflyer, If you don't mind can you try something. I would be curious to know the temp if we where to clock the first 6 core at 5mhz and leave the last 2 one at 3 or 4mhz.
  7. Replies
    64
    Views
    6,926

    Did you feel an improvement in some game? I don't...

    Did you feel an improvement in some game? I don't mind to delid and sand down the die if needed ,but if the gain is to minimal compared to my 8700k i might hold on until the next gen.
  8. What bios your board came with? Some retailer...

    What bios your board came with? Some retailer update the bios before shipping .
  9. No electronic run at 100% of their spec, most of...

    No electronic run at 100% of their spec, most of quality power supply these day will give between 80 and 90% efficiency. 530w is a nominal rating in a perfect use scenario , you always go with the...
  10. You asking quite a lots from such a small power...

    You asking quite a lots from such a small power supply i would never recommend anything bellow 650 on z370 platform . I would replace this then figure out any other issue. 530w at 80% efficiency...
  11. Your cpu will generate slighty more heat,since...

    Your cpu will generate slighty more heat,since the integrated graphic is within the cpu an intel uhd 630. Only other suggestion i could give you is to delid your cpu and use liquid metal,worth the...
  12. It would work, with such a board and cpu config i...

    It would work, with such a board and cpu config i would at least suggest you a 1050 ,you can get them fairly cheap ,some model like the zotac mini are nearly silent . It would give you the...
  13. you would need to get a flexible sli bridge ,but...

    you would need to get a flexible sli bridge ,but definitely you will need to fiddle with the fitment. Your card are open air or blower style?


    I have seen these before in a build cant find it...
  14. just use a riser card ,you can move your gpu...

    just use a riser card ,you can move your gpu farther apart this way.
  15. 75199 Check in your power option and disable...

    75199

    Check in your power option and disable usb suspend setting,then in your device manager make sure power management is not checked,same for your wifi and blutooth.Do you actually use edge?...
  16. So other then the fact you updated your bios did...

    So other then the fact you updated your bios did you do any other change ? Could you post the exact error code you see in the event viewer.
  17. Damn i should have bought a cooper ihs, that is...

    Damn i should have bought a cooper ihs, that is some nice temp reading.
  18. No problem, if it freeze again take look into...

    No problem, if it freeze again take look into your event viewer and post what you find,it would definitely be of a big help to figure out whats the issue. By any chance are you using some razer gear?
  19. If you have any usb hub could you try to unplug...

    If you have any usb hub could you try to unplug them and only use your kb and mouse ,then check your event viewer to see what causing the crash.
  20. Do you see your usb disconnecting, your mouse...

    Do you see your usb disconnecting, your mouse momentary loosing power for example before it crash? Had a similar issue before,taught it was the bios update,but turn out my usb hub had failed .
    ...
  21. Check your peg to make sure they are all the same...

    Check your peg to make sure they are all the same length, it can wreak havoc on a board. Had that append to me couple year back,2 board later , a new patch of white hair and me ready to burn the damn...
  22. I would try to manually set your ram without the...

    I would try to manually set your ram without the xmp loaded and go from there first .The corsair timing seems to be quite high for the frequency you get,at least if i compare to gskill.

    DId you...
  23. There lots of misinformation and misunderstanding...

    There lots of misinformation and misunderstanding when it come to m.2 drive .I would suggest you to watch this video,at 06:15 to put it simple nand should be warmer and the controller is the only...
  24. Please post your current working memory model and setting.

    Was thinking to create a post to help other user ,mainly to help people chose memory module working for them.

    1-Ram model , capacity per dimm, number of dimm ,using xmp or not and current ...
Results 1 to 24 of 24