AURA 1.05.38 [Report all issues in this thread]

[Dimitrios1971]

AURA 1.05.38

Changelog:
Can install and run on laptops and any PC platform
Can run with only Aura Sync peripherals
Update Aura desktop logo
Increase the support number of Addressable LED to 120 for each Addressable header
Improve system stability
Improve and adjust effect settings
Add multi-language support
for Windows 7 32-bit & 64-bit, Windows 8.1 64-bit, Windows 10 64-bit (support depends on CPU)

http://dlcdnet.asus.com/pub/ASUS/mb/...ol_1.05.38.zip

[Jsunn]

I'm assuming that it will find its way to the individual motherboard pages eventually?
Its not listed for my X Formula.

[KeksimusMaximus]

AURA 1.05.38

Changelog:
Can install and run on laptops and any PC platform
Can run with only Aura Sync peripherals
Update Aura desktop logo
Increase the support number of Addressable LED to 120 for each Addressable header
Improve system stability
Improve and adjust effect settings
Add multi-language support
for Windows 7 32-bit & 64-bit, Windows 8.1 64-bit, Windows 10 64-bit (support depends on CPU)

http://dlcdnet.asus.com/pub/ASUS/mb/...ol_1.05.38.zip

Hello, im very gald to see "Increase the support number of Addressable LED to 120 for each Addressable header" but now a question remains, why only 120? Is there a firmware limitation on the Asus Aura embedded controller? I was doing tests on Aura settings and at most i was able to control 128 LEDs (not 120) https://www.youtube.com/watch?v=Ub-EWTsMPkg

Please be honest with us that there is something broken inside Asus Aura embedded controller. The fact that Asus Aura is able to control at most 128 LEDs points to conclusion that probably someone somewhere who was programming Aura embedded code decided to use an signed integer 8 (int8) data type for addressing LEDs, int8 can hold values from -128 to 127, fits perfectly where 1st led is index 0 while last led is index 127.
A proper solution would be to use at least an uint8 (from 0 to 255) or even uint16 that is supported on any 8-bit microcontrollers. But that, if Asus Aura uses separate controller, is impossible to fix on existing motherboards.
So because of programmers error we are now limited only to 128 LEDs?

[Ingvarr100th]

There's still conflict between Corsair LINK and Aura...
LED effects are laggy when Corsair RAM is connected to Aura and Corsair Link is working.

[andreyMS]

AURA 1.05.38

Changelog:
Can install and run on laptops and any PC platform
Can run with only Aura Sync peripherals
Update Aura desktop logo
Increase the support number of Addressable LED to 120 for each Addressable header
Improve system stability
Improve and adjust effect settings
Add multi-language support
for Windows 7 32-bit & 64-bit, Windows 8.1 64-bit, Windows 10 64-bit (support depends on CPU)

http://dlcdnet.asus.com/pub/ASUS/mb/...ol_1.05.38.zip

How Can I manage the motherboard leds? (Alpha Hero)

[czonin]

I still can't install Aura. I've had the same issue with the last few versions. It just sits at 0% and never progresses.

[Juggalo23451]

I still can't install Aura. I've had the same issue with the last few versions. It just sits at 0% and never progresses.

You might have to install the reinstall

[theWanderer521]

There's still conflict between Corsair LINK and Aura...
LED effects are laggy when Corsair RAM is connected to Aura and Corsair Link is working.

Kindly check this out:

https://www.asus.com/campaign/aura/u...3060220_m1.pdf

Other Lighting software
Conflicts might occur between Aura and other lighting control software. If you are having problem
controlling the lighting of your Aura sync products, ensure that any other lighting control software and
its background processes are closed/uninstalled to avoid conflict.

[theWanderer521]

I still can't install Aura. I've had the same issue with the last few versions. It just sits at 0% and never progresses.

Try these methods : go to Page 3

https://www.asus.com/campaign/aura/u...3060220_m1.pdf

or if all else fails: Try using Bulk Crap Uninstaller
https://sourceforge.net/projects/bul...urce=directory

[Ingvarr100th]

Kindly check this out:

https://www.asus.com/campaign/aura/u...3060220_m1.pdf

Other Lighting software
Conflicts might occur between Aura and other lighting control software. If you are having problem
controlling the lighting of your Aura sync products, ensure that any other lighting control software and
its background processes are closed/uninstalled to avoid conflict.

I really have more knowledge than some FAQ, and I know what issue is...
But it was said that it will be under investigation with Corsair whit intent to fix this but after that declaration there is silence.
So this will be fixed or not?