Page 2 of 2 FirstFirst 1 2
Results 11 to 15 of 15
  1. #11
    New ROGer Array
    Join Date
    Jan 2018
    Reputation
    10
    Posts
    13

    I'd still lean towards the power supply but if it shuts off and reboots, there's a number of things that could cause that. Software, drivers, memory, CPU, power supply, motherboard.

    If it shuts down and stays off until you turn it back on, almost certainly power supply or overheating.

  2. #12
    New ROGer Array Kirito-Kun's Avatar
    Join Date
    Feb 2018
    Reputation
    10
    Posts
    10

    Had it Running!

    So hey, me again! I had the system running for more than 24 hours without a single shutdown, what normally didn't work. The debug LED was showing 40 instead of A0, I read about the 40 as "cold boot" stuff, I don't know what exactly it was. When the system shows A0 in the debug LED it seems to crash randomly, but with the 40 it didn't happen. How can I boot into the 40 on purpose? is that actually possible?

  3. #13
    New ROGer Array
    Join Date
    Dec 2017
    Reputation
    10
    Posts
    2

    I had a similar problem when i first got this board and thought it was bad hardware. For me, it turned out that the stock settings were not stable. You can see my thread here. The system would randomly reboot, during load or during idle, sometimes overnight like you said. It would just reset with no rhyme or reason.

    I would tried tweaking the CPU settings before replacing hardware

    https://rog.asus.com/forum/showthrea...table-at-stock

  4. #14
    New ROGer Array
    Join Date
    Feb 2018
    Reputation
    10
    Posts
    1

    *I had the same problem, and it was a riser cable for my GPU.*

  5. #15
    New ROGer Array Kirito-Kun's Avatar
    Join Date
    Feb 2018
    Reputation
    10
    Posts
    10

    Hey trey, where can I find these settings you mentioned in your post? Can't seem to find 'em.


    Hey Awer, the cables seem to be fine for me. At least nothing loose.

Page 2 of 2 FirstFirst 1 2

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •