©ASUSTEK COMPUTER INC. ALL RIGHTS RESERVED.

alyraver · ‎02-17-2018

Hi all

What should I be setting this to in the bios?

I've left it at auto, but as far as I can tell 100:100 is what I need to put it at?

Also with regards to the cpu/cache current limit max and max freq ratio
What does this actually do? And what settings should I be putting in there for a 5.1ghz OC?

800D/Asus Rampage IV Extreme Black Edition/i73930K @ 5.2/ Kingston Hyper X Beast 32GB 2400/ STRIX 1080TI OC, EK Nickel Plexi CPU block, No Rad + No Fans :D, Alphacool D5 Pump.. HC 500A chiller @ 4C - Max load temp @ 5.2 = 55c. Lowest Core Idle Temp = 3c

Silent_Scone · ‎02-17-2018

1) Auto is fine

2) Current limit Auto is fine

3) Max cache/core ratio needs to be ascertained by stability testing. Vcore required is CPU dependent. Start with 1.3v for 5.0 and work up or down using your preferred stress test.

13900KS / 8000 CAS36 / ROG APEX Z790 / ROG TUF RTX 4090

BCLK Frequency : DRAM Freq Ratio?