©ASUSTEK COMPUTER INC. ALL RIGHTS RESERVED.

Dogeared · ‎02-27-2018

Hi folks

I have an issue trying to enable dual channel on this board. I have enabled XMP and have the dimms in the grey slots a1, b1, c1, d1. They are working but not performing well as shown in the UserBenchmark http://www.userbenchmark.com/UserRun/7550340

CPU: Intel Core i7-7800X - 108.7%
GPU: Nvidia GTX 970 - 65.1%
SSD: Samsung 960 Evo NVMe PCIe M.2 250GB - 223.1%
SSD: Samsung 850 Pro 256GB - 111.9%
SSD: Samsung 840 120GB - 56%
RAM: Corsair Vengeance LPX DDR4 3000 C15 4x8GB - 84.6%
MBD: Asus TUF X299 MARK 2
Windows 10 64

I tried clearing the CMOS and running one dimm and two dimms but no difference.

CPU-Z has DC mode box blanked out.

Any input would be very welcome, thanks

Dogeared · ‎02-27-2018

Running most up to date BIOS (1102)

Arne_Saknussemm · ‎02-27-2018

Hey Dogeared 🙂

What is CPUz reporting for speed?

You have a quad channel board and the RAM should be working quad channel....just check it's running at 3000MHz not 2666

ARNE’S GUIDE TO PC BUILDING HAPPINESS

ARNE'S GUIDE TO OVERCLOCKING HAPPINESS

Dogeared · ‎02-27-2018

Hello mate 🙂 Here's a screenie from CPU-Z

Dogeared · ‎02-27-2018

Ok, so it's running slightly overclocked 2666

Arne_Saknussemm · ‎02-27-2018

Does it have a couple of XMP profiles? maybe one 2666 and one 3000...I presume the benchmark is measuring that 80 odd percent as not 3000...

Basically calling you out for not OCing it to it's rated speed hehe

ARNE’S GUIDE TO PC BUILDING HAPPINESS

ARNE'S GUIDE TO OVERCLOCKING HAPPINESS

Dogeared · ‎02-27-2018

No it has disabled or profile1, I may be able to tweak it up to 3000 however, I'll have a look 🙂

SO I take it dual channel doesn't apply then

Dogeared · ‎02-27-2018

God I sound such a newbie 😛

gupsterg · ‎02-27-2018

Quad is more desirable IMO 😉 .

Using slots A1, B1, C1, D1 = Quad channel.

Using slots A1, A2, C1, C2 = Dual channel.

Intel Defector :eek: AMD Rebel

R9 5900X - Custom WC - ASUS Crosshair VII Hero WiFi - Ballistix Sport LT 2x16GB 3800MHz C16 - RX 6800 XT - WD SN770 2TB - 2x 870 EVO 4TB

24/7 OC: i5 4690K @ 4.9GHz CPU@1.255v 4.4GHz Cache@1.10v - Archon SB-E X2 - Asus Maximus VII Ranger
Sapphire Fury X (1145/545 ~17.7K GS 3DM FS)
:eek: CPU Validation 5.198GHz@1.314v with 4.4GHz cache + RAM 2400MHz@1T :eek:
Da Music video

Arne_Saknussemm · ‎02-27-2018

Dogeared wrote:
SO I take it dual channel doesn't apply then

No...unless...

What is the exact kit part number?

If it's 3000 rated it ought to have a 3000 profile...

Is it a single quad channel kit? or two dual channel kits combined?

ARNE’S GUIDE TO PC BUILDING HAPPINESS

ARNE'S GUIDE TO OVERCLOCKING HAPPINESS

No Dual Channel on TUF X299 Mark2