Search:

Strange it shows your 2080Ti in device manager but not in the bios, losing the driver with the system automatically installing it is not normal either.

1) Are you running your your cpu and ram at...

Hi SootSlayer

Welcome to the ROG forum.

Have you tried setting a custom fan curve with GPU Tweak II ?

Hi smtx23

Welcome to the ROG forum.

Seems we need to do some more troubleshooting.

Try your 2080 Ti in the 2nd pcie_x16 slot, this should tell us a little more.

Hi ronsarlo

Welcome to the ROG forum !

7860 x 4320 = 8k resolution.

Your second answer, 7860 x 4320 for each output is correct except for DVI.

Displayport 1.2 supports 4k @60Hz
HDMI 2.0...

Hi Bluebrains

Yes it will fit.

Click the pic to make it bigger
79733

Hi Ajinta

As you say both boards will work with the 9900k but......

I would choose a Maximus 10 board for the 8th generation cpu's and choose a Maximus XI board for the 9th generation cpu's.

Hey toronto699 !

I was able to read your post and found it helpful to the thread so I made it viewable.

I hope that's ok. :)

An april driver update will enable RTX on the 10 series GTX gpu's.

If the 2080 Ti struggles with RTX on, how is any GTX gpu going to perform at playable framerates ?

April fools ?

...

Hi BrianSiano

Welcome to the ROG forum !

Power down your machine and install your corsair memory, hold the clear cmos button for 3 seconds then try booting.

How does it go?

Please list...

Looking good there Achaios !

I personally would do the overclocking manually in the bios rather than using AI Suite.

Now quickly cancel that cpu order. :)

Yes as Arne says, it's worth a try to reflash the bios, it may have got corrupted.

Let's cross our fingers and hope that's all it is.

Try Arne's other suggestions too.

Hi Achaios

You're taking the right steps in your troubleshooting, another cpu will tell you if it's the motherboard or cpu. I've seen this before and the culprit was the cpu.

You could try...

Hi BoredDude

Welcome to the ROG forum.

To update the bios without a cpu, the motherboard has to support the bios flashback feature. After looking over the specs of the ASUS Prime x370 pro, it...

Hi Shayne D

If using the 9900k you'll want a z370/z390 motherboard and unfortunately all the ROG boards listed have only one usb-c port. You may have to go x399 if you want more usb-c ports.
...

Did you get the Frames Per Second to show ?

You're welcome

Happy to help. :)

Hey Not_Enough_Rage

Bring up RTSS then watch this video.


https://www.youtube.com/watch?v=mJLN9IKYun4&t=5s

All right

The Strix 1070 is probably the minimum for 1440p at 60 FPS.

Doom 2016 plays really well with Vulkan, it runs about 100 FPS at 1440p. This is with a very old Nvidia driver.

...

LOL , no secret sauce that I'm aware of.

How are games performing at 1440p ?

There are 7 versions before 1801 so unfortunately I won't be of much help, you could start with the earliest version 0802 and see how it goes from there.
...

It's possible, you could revert to your previous bios version and test.

Hello Emjay

It's normal for your OC Profiles to be erased after a bios update.

First thing I'd check is the cpu core/cache voltage is not set to auto and you've applied 1.35v.

If I could get...

Hi hannshaha

Welcome to the ROG forum !

Please list your pc specs and tell us a little more about your problem, be detailed as possible.

Thank you

1) Is it advisable to have two oc profiles, one for 1080p, one for 1440p ?

Since you can get a higher overclock at 1080p, two oc profiles would be good.

2) High temp and hitting the power limit...

All right, sounds good Leeta, I'll be waiting for your results.

50c is almost water cooling temps, you're doing great there.