Results 1 to 3 of 3
  1. #1
    New ROGer Array
    Join Date
    Aug 2016
    Reputation
    10
    Posts
    4

    Spatha bricked for no apparent reason? [Resolved]

    Hi guys, ive had this Spatha for about 2 years now and I've never seen anything like this.

    Here are the symptoms:

    -All LED (AURA lights AND the DPI LED) lights up as blue as long as there's power supplied to the mice. Last time it worked it was set as breathing red.
    -Doesn't respond to pairing attempts
    -Does work at all. Not in windows nor UEFI. Doesn't work when I connect it to my macbook as well.

    It was working fine the last time I used it connected to a Z170 Pro Gaming based PC. Once I tried connecting it to my new Maximus X based pc on the BIOS USB 2.0 socket it's been like this. Any ideas?

  2. #2
    Administrator Array MasterC@ASUS's Avatar
    Join Date
    Aug 2014
    Reputation
    96
    Posts
    1,492

    You can check if the MCU is causing the mouse to crash.
    1. Remove the four screw covers.
    2. Open up the Spatha by using the supplied screwdriver to remove the four screws. This will not void the warranty since the same procedure applies when swapping switches.
    3. Disconnect then reconnect the battery connector (see below).
    Attachment 71336
    4. Reassemble the Spatha.
    5. Test the mouse and update the firmware.

  3. #3
    New ROGer Array
    Join Date
    Aug 2016
    Reputation
    10
    Posts
    4

    That worked. Thanks.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •