Search:

I started a thread before finding this one, https://rog.asus.com/forum/showthread.php?120806-Nahimic-high-volume-static
What I'm experincing is: at random timing my audio will go full valume static,...

So I discoverd a few things since the last time I posted.
1. is others are complaining about audio issues,...

I must be missing something, what's crippled?
I'm runing the ZEA2 with 3990x and the only issue I have is how thick the MB is, I had to midify my standoff's for the thing not to bind against the...

I've been experiencing issues after installing version 6.3.9600.2239 of the audio drivers for my MB found here: https://www.asus.com/Motherboards/ROG-Zenith-II-Extreme-Alpha/HelpDesk_Download/
...

Running 128gb at 3200 C14 with out issue, 3990x
The VRM fans at full speed on the ZAE2 can be quite autiable and I'm deaf.
I hope this helps.
Known issue: RGB ram sticking on rainbow or some...

Did a fresh rebuild from complete reformat and reinstall.
here are the version info reportd by armoury crate.
__________________________________________________
Item Version...

Done: please see> https://rog.asus.com/forum/showthread.php?108158-AURA-SYNC-1-07-35-Report-any-issues-here&p=814808#post814808

1. The BIOS/firmware version for your hardware.
Asus Rog Zenith extream Alpha 2/ 1101

2. The AURA SYNC products you own and any other 3rd-party lighting software....

Icue was no help, doesn't see ram.
G.Skill's lighting software for their own ram only see's the right side of the board, slots: A2, A1, B2, B1 so it's worthless to try to fix slots on left side of...

Having this same issue, I've updated bios's(both) to the latest version. Deleted Asus profile in liting service per recommendation. All result in the same issue.
For me, this is affecting slots D1...

I did finally get everything connected and going but yea looks like I'll need to get the case replaced.
Never would I have ever expected the end issue to be with the case, this is a new one on me...

I've checked all the stand off's and even attempted to add hight, GPU wouldn't install correctly like that.
I'm adding some standoff washers to increase distance, if that doesn't work then I'll have...

Well working, mostly out of the case. Getting CMOS error now.
Suggestions on: How to install in the case so I don't get Memory errors? maybe some plastic spacers between MB and case?
Thanks for the...

Just tried with no ram and got the same error, Pulling MB to try out of the case.
FYI case is corsair 1000D

Remember the first MB didn't even show signs that it was getting power. I will try out...

Thanks all,
Update.
I got the CPU replaced and got the same error. I will try the MB out of the case and update.
I've not tried a different PSU, but here are the spec's: EVGA 1300 G2 (PN:...

I found the Q-Code table, thanks.

I really need to know where to look up these codes, like the one I pictured. "Memory code: 00". Can someone answer that question, at least?

Thanks for the input, but this is the 2nd board I've tried with this ram. It's getting a bit ridiculous.
I've got a buddy about an hours drive away, going to stop by to verify the ram isn't bad....

I reseated the CPU, making sure I felt and heard that audible click.
Attempted to fire the thing up and no go, same error.
Does anyone know where to look up the codes like the one I pictured? I...

Those pic's
84410
84411

Just checked every slot, same error. 84409
I'm a bit frustrated. $800 motherboard and $1200 worth of ram and they won't work together?
I'm looking back at the QVL, at ram(Might order the cheapest...

I've tried 1 stick at a time in slot A1, haven't tried any other. I've also tried all sticks, 2 slots(A1, C1) 4slots(A1, B1, C1, D1).
I've tied switching bios's (also flashed, successfully both)....

Well, bios flashback didn't make any difference.

I have all power connectors plugged in: 2x8 CPU, 6pin CPU(using VGA cable) and the Molex at the bottom left.
3990x, I do a lot of virtualization and cloud infrastructure engineering/development/QA....

84405
I hope this helps.

This MB is new out of the box, 2nd one I've tried with this ram. Ram was working with 1st gen 1950x and 1gen ZE. The only thing I can see is the "R" label I noticed none...