AURA 1.05.38 [Report all issues in this thread]

[LordZaros]

hey, i am running a setup with an ROG IX Hero mobo, a total OF 6 cooler master rgb fans as well as a cooler master rgb liquid cooler so four devices are on my rgb top header and other three on my bottom rgb header. with aura everything is synched perfectly to my mobos already included rgb lights its really nice, especially in music mode but then i got the ROG 1060 strix, it cant do any other shade of blue but a dark one so it just looks wacky when in music mode and full color cycle but as long as the color isnt blue my gpu is in tune with everything els. im just wondering if anyone els here notices this

[timsar456]

i just built my first pc
specs:
Z370-F Strix Gaming
Core I5 8600K
16gb (2x8) G.Skill Ripjaws V 2400Mhz
MSI 1060 Gaming X 6gb
DeepCool Gammaxx GT RGB Cpu Tower Cooler
Green 650W 80+ Gold PSU
Samsung 860 EVO 250gb SSD
Western Digital Blue 1TB WD10EZEX

i started the pc and everything was working fine.
but i was having problems with the bios so i updated it to the latest version
but since then the rgb lighting on the motherboard will not turn on.
when i cut the power supply and then turn it back on again the cpu cooler lighting turns on but fades in the matter of minutes.
keep in mind the motherboard rgb light does not turn on whatsoever.

things i have tried :
reinstall and clean install of Asus Aura ( all version available )
reinstalling windows completely and cleanly (full partition wipe of drives and then repartitioning them)
flashing bios to an earlier version.
but the ez flash 3 utility does not allow me to flash it back more than a couple of versions. meaning i cant flashback to the bios included in the dvd. (gives "cant read the bios file" error)

keep in mind that both the rgb lighting options in the BIOS are ON and the ERP is off.

i also tried this https://rog.asus.com/forum/showthrea...-AMD-roll-back
but in the DOS page it gives an Error 22 - Problem Allocating Memory. (i posted the full problem in the thread also)

[jcdu4u]

I have the same problem here with the "Please reboot your computer to complete the installation" message.

Tried to deinstall, clean the registry with CC Cleaner, AuraCleaner and reinstall but without success. Reinstalling the Nvidia Driver did not work either.
I hope to see a new Version which fixes this issue very soon.

Had the same issue when I installed under Standard User Account "as Admin" and rebooted into Standard User Account.

This solved it for me:
Install Aura under Admin User Account and reboot into Admin User Account, so the installation process can finish its task.

jcdu4u

[Zeroed85]

I've been struck by the missing motherboard in Aura again and unfortunately the power down, pull PSU plug and reset CMOS trick is not cutting it this time. Was there any other solution found for the loss of motherboard detection?

[Terepin]

The fact that no one from ASUS will comment on these countless issues speaks volume.

[Zeroed85]

Before pulling the PSU plug and resetting the CMOS uninstall the Aura software. I reinstalled Windows today for other reasons but Aura is working again now that I have reinstalled it. I think when the motherboard becomes not detected in Aura there is an issue with the software as well as the firmware on the motherboard. Usually when this happens the software starts crashing and giving errors. So try uninstalling, clearing CMOS and then reinstalling. Cmon Asus are you looking into this?

[IIIXJannikXIII]

I am experiencing a very weird bug.
I have an external soundcard connected to my system, a creative soundblaster x-fi hd.
For some software issue reason it does not work after my system is started, I have to re-connect it after every start in order to make it work.
But the thing is, when I start my system, the ram is not synced with the rest of the system. As soon as I unplug the soundcard, it instantly syncs.
After re-connecting the soundcard everything stays fine.

[serafearz]

For anyone with this stupid reboot message and can't open Aura, please run this regedit

At first, all RGB strips + DRAM + motherboard + settings showed, however the hue search failed, now after restarting the APP only DRAM shows...WTF?


Also version 1.06.28 doesn't work on Maximus X Code, only .17 works...

But now I only have DRAM...

[Terepin]

For anyone with this stupid reboot message and can't open Aura, please run this regedit

At first, all RGB strips + DRAM + motherboard + settings showed, however the hue search failed, now after restarting the APP only DRAM shows...WTF?


Also version 1.06.28 doesn't work on Maximus X Code, only .17 works...

But now I only have DRAM...

Still crashes on start.

[serafearz]

My solution solves the reboot message on start, if it crashes, i found out that the latest version .29 doesn't work on Z370, only on X99

Still crashes on start.