Search:

Type: Posts; User: Arne Saknussemm

Page 2 of 20 1 2 3 4 5

Search: Search took 0.12 seconds; generated 121360 minute(s) ago.

  1. While there are, indeed, plenty of things to play...

    While there are, indeed, plenty of things to play with in the BIOS....it can be quite simple to get a basic feel for the CPU

    If I were you I would set 1.36V and 47 multi...and then simply up the...
  2. I would try voltage tweaks first and then if that...

    I would try voltage tweaks first and then if that doesn't work...try relaxing timings

    You can also max current capability for RAM in Digi+ section
  3. Try setting system agent voltage higher...try a...

    Try setting system agent voltage higher...try a range....1.1v to 1.15...to 1.2v...set DRAM to 1.375 or 1.4
  4. You need a BIOS with AGESA 1.0.8.0 to boot with...

    You need a BIOS with AGESA 1.0.8.0 to boot with Zen 3/5000 series...so 2204 2206 on CHVIII....then update to AGESA 1.1.0.0 once those BIOS drop

    BIOS Flashback is the perfect tool for this on ASUS...
  5. I doubt this is helping ...

    I doubt this is helping

    https://rog.asus.com/forum/showthread.php?57038-Don%92t-combine-memory-kits!-The-meat-and-potatoes-overview

    but you might get lucky

    As for 5.0...there are plenty of...
  6. Maybe try to reflash the latest BIOS for the...

    Maybe try to reflash the latest BIOS for the board.... BIOS flashback method....
  7. I would start there, yes. Try changing DRAM...

    I would start there, yes. Try changing DRAM voltage to 1.35v and maybe 1.4 or 1.45..this is totally safe voltage for RAM

    Maybe look in BIOS at the system agent voltage setting...see what the board...
  8. This can of course be driver...

    This can of course be driver problems...especially if it's common to only one or two games...

    assuming it's not that the most common cause of such symptoms is RAM.

    I know it's an investment (I...
  9. Yes, this is backwards compatible with PCIe...

    Yes, this is backwards compatible with PCIe 3.0...just limited, of course, to 3.0 speeds.

    :)
  10. Replies
    7
    Views
    2,482

    OCing these GPUs can draw well over 350W...

    OCing these GPUs can draw well over 350W alone...with an OCd CPU and important headroom...you want to get a PSU that will be in the sweet spot of power delivery...not near its maximum. A good quality...
  11. Replies
    8
    Views
    639

    That board has a second BIOS chip...maybe flash...

    That board has a second BIOS chip...maybe flash current BIOS to it and see if the behaviour continues.

    I would avoid ebay for BIOS chips...many bad/non working
    ...
  12. The Zenith II Extreme is not the Zenith II...

    The Zenith II Extreme is not the Zenith II Extreme ALPHA

    The ZIIE still does not fully support the 3990X...i.e. RAM still only runs stock
  13. Hmm...I have to say that is a pretty bad...

    Hmm...I have to say that is a pretty bad result...

    I wonder what happens if you test one RAM module at a time? swingle stick at a time....I mean, not that there's one dodgy stick or something....
  14. Hi there...what voltage have you tried? 1.45...

    Hi there...what voltage have you tried?

    1.45 DRAM 1.3 SA and IO? Some of these CPUs are plain bad to get higher than 3600 on...

    The last part you answered your own question I think LOL
  15. Replies
    7
    Views
    838

    Yes...disabling MCE will make a difference. RE...

    Yes...disabling MCE will make a difference.

    RE the fans...there are fans and there are fans....lots of fans spin and move little air. Especially if they are pushing against too little exhaust.
    ...
  16. Replies
    7
    Views
    838

    Depends a bit on GPU and case airflow. If you...

    Depends a bit on GPU and case airflow. If you have little airflow through the case...the GPU will chuck out a lot of heat and that will help saturate the AIO on the CPU.

    That said those temps are...
  17. Replies
    3
    Views
    220

    That is normal...it shows OC when you OC :)

    That is normal...it shows OC when you OC :)
  18. Replies
    1
    Views
    257

    No, it wont..that is a x8 slot x16 x8 x16 x8

    No, it wont..that is a x8 slot

    x16
    x8
    x16
    x8
  19. Replies
    1
    Views
    7,328

    I haven't seen the Strix yet....not sure what...

    I haven't seen the Strix yet....not sure what concrete difference there is...maybe some components....power delivery etc.

    I have seen the TUF and thought it was a very good card....ran cool and...
  20. Unfortunately no....you need to buy a single kit...

    Unfortunately no....you need to buy a single kit of RAM that your motherboard can support (CPU too).

    Have a look for the QVL for the board etc.
  21. Sounds like fans are maybe plugged into the wrong...

    Sounds like fans are maybe plugged into the wrong place...controller? that is not turning off because ERP is not on?

    Or some other dodgy power problem...the fans and the soundwave...?

    Maybe...
  22. Not a bad card...just a regular one...

    Not a bad card...just a regular one...
  23. Replies
    4
    Views
    891

    That kind of depends on what resolution you are...

    That kind of depends on what resolution you are gaming at but in practical terms...no, not much
  24. Replies
    8
    Views
    639

    MAybe replace the BIOS battery on the board.....

    MAybe replace the BIOS battery on the board.....
  25. Replies
    1
    Views
    566

    Check your manual for this...there will be a CPU...

    Check your manual for this...there will be a CPU fan header on the board that seems not to be plugged to anything.

    Maybe that the Kraken fans are running from a different header...or from molex or...
Results 26 to 50 of 499
Page 2 of 20 1 2 3 4 5