Results 1 to 4 of 4

Threaded View

  1. #1
    New ROGer Array fillip2k PC Specs
    fillip2k PC Specs
    MotherboardMaximus VIII Ranger
    Processori5 6600K
    Memory (part number)16GB Ripjaws V 2400MHz
    Graphics Card #1EVGA 1080 FTW2
    CPU CoolerThermalright Macho rev.B
    CaseFractal Design Meshify C
    Power SupplyRMi650

    Join Date
    Feb 2017

    Noob-ish questions about my OC on Maximus VIII Ranger with i5 6600k

    Hi all,

    I have a couple of noobish questions to ask. I have been running a 4.7GHz OC (or I think I have) on my Maximus VIII Ranger i5660K now since shortly after I built the system (end of March 2016)

    The system has been stable and I have no issues as far that is concerned, over 8 hours Realbench stress test was the metric I used as my confirmation. However talking to my brother last night I realised a couple of things and I also confused myself a bit. So I'm hoping you guys can spread some sagely wisdom my way.

    Question 1: HWinfo, Realbench and CPUZ all report my freq as 4.7GHZ which is what I want (multiplier of 47) however in the BIOS in the info panel on the right hand side it comes up with 3.5Ghz and a multiplier of 35. Why is this? Have I actually got the OC I think I have?

    Question 2: This relates to LLC... I have my voltage set to 1.25 in the BIOS however under 100% load the voltage (VCORE) reported by HWinfo is 1.26 not 1.25. This is with LLC set to AUTO. Why is this? If I set the LLC to 4, which I have seen mentioned in various threads, I get a VCORE of 1.248 at 100% load however then I begin to experience stability issues.

    FYI my temps fluctuate from 59-63 degrees after 15 minutes of realbench...

    Hopefully I've made sense, and your help and advice will be greatly appreciated!
    Last edited by fillip2k; 02-27-2018 at 01:11 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts