Search:

Where did you buy the pc from and how old is it?

thanks Whoopee

yeah the rtx 2080 is 225tdp, what pins does the rtx 2080 take to run the card?

it sounds like more power issues, as the i9 9900k is 95tdp and the cpu I assume you had in the system was a i7 6700 which is 65tdp. the power brick is only 180watts to supply the whole motherboard....

do you have any pci-e power cables now?

if not then the card takes 1 x 6pin and 1 x 8pin, which is the same on the motherboard

8pin - ...

you might have to remove your cpu cooler, so buy your some spare descent thermal paste for the cpu, you might get to both slots but its just incase

to me I though their has normal ATX motherboard and looking at the picture it looks the same :s

yeah I can answer them questions also

1) yes the highest cpu is the i7 4790

2) I can't see why not your pc take a 12gb hdd, as long as your using a 64bit windows then your fine

3) if you...

still everything is working dude? yeah I had a video on resetting the CMOS but I didn't know if it would fully work some people, but I am glad that it can be useless at least lol

sounds like a fresh install of windows will do the world of good for your pc, if you still have crashes after the fresh install. do you have a spare work GPU? if so then make plug that in and try a...

your best best is to download and install a fresh windows 10, the windows could be gone and hard to fix. you will need more power bricks on, otherwise take oyt the GPU and the second power brick and...

people on this forum have said their are having trouble with the install of a ssd 500gb, you might have to go down to a 250gb ssd as the bios is old and won't be update again or in the future

btw what brands or which 500gb will installed, so other people can share that information and help others make a quick decision, and great work people :)

my guess is that the max I have seen installed as ssd is the sandisk 240gb myself and worked fine, as for the m.2 nvme, I would guess at no, as this is newer version of ssd and the bios is so old it...

you can easy find the power bricks on ebay, just search for "Asus ROG G20 Power" and you should get the 230w and 180w power bricks, but them ones are for UK and different for US

Ideal world would be to fit the founders edition card as the pushing of heat out of the rear of the card is far better then open design, which will only push it out where it can, this will cause not...

hello and welcome, the G20CB motherboard should be the same as the old G20AJ motherboard, if you remove the optic drive and the old 1TB mech hdd, then you could install 3 ssd's into the system easy,...

my best would be that size ssd would need a bios update to a old pc like the G20CB and Asus hasn't have one for ages

I always told people to stick below the 500gb ssd size, I know that a 128gb would be 100% and descent enough for a boot up drive

anything above 144mhz is classed as smooth, you need to get g-sync on and this will help with your gameplay, your system is way over kill for that game anyway

o.k well I looked at the TDP for the i7-7700k, it comes in at 91w which is a jump from the cpu you have now i7-6700 which is 65w, not sure if any one can backup and say yes or no if it will work, my...

depends on your cpu and if it can take that high speed, what speed are you looking to install and what is your cpu?

is the ssd install above the optic drive? if so I had the same issue and it toke me agaes till my ssd was picked up, yeah as Chillin said, try to see what boot order it is in, you need to set that...

the motherboard is custom to this case, here is a picture below. the ports for usb and audio are on the right and your graphics car slot is on the left, a normal motherboard would be the other way...

have you tried to open up the geforce experience and grabbing the settings that their think will be good for the gtx 750, you need to grab gpu-z and check how much of the gpu is been used. overwatch...

You got full specs of pc, and also do you have msi afterburner (software to watch for temps) also get a hold of gpu-z and check if the card isn't at 100% uasged. maybe the card is'nt get the power it...