Search:

Type: Posts; User: samsiuca

Search: Search took 0.00 seconds; generated 49984 minute(s) ago.

  1. Replies
    9
    Views
    2,889

    I get slight OCD when I see something like...

    I get slight OCD when I see something like 1TB/500GB/500GB/1TB, and it's more convenient for me (if I can just find the damn option in the BIOS...) to raid up the 2x500GB drives rather than partition...
  2. Replies
    9
    Views
    2,889

    Thankyou for your input, it is an opinion I've...

    Thankyou for your input, it is an opinion I've heard a few times already.

    That being said, raw speed increase isn't the primary incentive for me to raid up (I'm aware of the DMI 3.0 bandwidth...
  3. Replies
    9
    Views
    2,889

    Thankyou, much appreciated.

    Thankyou, much appreciated.
  4. Replies
    9
    Views
    2,889

    NVME Raid 0 on Maximus XI Hero

    Hello, I have 2x 970 Evos (accidentally bought 2 of them on a Black Friday sale), and I was wondering if the process of setting up a bootable Raid-0 array with them on a z390 Maximus XI Hero is still...
  5. Set a manual vCore voltage (maybe around 1.25v...

    Set a manual vCore voltage (maybe around 1.25v for 4.5 GHz to be safe), and see if it still crashes.

    Are you running XMP (higher than 2133MHz)? If so, turn it off and see if you still get BSODs;...
  6. I had a similar issue when I first connected the...

    I had a similar issue when I first connected the monitor to a new PC, where the monitor would not turn back on if it was turned off (had to restart the computer to get signal again).

    It was all...
  7. Replies
    3
    Views
    1,856

    HWInfo64, as well as AIDA64 (the item "North...

    HWInfo64, as well as AIDA64 (the item "North Bridge Clock").

    I should note that I am able to manually force/set the cache multiplier properly beyond the (CoreMultiplier - 3) cap via AI Suite's TPU...
  8. Replies
    3
    Views
    1,856

    Uncore ratio artificially capped?

    Motherboard: Asus Strix z270-e
    Bios Ver: 1009
    CPU: i7-7700k

    I set a core multiplier of 50x (for 5GHz) and also the "Max CPU Cache Ratio" to 50x as well. However in software the Uncore Ratio, as...
  9. Replies
    2
    Views
    1,269

    Ditto, I raised DRAM voltage to 1.37v/1.38v in...

    Ditto, I raised DRAM voltage to 1.37v/1.38v in BIOS to get 1.35v reading from HWInfo/Bios-readings as well.

    Honestly I wouldn't worry too much, DDR4 RAM sticks are safe to run with under 1.4v. In...
  10. No bent pins (as far as I can tell... unless ALL...

    No bent pins (as far as I can tell... unless ALL the pins were bent, since they are facing in the same direction, for in each section).

    No (visible) debris/bits of plastic within the socket.
    ...
  11. CPU socket clamping lever won't move into place?

    Motherboard: Strix z270e

    Whenever I try to place a CPU (i7-7700k) into the socket (with the little plastic "CPU installation tool" that comes with the motherboard), when pulling down the socket...
  12. Replies
    2
    Views
    1,304

    Check NVIDIA control panel and see if you have...

    Check NVIDIA control panel and see if you have the refresh rate there set to 144 Hz.
Results 1 to 12 of 12